Author Topic: Plugin: Laurent Module Control 2  (Read 1540 times)

Offline Pyatovsky

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Plugin: Laurent Module Control 2
« on: April 28, 2016, 02:28:39 pm »
Plugin for control some ethernet-relay boards Laurent type (http://www.kernelchip.ru/). Now supported Laurent, Laurent-2 (MP712) and Laurent-2G (MP718) (Relays, outlines, inlines and temperature sensor yet).

Features:
- Control of power switches (1-4) and display it status
- Control of output lines (1-12) and display it status
- Displays a status of input lines (1-6)
- Creating standard switches, temperature sensor and door and motion sensors in the controller interface for control and show status

Compatibility:
- UI7 only
- Vera 3 and Vera Edge (tested). No information about other Veras but it should be OK
- Laurent and Laurent-2 (mp-712), Laurent-2G (mp-718) modules (tested)

Current version is 2.0

Apps market: apps.mios.com/plugin.php?id=8681

User manual (Eng+Rus): https://drive.google.com/open?id=0B6bs8cRm74RlNGhIV3ZMTTlnRGM

Files: https://drive.google.com/open?id=0B6bs8cRm74RlMnVVRTZfei10RjA

Status icons: https://drive.google.com/file/d/0B6bs8cRm74RlU1B2ZzVNaVNEekk/view?usp=sharing

Offline kiber111

  • Jr. Member
  • **
  • Posts: 50
  • Karma: +0/-3
Re: Plugin: Laurent Module Control 2
« Reply #1 on: July 23, 2016, 10:19:51 am »
Yes, it works fine
Thank you

Offline Pyatovsky

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: Plugin: Laurent Module Control 2
« Reply #2 on: December 06, 2016, 10:59:56 am »
New revision - 3.1

Now supports MP716 Laurent-112 (but not tested, sorry)

Attention! Not compatible with previous versions of the plugin! It is necessary to remove all devices and re-create it all over again!

Files:
drive.google.com/file/d/0B6bs8cRm74RlcTVmVmhaUUdrUEU/view

Short description:
drive.google.com/file/d/0B6bs8cRm74RlemlkU0FTQzh5X2c/view

Apps market:
apps.mios.com/plugin.php?id=8810
« Last Edit: December 06, 2016, 11:13:09 am by Pyatovsky »

Offline lexalexalexa

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Re: Plugin: Laurent Module Control 2
« Reply #3 on: August 31, 2018, 07:50:54 am »
Hello to all!

I was need to add PWM control to module and made changes for it. May be someone needs same features (see module in attachment).

I'm add to module some features:
- PWM dimmer module device;
- ADC and Counter inputs generic devices (added multiply variables to this inputs).

All of this devices can be added from control interface of module.

Laurent_V_3.2.zip