We have moved at community.getvera.com

Author Topic: Aeotec NanoMote Quad (ZWA003)  (Read 278 times)

Offline MichaelCoffin

  • Jr. Member
  • **
  • Posts: 64
  • Karma: +2/-0
Aeotec NanoMote Quad (ZWA003)
« on: March 10, 2019, 10:30:34 pm »
Has anybody been able to get the Aeotec NanoMote Quad (ZWA003) configured on Vera?  I'm use VeraEdge and have tried adding it as a generic z-Wave device, but it keeps hanging with a message saying "Waiting for wakeup to configure device".  I'm on a VeraEdge with firmware 1.7.4001.

-MC

Offline Cristina

  • Support
  • Jr. Member
  • *****
  • Posts: 68
  • Karma: +7/-0
Re: Aeotec NanoMote Quad (ZWA003)
« Reply #1 on: March 11, 2019, 05:05:56 am »
Hello,

Please note that we have made a request to our development team to work on integrating this device, with our platform.

When the message "Waiting for wake-up to configure device" shows up, you need to force the device to wake-up, while it's closer to the unit ( 3 -5 feet away ). Please check the manual and try to do this procedure.

Thank you and Have a nice day,

Offline Catman

  • Sr. Member
  • ****
  • Posts: 338
  • Karma: +10/-0
Re: Aeotec NanoMote Quad (ZWA003)
« Reply #2 on: March 11, 2019, 05:24:38 am »
Assuming the correct manual:

Pressing and holding button for 5 seconds and then release so the NanoMote Quad will wake upitself and send wake-up notification out to Z-Wave Controller. After that, it can be operated toupdate parameters, OTA, and detect battery level etc.

https://www.manualslib.com/manual/1403247/Aeotec-Nanomote-Quad.html?page=5#manual

C

Offline MichaelCoffin

  • Jr. Member
  • **
  • Posts: 64
  • Karma: +2/-0
Re: Aeotec NanoMote Quad (ZWA003)
« Reply #3 on: March 11, 2019, 08:57:52 am »
I did try that, but just to be sure I unpaired/deleted the device and re-added it - waking up the NanoMote when the first "waiting for wakeup" message appeared on the UI.  The device is 1 foot from the Vera controller.  It seemed to get farther along this time, but was still not configured.  I tried doing "Configure Node Right Now" which produced error message "ERROR: Unable to get any information on node", here is a snip from the log the NanoMote is device 154:

