Author Topic: How do I maintain current dim level when motion is detected and until no...?  (Read 527 times)

Offline Maykinit

  • Newbie
  • *
  • Posts: 13
  • Karma: +2/-0
How do I maintain current dim level when motion is detected and until no additional motion is detected? I have six overhead lamps tied to a Zooz dimmer.  I have a motion control in the room.  How do I...
When motion is detected, turn trigger the dimmer to a preset level.  Lets say 30%.  I raise the dimmer level to 50%. 
How do I maintain that 50% level until there is no longer any motion?  A pointer or pointers to examples would be so appreciated.
« Last Edit: October 27, 2018, 07:38:49 pm by Maykinit »

Offline rigpapa

  • Beta Testers
  • Hero Member
  • *****
  • Posts: 767
  • Karma: +116/-1
Reactor: one condition group with two conditions:

1) Zooz dimmer is off (SwitchPower1/Status = 0)
2) Motion detected (SecuritySensor1/Tripped = 1)

Action: run scene to set dimmer to 30%. The above condition group will not trip again if there is motion and the light is already on or has been changed to anything other than 0%.
Author of Reactor, DelayLight, SiteSensor, Rachio, Deus Ex Machina II, Intesis WMP Gateway, Auto Virtual Thermostat and VirtualSensor plugins. Vera Plus w/100+ Z-wave devices. Vera3 sandbox.

Offline Maykinit

  • Newbie
  • *
  • Posts: 13
  • Karma: +2/-0
Awesome tool!  Thank you, thank you!