Author Topic: Anyone tried this Keypad?  (Read 1756 times)

Offline Jamr

  • Hero Member
  • *****
  • Posts: 812
  • Karma: +28/-8
Anyone tried this Keypad?
« on: October 31, 2018, 12:55:34 pm »
I noticed that the latest Vera firmware now includes support for the Centralite 3-Series Security Keypad 3400-G
"NEWLY INTEGRATED DEVICES
Garage Door Controller
* Digital Home Systems zConnect Garage Door Controller DHS-WIN-GDC-02
Panic Button
* Philio Panic Button PSR03-C
Sensors and Multi Sensors
* Ei Electronics Z-Wave Smart Carbon Monoxide Alarm EIA207RFZ
* Sercomm High Power Micro D/W sensor SZ-DWS08N
* Sercomm Water Detector SZ-WTD03N
* Zooz 4-in-1 Sensor Ver. 2.0 ZSE40
Switches and Dimmers
* Leviton Dimmer DZ6HD
* Leviton Dimmer DZ1KD
* Leviton Plug-In Dimmer DZPD3
* Leviton Plug-In Outlet DZPA1
* Leviton Switch DZ15S
Thermostat
* GoControl Battery-Powered Z-Wave Thermostat GC-TBZ48 (Z-Wave Plus)
Keypad
* Centralite 3-Series Security Keypad 3400-G"

It appears that is is Zigbee only so that will limit the compatibility to the Vera Plus users, but if you are looking for a wireless keypad, this may work for you.
https://centralite.com/products/security-keypad

Please give us some feedback if anyone is using it.

Offline Sorin

  • Administrator
  • Hero Member
  • *****
  • Posts: 1048
  • Karma: +84/-10
Re: Anyone tried this Keypad?
« Reply #1 on: November 01, 2018, 06:38:44 am »
This Keypad bring the capability of a regular Alarm Panel.

Basically it sets the controller to Home and Away based on a pre-configured pincodes and a delay exit based on the settings configured in House Modes.

It is a Zigbee keypad and works with VeraPlus and VeraSecure. Build quality and materials are very good as well.
Sorin M. ▾ Community Manager
Vera Control, Ltd. ▾ Smarter Home Control  ▾ support@getvera.com ▾www.getvera.com ▾ +1 (866) 966-2272

HOURS OF OPERATION for Customer Care Department - 24/7

Offline Jamr

  • Hero Member
  • *****
  • Posts: 812
  • Karma: +28/-8
Re: Anyone tried this Keypad?
« Reply #2 on: November 02, 2018, 01:20:11 pm »
Thanks for the feedback.

Offline Neight

  • Newbie
  • *
  • Posts: 10
  • Karma: +0/-0
Re: Anyone tried this Keypad?
« Reply #3 on: Today at 09:19:30 am »
I have a 3400-X from my old Smartthings system, is that compatable as well?