Code: [Select]
03/11/19 8:36:31.321 JobHandler_LuaUPnP::HandleActionRequest device: 154 service: urn:micasaverde-com:serviceId:HaDevice1 action: Reconfigure <0x74104520>
08 03/11/19 8:36:31.321 JobHandler_LuaUPnP::HandleActionRequest argument id=lu_action <0x74104520>
08 03/11/19 8:36:31.322 JobHandler_LuaUPnP::HandleActionRequest argument serviceId=urn:micasaverde-com:serviceId:HaDevice1 <0x74104520>
08 03/11/19 8:36:31.322 JobHandler_LuaUPnP::HandleActionRequest argument action=Reconfigure <0x74104520>
08 03/11/19 8:36:31.322 JobHandler_LuaUPnP::HandleActionRequest argument DeviceNum=154 <0x74104520>
08 03/11/19 8:36:31.322 JobHandler_LuaUPnP::HandleActionRequest argument rand=0.056853965149841756 <0x74104520>
02 03/11/19 8:36:31.322 Device_Basic::m_eConfigured_set device 154 was -1 now 0 zw clear <0x74104520>
06 03/11/19 8:36:31.323 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:HaDevice1 variable: Configured was: -1 now: 0 #hooks: 0 upnp: 0 skip: 0 v:0x11e26f8/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.323 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:HaDevice1 variable: LastUpdate was: EMPTY now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.324 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: ConfiguredWakeupInterval was: EMPTY now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.324 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: Capabilities was: 83,156,1,4,24,1,R,B,RS,|85,89S,90S,91S,94,108,112S,114S,115S,122S,128S,132S,133S,134S,152,159, now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.324 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: VersionInfo was: 3,4,61,1,2 now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.325 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: FirmwareInfo was: 881,769,22860 now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.325 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: ManufacturerInfo was: 881,258,3 now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.325 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: Neighbors was:  now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:1 <0x74104520>
06 03/11/19 8:36:31.326 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: LastReset was: 0 now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.326 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: MultiChEndpoint was: EMPTY now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.326 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: MultiChCapabilities was: EMPTY now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.326 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: AssociationNum was: 0 now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.327 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: ConfiguredName was: EMPTY now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.327 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: ConfiguredVariable was: EMPTY now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.327 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: ConfiguredAssoc was: EMPTY now: *RECONFIG* #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.328 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: NodeInfo was: 55,5e,6c,98,9f, now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.328 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: MeterType was: EMPTY now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.328 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: MeterScale was: EMPTY now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.329 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: SetPointInfo was: EMPTY now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.329 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: SensorMlType was: EMPTY now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.329 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: SensorBiType was: EMPTY now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.330 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: SensorMlScale was: EMPTY now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.330 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: SubscribedAlarms was: EMPTY now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x74104520>
02 03/11/19 8:36:31.351 Device_Basic::m_eConfigured_set device 154 was 0 now -2 zw configuring <0x74104520>
06 03/11/19 8:36:31.352 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:HaDevice1 variable: Configured was: 0 now: -2 #hooks: 0 upnp: 0 skip: 0 v:0x11e26f8/NONE duplicate:0 <0x74104520>
06 03/11/19 8:36:31.354 Device_Variable::m_szValue_set device: 1 service: urn:micasaverde-com:serviceId:ZWaveNetwork1 variable: NetStatusText was: OK now: #73: Please wait! Getting the name #hooks: 0 upnp: 0 skip: 0 v:0x1300e50/NONE duplicate:0 <0x76504520>
06 03/11/19 8:36:33.023 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: NodeInfo was:  now: 55,5e,6c,98,9f, #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x76504520>
06 03/11/19 8:36:33.024 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: PollSettings was: EMPTY now: 10800 #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x76504520>
06 03/11/19 8:36:33.024 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: Capabilities was:  now: 83,156,1,4,24,1,R,B,RS,|85,94,108,152,159, #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x76504520>
06 03/11/19 8:36:33.025 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: Neighbors was:  now:  #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:1 <0x76504520>
06 03/11/19 8:36:33.025 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: LastReset was:  now: 0 #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x76504520>
06 03/11/19 8:36:33.025 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:ZWaveDevice1 variable: AssociationNum was:  now: 0 #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x76504520>
04 03/11/19 8:36:33.026 <Job ID="18" Name="getnodedetails 73" Device="154" Created="2019-03-11 8:36:31" Started="2019-03-11 8:36:31" Completed="2019-03-11 8:36:33" Duration="1.672377000" Runtime="1.670719000" Status="Successful" LastNote=""/> <0x76504520>
02 03/11/19 8:36:33.027 ZWJob_ConfigureNode::Run job job#17 :conf_jh#73 dev:154 (0x1461460) P:14 S:1 Id: 17 node 73 aborting because of ZWJob_GetNodeDetails job#18 :getnodedetails 73 dev:154 (0x1365d90) P:13 S:4 Id: 18 with status 4 and 5 commands quit 0 <0x76504520>
02 03/11/19 8:36:33.027 Device_Basic::m_eConfigured_set device 154 was -2 now -1 zw configuring nr1 <0x76504520>
06 03/11/19 8:36:33.027 Device_Variable::m_szValue_set device: 154 service: urn:micasaverde-com:serviceId:HaDevice1 variable: Configured was: -2 now: -1 #hooks: 0 upnp: 0 skip: 0 v:0x11e26f8/NONE duplicate:0

-MC

« Last Edit: March 11, 2019, 09:18:25 am by MichaelCoffin »