Author Topic: EUROtronic SPIRIT Z-Wave Plus working with Vera (Plus)?  (Read 4537 times)

Offline Stripe

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: EUROtronic SPIRIT Z-Wave Plus working with Vera (Plus)?
« Reply #30 on: December 18, 2018, 09:29:06 am »


Also it would be nice to see the Valve Opening in %.

Would such info be useful? The same temp setting will bring different valve openings depending on various circumstances.

I just want see whether it is closed or not.

Offline podloucka

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Re: EUROtronic SPIRIT Z-Wave Plus working with Vera (Plus)?
« Reply #31 on: January 14, 2019, 07:42:26 am »
Any progress in integrating SPIRIT thermostat? I still see the error Can't Detect Device after some time.
Or did anyone solve this problem?
And I also need to see the opening level so I can simply switch the boiler on when the valve opens
Jan

Offline Odysee

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
Re: EUROtronic SPIRIT Z-Wave Plus working with Vera (Plus)?
« Reply #32 on: January 23, 2019, 04:27:25 am »
I also have the problem that temperature can be set on Vera and get a "transmit OK", but on the Spirit nothing happens.

Offline Tmorfus

  • Newbie
  • *
  • Posts: 9
  • Karma: +0/-0
Re: EUROtronic SPIRIT Z-Wave Plus working with Vera (Plus)?
« Reply #33 on: February 13, 2019, 05:19:14 am »
My Spirit's used with external T sensors (parameter 8 set to x80, temperature data converted and transmitted by Vera luup script).
Problem 1 is: Battery level not  shown in UI
Problem 2 is: Displayed "current temperature" - temperature from internal sensor.

Offline Stripe

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: EUROtronic SPIRIT Z-Wave Plus working with Vera (Plus)?
« Reply #34 on: February 13, 2019, 08:01:21 am »
My Spirit's used with external T sensors (parameter 8 set to x80, temperature data converted and transmitted by Vera luup script).
Problem 1 is: Battery level not  shown in UI
Problem 2 is: Displayed "current temperature" - temperature from internal sensor.

Hi,
i haven't the Problem nr.1 as you can see. Prob 2 i have it also, the internal Temperature is updated only sometimes in a long interval (It would be nice if the last value & read time ​​would be displayed). Can't detect Device is often displayed, but it works fine. Also i'm missing the percent of how much the Valve is open.

Offline Tmorfus

  • Newbie
  • *
  • Posts: 9
  • Karma: +0/-0
Re: EUROtronic SPIRIT Z-Wave Plus working with Vera (Plus)?
« Reply #35 on: February 13, 2019, 09:08:40 am »
Look at screen.
Gray - it a Remotec ZXT 120, actually it plugged.
Red - Spirit. on a battery.

Actual temperature of Spirit is wrong too, because it taked from Remotec (look at code sample)
Spirit actually opened and closed as well, as need, but INTERNAL temperature shown.
Code: [Select]
local function getLowByte16( value )
    local high_value = math.floor(value/256)
    high_value = high_value*256
    local low_value = value - high_value
    return low_value
end

local function getHighByte16( value )
    local high_value = math.floor(value/256)
    return high_value
end

local Nod = <ALTID OF SPIRIT>
local temp = luup.variable_get("urn:upnp-org:serviceId:TemperatureSensor1", "CurrentTemperature", DEVID OF RXT 120)
local ntemp=math.floor(temp*100)
local Dat = string.format("0x31 0x05 0x01 0x42 0x%02x 0x%02x",getHighByte16( ntemp ), getLowByte16( ntemp ))
luup.call_action('urn:micasaverde-com:serviceId:ZWaveNetwork1','SendData',{Node=Nod, Data=Dat},1)

Offline Odysee

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
Re: EUROtronic SPIRIT Z-Wave Plus working with Vera (Plus)?
« Reply #36 on: February 13, 2019, 09:39:27 am »
With me the battery level is also displayed. Measured temperature is updated every few minutes (could also be that the temperature does not change so often).

Offline Tmorfus

  • Newbie
  • *
  • Posts: 9
  • Karma: +0/-0
Re: EUROtronic SPIRIT Z-Wave Plus working with Vera (Plus)?
« Reply #37 on: February 13, 2019, 11:56:26 am »
Displayed self-measured temperature - is a problem, because Spirit set to use EXTERNAL temperature sensor.