We have moved at community.getvera.com

Author Topic: Got OpenLuup running on Docker. Can login to port 3480 and AltUI shows...  (Read 424 times)

Offline Sender

  • Hero Member
  • *****
  • Posts: 973
  • Karma: +552/-467
  • Sr. manager of my Vera
Just trying to play with this.

Got OpenLuup running on Docker. Can login to port 3480 and AltUI shows...

but then... How do I connect to Vera?

Is there any risk that Vera (which is fully running with all apps locally installed including an altui etc. connected to a new openluup instance?

EDIT: added the IP address of vera in the altui app settings of the docker container showing all my devices and apps... remains the question: is this safe?
« Last Edit: October 05, 2018, 04:15:58 am by Sender »
Good firmware is more important than good karma. (and this costed me lots of Karma)

Offline akbooer

  • Moderator
  • Master Member
  • *****
  • Posts: 6387
  • Karma: +292/-70
  • "Less is more"
To link openLuup itself (rather than just AltUI) to Vera, you need simply to install the VeraBridge plugin (on the openLuup Plugins page) and put in the IP address of the Vera in the IP attribute of the bridge device.  Nothing is needed on the Vera side.

I have multiple Veras connected to multiple openLuup systems.  Not sure what issues you're worried about, but there's really no problem AFAIK.  I'm speaking in the context of openLuup itself, and not specifically on the Docker installation, about which I know absolutely nothing.
3x Vera Lite-UI5/Edge-UI7, 25x Fibaro, 23x TKB, 9x MiniMote, 2x NorthQ Power, 2x Netatmo, 1x Foscam FI9831P, 9x Philips Hue,
Razberry, MySensors Arduino, HomeWave, AltUI, AltHue, DataYours, Grafana, openLuup, ZWay, ZeroBrane Studio.

Offline Sender

  • Hero Member
  • *****
  • Posts: 973
  • Karma: +552/-467
  • Sr. manager of my Vera
To link openLuup itself (rather than just AltUI) to Vera, you need simply to install the VeraBridge plugin (on the openLuup Plugins page) and put in the IP address of the Vera in the IP attribute of the bridge device.  Nothing is needed on the Vera side.

I have multiple Veras connected to multiple openLuup systems.  Not sure what issues you're worried about, but there's really no problem AFAIK.  I'm speaking in the context of openLuup itself, and not specifically on the Docker installation, about which I know absolutely nothing.

Hi, how do I get to the "openluup plugins" page?
Good firmware is more important than good karma. (and this costed me lots of Karma)

Offline ChrisTheC

  • Full Member
  • ***
  • Posts: 146
  • Karma: +4/-1
  • Baltimore, MD & Washington, DC
Hi, how do I get to the "openluup plugins" page?

You can access the "plugins" page from the ALTUI pulldown menu "More" > Plugins

openLuup with ALTUI, ALTHUE, 8x iPhoneLocators, Harmony Hub, Honeywell Wifi T-stat, Foscam Fi8608w & 2x R2, bridged to . . .
Vera 3/UI5 with Schlage BE469NX, 3x EZMotion+, 3x Ecolink PIR, 3x Schlage door sensors, 2x Aeotec micro switches, 2x Aeotec appliance switches, Leviton RZM10 & DZMX1, Wemo

Offline Sender

  • Hero Member
  • *****
  • Posts: 973
  • Karma: +552/-467
  • Sr. manager of my Vera
Hi, how do I get to the "openluup plugins" page?

You can access the "plugins" page from the ALTUI pulldown menu "More" > Plugins

Found that (before) but how do I install "VeraBridge plugin" there then?
Good firmware is more important than good karma. (and this costed me lots of Karma)

Offline akbooer

  • Moderator
  • Master Member
  • *****
  • Posts: 6387
  • Karma: +292/-70
  • "Less is more"
Found that (before) but how do I install "VeraBridge plugin" there then?

...just press the Update button.
3x Vera Lite-UI5/Edge-UI7, 25x Fibaro, 23x TKB, 9x MiniMote, 2x NorthQ Power, 2x Netatmo, 1x Foscam FI9831P, 9x Philips Hue,
Razberry, MySensors Arduino, HomeWave, AltUI, AltHue, DataYours, Grafana, openLuup, ZWay, ZeroBrane Studio.

Offline Sender

  • Hero Member
  • *****
  • Posts: 973
  • Karma: +552/-467
  • Sr. manager of my Vera
Found it... it was professionally hidden there.

next step, vera is found... I see the devices from there and from altui... and then :-)?
Good firmware is more important than good karma. (and this costed me lots of Karma)

Offline akbooer

  • Moderator
  • Master Member
  • *****
  • Posts: 6387
  • Karma: +292/-70
  • "Less is more"
next step, vera is found... I see the devices from there and from altui... and then :-)?

Use the VeraBridge action CopyFiles to get all the relevant device files copied across (doesn't need an argument in the box, just blank is fine.)

From then on, pretty much forget Vera and do your HA logic on openLuup.
3x Vera Lite-UI5/Edge-UI7, 25x Fibaro, 23x TKB, 9x MiniMote, 2x NorthQ Power, 2x Netatmo, 1x Foscam FI9831P, 9x Philips Hue,
Razberry, MySensors Arduino, HomeWave, AltUI, AltHue, DataYours, Grafana, openLuup, ZWay, ZeroBrane Studio.