We have moved at community.getvera.com

Author Topic: Jasco GE 45602 lamp module not turning off  (Read 1521 times)

Offline wayneone

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
Jasco GE 45602 lamp module not turning off
« on: April 30, 2013, 03:03:11 am »
Does anyone else have a problem with their Jasco dimmer plug Ver 3.0d where when you send the off command, it dims a bit, then turns on to full brightness? I'm using a vera light as the controller.

A dimmer switch plug that doesn't turn off is pretty much useless.

I received 4 Ver 3.0d  date code 1243 from amazon and 1 from Walmart.com same version/date code and they all exhibit this issue. The other 3 in my shipment from amazon were Ver 3.0c and do not have the issue. No issues with my original Ver 3.0a modules either.

Need to find a way of not receiving any with 3.0d on my next order. Maybe order the evolve ones.

Wayne

Offline oTi@

  • Community Beta
  • Master Member
  • ******
  • Posts: 4041
  • Karma: +32/-6
  • UI what ?!
Re: Jasco GE 45602 lamp module not turning off
« Reply #1 on: April 30, 2013, 07:06:27 am »
Just making sure you are using them with incandescent lighting, not LEDs?
Dezwaved at the moment...

Offline Dignan17

  • Sr. Member
  • ****
  • Posts: 256
  • Karma: +2/-0
Re: Jasco GE 45602 lamp module not turning off
« Reply #2 on: April 30, 2013, 11:12:17 am »
Is the 45602 different from the ZW3101? I have three ZW's controlling lamps with LED bulbs in them, and they work fine... But the behavior does sound a lot like a device that's incapable of controlling an LED bulb.

Offline wayneone

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
Re: Jasco GE 45602 lamp module not turning off
« Reply #3 on: April 30, 2013, 02:29:50 pm »
Issue occurs with A no name brand 60W incandescent as well as 72 Watt GE Reveal Halogen.

Offline underdog57

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Re: Jasco GE 45602 lamp module not turning off
« Reply #4 on: September 15, 2013, 11:34:34 pm »
Both of my new modules exhibited this behavior.  I was pretty upset about it.  I power-cycled the devices and they're working well now. 
We'll see what happens.