We have moved at community.getvera.com

Author Topic: AutHomationHD 3.0  (Read 46497 times)

Offline Freddan101

  • Sr. Member
  • ****
  • Posts: 347
  • Karma: +12/-2
Re: AutHomationHD 3.0
« Reply #60 on: October 03, 2013, 04:45:40 pm »
like the voice feature. Any plans on releasing on ios for the iphone? :D
+1

Just tried this app on my wife's job Android phone and it's far better than anything else.

Offline RexBeckett

  • Beta Testers
  • Master Member
  • *****
  • Posts: 3891
  • Karma: +483/-13
Re: AutHomationHD 3.0
« Reply #61 on: October 04, 2013, 05:39:42 pm »
I just installed this on my new Nexus 7 and it is excellent. My compliments to the chef.  8)  I feel a strong desire to buy a bunch of tablets and replace my existing Vera remotes.  ;D
 

Offline Da_JoJo

  • Hero Member
  • *****
  • Posts: 1380
  • Karma: +16/-78
  • If something aint work, we can allways try n make
Re: AutHomationHD 3.0
« Reply #62 on: October 07, 2013, 07:35:02 pm »
presets of foscam HD cam are not working and the direction controls are reversed. i.e. cam to the left goes to the right and right goes left.
Vera lite (1.5.622), 2x an-158/2, dead usb pl2302 rs-232, 2x greenwave 6 port, 4x Fibaro FGD211 v1.6, FGBS001, few FGS - 221, etc. AuthomationHD 3 for android :-)
Dutch & German translator http://wiki.micasaverde.com/index.php/Special:AllPages http://support.micasaverde.com http://domotica-shop.nl

Offline garrettwp

  • Moderator
  • Master Member
  • *****
  • Posts: 6371
  • Karma: +227/-128
  • Vera 3, Lite, ISY994
Re: AutHomationHD 3.0
« Reply #63 on: October 08, 2013, 12:28:15 am »
presets of foscam HD cam are not working and the direction controls are reversed. i.e. cam to the left goes to the right and right goes left.

You need to look at the camera implementation file. The controls are configured correctly in the app and they reference the correct services. So I would double check that the implementation file is configured correctly.

- Garrett

Offline Otje

  • Full Member
  • ***
  • Posts: 214
  • Karma: +6/-1
Re: AutHomationHD 3.0
« Reply #64 on: October 08, 2013, 04:18:52 pm »
Hi Garrett

i have a question which i posted earlier but not sure if you can help.
I use your app a lot and it is great.
I have integrated Ip cameras in VERA and when I view the cams trough the vera webinterface i can configure for VERA to switch on lights when the CAM is viewed, this will help for instance when viewing the camera in the evening.

However, this function does not work when i view the camera through your app. it does not switch the light units.
I am not sure if this is a easy thing to implement or not?

thanks in advance for your reply.
VERA Plus, VERA 3 Lite , couple of PIR's, several switch units, wall mounted tablet, Sonos integration with TTS, Temperature sensors, Imperihome, Zwave LED bulbs

Offline Da_JoJo

  • Hero Member
  • *****
  • Posts: 1380
  • Karma: +16/-78
  • If something aint work, we can allways try n make
Re: AutHomationHD 3.0
« Reply #65 on: October 30, 2013, 01:00:40 am »
camera on vera UI works ok.. press right goes right. on the authomation goes left. also the danfoss thermostate pressing up makes it go down. using ver 3.1.3.5
Vera lite (1.5.622), 2x an-158/2, dead usb pl2302 rs-232, 2x greenwave 6 port, 4x Fibaro FGD211 v1.6, FGBS001, few FGS - 221, etc. AuthomationHD 3 for android :-)
Dutch & German translator http://wiki.micasaverde.com/index.php/Special:AllPages http://support.micasaverde.com http://domotica-shop.nl

Offline garrettwp

  • Moderator
  • Master Member
  • *****
  • Posts: 6371
  • Karma: +227/-128
  • Vera 3, Lite, ISY994
Re: AutHomationHD 3.0
« Reply #66 on: October 30, 2013, 01:09:25 am »
Hi Garrett

i have a question which i posted earlier but not sure if you can help.
I use your app a lot and it is great.
I have integrated Ip cameras in VERA and when I view the cams trough the vera webinterface i can configure for VERA to switch on lights when the CAM is viewed, this will help for instance when viewing the camera in the evening.

However, this function does not work when i view the camera through your app. it does not switch the light units.
I am not sure if this is a easy thing to implement or not?

thanks in advance for your reply.

I have added this in the next release which an alpha build for testing will be available soon.

