We have moved at community.getvera.com

Author Topic: CA5100  (Read 1118 times)

Offline eli167

  • Jr. Member
  • **
  • Posts: 84
  • Karma: +0/-1
CA5100
« on: January 06, 2015, 11:14:41 am »
Happy new year everyone, question, I just wired up a CA5100 with a hot a neutral and ground, I added it to my Vera 3 I crated two scene one that turns a tight on  button 1 I used a trigger and one button 0 that turns the light off, I can not get then to work. the Ca5100 id ID 234 on the control tab it says "Scenes

Button #1-on=Hall light On, Button #0-on=Hall Off,
but under SCENES is says nothing listed any idea what I am doing wrong?



Automatically turn on/off the scene indicator lights
Activate the following scenes when the buttons are turned on:
 
Activate the following scenes when the buttons are turned off:

Offline kkl

  • Sr. Member
  • ****
  • Posts: 343
  • Karma: +1/-1
Re: CA5100
« Reply #1 on: January 06, 2015, 03:57:38 pm »

Offline eli167

  • Jr. Member
  • **
  • Posts: 84
  • Karma: +0/-1
Re: CA5100
« Reply #2 on: January 08, 2015, 11:58:46 am »
Great reply thanks

Offline Grwebster

  • Sr. Member
  • ****
  • Posts: 388
  • Karma: +7/-4
Re: CA5100
« Reply #3 on: January 10, 2015, 09:53:31 pm »
So created a scene to turn the light on, and another to turn it off?  Have you tried running the scenes manually to see if light goes on and off.  Once you get that working you can work with the triggers.


Sent from my iPad using Tapatalk

Offline eli167

  • Jr. Member
  • **
  • Posts: 84
  • Karma: +0/-1
Re: CA5100
« Reply #4 on: January 13, 2015, 04:17:11 pm »
To get it to work the scene  number needed to be 255 not 1 to turn something on, who would have  thought