Dutch Smart meter additional plug in

[huib]

@cmbeek

do you see at the dashboard the minutes changing every minute (max delay is one minute)

try reboot; if the minutes are changing the plug in is running
if no the plug in is not running

if yes ; if it stops after midnight it is an error in the variables

if yes and it keeps on runnig after midnight it is getting no data from the dutchg smart meter

possible you checked it a dozen times; the device numbers are correct?

pls advice
rgds
huib

[cmbeek]

The minutes and date are not changing, not even after reboot.
So, plugin is not running. I will investigate that tonight....

Device nummers are 100% correct.....

Another thing I noticed:
When opening the  S_dutchSmartMeterCounter.xml file straight from the forum in my xml-editor, it says:
"Error at line 944, column 5: mismatched tag". Could this be the reason?

[huib]

@cmbeek

had a look
in the version on my laptop i got an error

try this version now:

[cmbeek]

No better result than before:
Luup files are uploaded, device is created, ID's are set (and file is uploaded again). Luup code is run to set all variables to zero. This all results in minutes and everything else staying on zero's.

Reboot of device didn't help either....

Luupcode is definitly not running. Checked \etc and could not find any of files created by code in "I_dutchSmartMeterCounter".

If your vera is working, is it an idea to download your files from your vera and post those files?
Just looking for a solution since I love the idea of your plugin. And if its is working on one vera.......

Thanks again.

[Crismaison]

Mine is also not updating anymore. Could you upload the original version?

[huib]

@screamhouse
@cmbeek

pls find attached the files downloaded from the veralite a few minutes ago
try it and let me know, cause i am puzzled

after uploading pls check if you see any information with the following link in your brouser
http://ip:3480/data_request?id=status&output_format=xml&DeviceNum=xx

ip = ip adess of your vera
xx = device number

rgds
huib

[Crismaison]

I think we are back in business:

<root LoadTime="1360100730" DataVersion="9" UserData_DataVersion="" TimeStamp="1360100811" ZWaveStatus="1" LocalTime="2013-02-05 22:46:51 N">
<Device_Num_205 status="-1">
<states>
<state id="185" service="urn:Kuiper-com:serviceId:dutchSmartMeterCounter" variable="Day" value="5"/>
<state id="186" service="urn:Kuiper-com:serviceId:dutchSmartMeterCounter" variable="TypeDay" value="Tuesday"/>
<state id="187" service="urn:Kuiper-com:serviceId:dutchSmartMeterCounter" variable="Month" value="2"/>
<state id="188" service="urn:Kuiper-com:serviceId:dutchSmartMeterCounter" variable="TypeMonth" value="February"/>
<state id="189" service="urn:Kuiper-com:serviceId:dutchSmartMeterCounter" variable="Year" value="0"/>
<state id="190" service="urn:Kuiper-com:serviceId:dutchSmartMeterCounter" variable="Minutes" value="46"/>
<state id="191" service="urn:Kuiper-com:serviceId:dutchSmartMeterCounter" variable="Hours" value="22"/>
<state id="192" service="urn:Kuiper-com:serviceId:dutchSmartMeterCounter" variable="TimeStamp" value="Tue Feb 5 22:46:45 2013"/>
<state id="193" service="urn:Kuiper-com:serviceId:dutchSmartMeterCounter" variable="Low" value="234.318"/>
<state id="194" service="urn:Kuiper-com:serviceId:dutchSmartMeterCounter" variable="High" value="184.857"/>
<state id="195" service="urn:Kuiper-com:serviceId:dutchSmartMeterCounter" variable="Gas" value="424.247"/>
<state id="196" service="urn:Kuiper-com:serviceId:dutchSmartMeterCounter" variable="TodayLow_7" value="0"/>
<state id="197" service="urn:Kuiper-com:serviceId:dutchSmartMeterCounter" variable="TodayLow_6" value="0"/>
<state id="198" service="urn:Kuiper-com:serviceId:dutchSmartMeterCounter" variable="TodayLow_5" value="0"/>

[huib]

@screamhouse

is the value of the minutes at the dashboard changing / updating

pls advise
rgds
Huib

[Crismaison]

Yes!
Thanks for the support!

[huib]

@screamhouse
let me know if the information is updated after 00:00 and that information is moving downwards

at my end the updating of the month works ok and till now i did not yet had the update of 1 jan but the principe is the same

pls advise
rgds

Huib

[cmbeek]

@huib
No luck here. I get the same response of the device as Screemhouse but time keeps displaying zero's........
When opening the S_dutchSmartMeterCounter.xml  file I get the same error as mentioned a few posts ago.....

[huib]

@cmbeek
Did you update all 4 file as sent on 5 feb?
What do you get if you check the variable through the brouwser?
Pls advise
Rgds
Huib

[cmbeek]

@huib

See attachement for result of http://ip:3480/data_request?id=status&output_format=xml&DeviceNum=xx
Looks ok to me, but that doesn't mean much ;-)

[huib]

@cmbeek

be so kind to advice

1) did you update the files as sent on 5 feb
2) the smart meter it self is running good?
3) did you run the scene with the luup.reset1?

pls advise
rdgs
huib

[cmbeek]

@ Huib

1) did you update the files as sent on 5 feb --> Yes, but only after changing Id numbers
2) the smart meter it self is running good? --> Yes
3) did you run the scene with the luup.reset1? --> Yes

Strange isn't it?