We have moved at community.getvera.com

Author Topic: Leviton VRCS4-MRZ vs VRCZ4-MRZ (scene vs zone)  (Read 9959 times)

Offline PurdueGuy

  • Hero Member
  • *****
  • Posts: 1169
  • Karma: +21/-0
Re: Leviton VRCS4-MRZ vs VRCZ4-MRZ (scene vs zone)
« Reply #15 on: May 24, 2014, 11:52:40 pm »
I had asked this question in another thread, but it probably belongs here.

A couple posts above, someone said the scene controller local load control does not dim. Does the zone controller allow dimming or does it behave the same?
Neither support dimming.  Both are On/Off only.

And is there way to control the LED light colors through Vera?
http://forum.micasaverde.com/index.php/topic,9923.msg66963.html#msg66963
Vera3, Leviton, Intermatic, SQ Blaster, HomeWave, DSC 1832, Insteon/Altsteon

Offline donkeykong

  • Newbie
  • *
  • Posts: 13
  • Karma: +0/-0
Re: Leviton VRCS4-MRZ vs VRCZ4-MRZ (scene vs zone)
« Reply #16 on: May 25, 2014, 03:41:11 am »
Thanks!

Offline donkeykong

  • Newbie
  • *
  • Posts: 13
  • Karma: +0/-0
Re: Leviton VRCS4-MRZ vs VRCZ4-MRZ (scene vs zone)
« Reply #17 on: May 27, 2014, 07:11:07 pm »
And is there way to control the LED light colors through Vera?
http://forum.micasaverde.com/index.php/topic,9923.msg66963.html#msg66963

I tried to add the line of code in Lua to set the indicator to RED when triggering a scene, but it didn't work. I have the VRCS4, do you know if it only works with the zone controller? Also, your device names (XX,YY,ZZ) are simply what you renamed the controllers to?

Offline PurdueGuy

  • Hero Member
  • *****
  • Posts: 1169
  • Karma: +21/-0
Re: Leviton VRCS4-MRZ vs VRCZ4-MRZ (scene vs zone)
« Reply #18 on: May 27, 2014, 07:29:49 pm »
I tried to add the line of code in Lua to set the indicator to RED when triggering a scene, but it didn't work. I have the VRCS4, do you know if it only works with the zone controller? Also, your device names (XX,YY,ZZ) are simply what you renamed the controllers to?

XX, YY, and ZZ refer to the device ID of the controller.  Look at the "Settings" tab, it is labeled "Device #" (in my attached picture, it is device #167, so to set the upper-most button to red, my luup code would be:
Code: [Select]
luup.call_action("urn:micasaverde-com:serviceId:SceneControllerLED1","SetLight",{newValue="2",Indicator="1"}, 167)
Vera3, Leviton, Intermatic, SQ Blaster, HomeWave, DSC 1832, Insteon/Altsteon

Offline donkeykong

  • Newbie
  • *
  • Posts: 13
  • Karma: +0/-0
Re: Leviton VRCS4-MRZ vs VRCZ4-MRZ (scene vs zone)
« Reply #19 on: May 28, 2014, 04:12:42 am »
I tried to add the line of code in Lua to set the indicator to RED when triggering a scene, but it didn't work. I have the VRCS4, do you know if it only works with the zone controller? Also, your device names (XX,YY,ZZ) are simply what you renamed the controllers to?

XX, YY, and ZZ refer to the device ID of the controller.  Look at the "Settings" tab, it is labeled "Device #" (in my attached picture, it is device #167, so to set the upper-most button to red, my luup code would be:
Code: [Select]
luup.call_action("urn:micasaverde-com:serviceId:SceneControllerLED1","SetLight",{newValue="2",Indicator="1"}, 167)

Ah I see, it's the device # not the name. will try again!