- Garrett

Offline garrettwp

  • Moderator
  • Master Member
  • *****
  • Posts: 6371
  • Karma: +227/-128
  • Vera 3, Lite, ISY994
Re: AutHomationHD 3.0
« Reply #67 on: October 30, 2013, 01:11:00 am »
camera on vera UI works ok.. press right goes right. on the authomation goes left. also the danfoss thermostate pressing up makes it go down. using ver 3.1.3.5

The controls are pointing to the correct service actions. Is your foscam implementation have the controls reversed for any reason? As for the danfoss what type of thermostat is it? I may have fixed this in the next release. Is this for a heater device or full thermostat?

- Garrett

Offline Otje

  • Full Member
  • ***
  • Posts: 214
  • Karma: +6/-1
Re: AutHomationHD 3.0
« Reply #68 on: October 30, 2013, 02:42:53 am »
Hi Garrett

i have a question which i posted earlier but not sure if you can help.
I use your app a lot and it is great.
I have integrated Ip cameras in VERA and when I view the cams trough the vera webinterface i can configure for VERA to switch on lights when the CAM is viewed, this will help for instance when viewing the camera in the evening.

However, this function does not work when i view the camera through your app. it does not switch the light units.
I am not sure if this is a easy thing to implement or not?

thanks in advance for your reply.

I have added this in the next release which an alpha build for testing will be available soon.

- Garrett

Sounds great!  thanks Garrett
VERA Plus, VERA 3 Lite , couple of PIR's, several switch units, wall mounted tablet, Sonos integration with TTS, Temperature sensors, Imperihome, Zwave LED bulbs

Offline Da_JoJo

  • Hero Member
  • *****
  • Posts: 1380
  • Karma: +16/-78
  • If something aint work, we can allways try n make
Re: AutHomationHD 3.0
« Reply #69 on: October 30, 2013, 09:13:31 pm »
i use the implementationfile for the foscam98HD.. the one i made. perhaps its reversed in that allready.. i'll have a look.
the danfoss is the small device with heater control , its a thermostate valve.
Vera lite (1.5.622), 2x an-158/2, dead usb pl2302 rs-232, 2x greenwave 6 port, 4x Fibaro FGD211 v1.6, FGBS001, few FGS - 221, etc. AuthomationHD 3 for android :-)
Dutch & German translator http://wiki.micasaverde.com/index.php/Special:AllPages http://support.micasaverde.com http://domotica-shop.nl

Offline gijs

  • Sr. Newbie
  • *
  • Posts: 20
  • Karma: +3/-0
Re: AutHomationHD 3.0
« Reply #70 on: December 10, 2013, 08:17:18 am »
Hi Garret,

Would it be possible to include this plugin in your app:  http://apps.mios.com/plugin.php?id=3506
It would be nice to set a temperature via your app.

Offline garrettwp

  • Moderator
  • Master Member
  • *****
  • Posts: 6371
  • Karma: +227/-128
  • Vera 3, Lite, ISY994
Re: AutHomationHD 3.0
« Reply #71 on: December 10, 2013, 10:39:06 am »
I'll have a look and at it to my list. I can not tell you if and when it will get added.

- Garrett

Offline RonLin

  • Jr. Member
  • **
  • Posts: 99
  • Karma: +1/-3
Re: AutHomationHD 3.0
« Reply #72 on: December 18, 2013, 09:06:22 pm »
Can you add a widget shortcut for Arming in Away mode? Also this plugin doesn't work when I try to use it from your app: http://rts-services.com/Vera/Plugin/GarageDoor/

Offline rabeatz

  • Sr. Newbie
  • *
  • Posts: 24
  • Karma: +0/-0
Re: AutHomationHD 3.0
« Reply #73 on: December 27, 2013, 02:47:10 am »
Awesome app.. Great interface!! Thanks so much

A side note - Netatmo sensors aren't displaying any data in the app for the following sensors - C02, Noise level, Pressure.

C02 should display the number in the "CurrentLevel" field, followed by PPM (found in the UnitsDisplay field). Same with the Noise level and pressure fields. I hope that helps if you don't have a Netatmo.

I've hidden them for now..

P.S. This app doesn't have ads, where do I go to send you my money for your hard work?


Offline niharmehta

  • Sr. Member
  • ****
  • Posts: 377
  • Karma: +17/-0
Re: AutHomationHD 3.0
« Reply #74 on: January 13, 2014, 12:25:02 am »
Any chance of supporting Vacation Ghost plugin ? Basically to arm/disarm and check ghosts status ?
2x VeraLite; 2xTrane Tstats; 45 x Switches/Dimmers/Appliance Modules; 4x Everspring Water Sensors; DSC Integration; 2 x Zwave Door Locks; 1x Ted5K; 1x Rainforest Eagle; Onkyo AVR; 6x Squeezebox;