We have moved at community.getvera.com

Author Topic: Anyone tried this Keypad?  (Read 2733 times)

Offline Jamr

  • Hero Member
  • *****
  • Posts: 847
  • Karma: +30/-8
Anyone tried this Keypad?
« on: October 31, 2018, 12:55:34 pm »
I noticed that the latest Vera firmware now includes support for the Centralite 3-Series Security Keypad 3400-G
"NEWLY INTEGRATED DEVICES
Garage Door Controller
* Digital Home Systems zConnect Garage Door Controller DHS-WIN-GDC-02
Panic Button
* Philio Panic Button PSR03-C
Sensors and Multi Sensors
* Ei Electronics Z-Wave Smart Carbon Monoxide Alarm EIA207RFZ
* Sercomm High Power Micro D/W sensor SZ-DWS08N
* Sercomm Water Detector SZ-WTD03N
* Zooz 4-in-1 Sensor Ver. 2.0 ZSE40
Switches and Dimmers
* Leviton Dimmer DZ6HD
* Leviton Dimmer DZ1KD
* Leviton Plug-In Dimmer DZPD3
* Leviton Plug-In Outlet DZPA1
* Leviton Switch DZ15S
Thermostat
* GoControl Battery-Powered Z-Wave Thermostat GC-TBZ48 (Z-Wave Plus)
Keypad
* Centralite 3-Series Security Keypad 3400-G"

It appears that is is Zigbee only so that will limit the compatibility to the Vera Plus users, but if you are looking for a wireless keypad, this may work for you.
https://centralite.com/products/security-keypad

Please give us some feedback if anyone is using it.

Offline Sorin

  • Administrator
  • Hero Member
  • *****
  • Posts: 1135
  • Karma: +103/-11
Re: Anyone tried this Keypad?
« Reply #1 on: November 01, 2018, 06:38:44 am »
This Keypad bring the capability of a regular Alarm Panel.

Basically it sets the controller to Home and Away based on a pre-configured pincodes and a delay exit based on the settings configured in House Modes.

It is a Zigbee keypad and works with VeraPlus and VeraSecure. Build quality and materials are very good as well.
Sorin M. ▾ Community Manager
Vera Control, Ltd. ▾ Smarter Home Control  ▾ support@getvera.com ▾www.getvera.com ▾ +1 (866) 966-2272

HOURS OF OPERATION for Customer Care Department - 24/7

Offline Jamr

  • Hero Member
  • *****
  • Posts: 847
  • Karma: +30/-8
Re: Anyone tried this Keypad?
« Reply #2 on: November 02, 2018, 01:20:11 pm »
Thanks for the feedback.

Offline Neight

  • Newbie
  • *
  • Posts: 10
  • Karma: +0/-0
Re: Anyone tried this Keypad?
« Reply #3 on: December 18, 2018, 09:19:30 am »
I have a 3400-X from my old Smartthings system, is that compatable as well?

Offline amgold

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Re: Anyone tried this Keypad?
« Reply #4 on: February 03, 2019, 10:36:15 am »
I think I need help getting my keypad to work....

I bought the Lowes Iris 3405-L1 keypad.  It pairs successfully as a Centralite 3400 keypad with my Vera Plus.

When I put in a pin, it shows in the PIN code list in the VERA UI, but the keypad never recognizes the PIN as a valid code.

Offline Sorin

  • Administrator
  • Hero Member
  • *****
  • Posts: 1135
  • Karma: +103/-11
Re: Anyone tried this Keypad?
« Reply #5 on: February 04, 2019, 08:14:32 am »
@amgold

It seems that this is a rebranded version of the Centralite 3400 keypad. If the label is the only difference it should work.

There is a certain procedure for this keypad in terms of usage:  First, press the House mode button on the keypad-> Then, punch in the pin.

For the final verdict, I encourage you to check with our Customer Care team and see if they can do something about this.
« Last Edit: February 04, 2019, 08:36:52 am by Sorin »
Sorin M. ▾ Community Manager
Vera Control, Ltd. ▾ Smarter Home Control  ▾ support@getvera.com ▾www.getvera.com ▾ +1 (866) 966-2272

HOURS OF OPERATION for Customer Care Department - 24/7

Offline amgold

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Re: Anyone tried this Keypad?
« Reply #6 on: February 04, 2019, 10:11:08 am »
After further debugging, I found by looking at the image of the Centralite (https://www.centralite.com/products/security-keypad), that the Iris Keypad (https://www.lowes.com/pd/Iris-White-Security-Alarm-Keypad/999925326) is "upside down" from the centralite.

To enter PIN 1111 and Home on the Iris i would need to press Panic-Panic-Panic-Panic-ON.

Either my unit is messed up, or it is slightly more than a rebrand. 

Offline kigmatzomat

  • Sr. Member
  • ****
  • Posts: 377
  • Karma: +23/-0
Re: Anyone tried this Keypad?
« Reply #7 on: February 05, 2019, 11:55:49 pm »
Holy Hannah, a physical implementation of ROT13 encryption.....

Offline Nobber

  • Jr. Member
  • **
  • Posts: 53
  • Karma: +0/-0
Re: Anyone tried this Keypad?
« Reply #8 on: March 02, 2019, 08:48:33 am »
Hello

Anyone know where I can get one of these in the UK, thanks

Offline slugline

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Re: Anyone tried this Keypad?
« Reply #9 on: March 11, 2019, 11:19:01 am »
I added the Centralite keypad to my system and it seems to be working OK so far. My main nitpick is that Vera seems to be treating every code entry as a security alert and sends notification to my mobile phone. I'd like the option to turn those off or limit them to just unsuccessful code attempts. I don't really need notifications every time the keypad is used. (Just like I wouldn't need notification of every single time a door/window sensor is triggered in Home mode either.)  As a new Vera owner, I've been digging through the Dashboard and haven't found a simple way to customize this. Thoughts from any other Centralite keypad owners? Have I overlooked a setting somewhere?
« Last Edit: March 11, 2019, 05:14:22 pm by slugline »