We have moved at community.getvera.com

Author Topic: 1.5.662 Not available  (Read 2650 times)

Offline mike5906

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
1.5.662 Not available
« on: May 15, 2013, 12:44:50 pm »
I am unable to get my Vera to see the new firmware as available for update.    Is the new firmware released or not?

Offline garrettwp

  • Master Member
  • *******
  • Posts: 6371
  • Karma: +227/-128
  • Vera 3, Lite, ISY994
Re: 1.5.662 Not available
« Reply #1 on: May 15, 2013, 01:04:08 pm »
How are you trying to get to the new firmware? Have you seen this post?

http://forum.micasaverde.com/index.php/topic,13956.0.html

- Garrett

Offline mike5906

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: 1.5.662 Not available
« Reply #2 on: May 17, 2013, 05:22:17 pm »
Yes, and I used the link.  It says: You are trying to upgrade to an outdated beta version which is no longer available.

Offline Brientim

  • Sr. Hero Member
  • ******
  • Posts: 2497
  • Karma: +78/-7
1.5.662 Not available
« Reply #3 on: May 17, 2013, 05:25:05 pm »
Go to Cpui5.mios.com/firmware

This was detailed in the thread @Garrett pointed you to - see
http://forum.micasaverde.com/index.php?topic=13956.60
« Last Edit: May 17, 2013, 05:26:55 pm by Brientim »

Offline rpearson

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Yale door lock, and firmware
« Reply #4 on: June 22, 2013, 10:29:30 pm »
I have been unable to properly configure one of my two Yale door locks. The one farther away from the Vera 3 is configured perfectly, but the one in the same room with the Vera, about 8 feet away, will not configure. Most things actually work -- I can set pin codes, I can open and close the lock -- but Vera always reports that the lock is open.

The web-based dashboard reports that I have firmware version 1.5.408, and I have read that that version has some problems with Yale door locks. But the dashboard says that 1.5.408 is the current version, even though apparently there is a new firmware version. I tried going through the web firmware upgrade portal, but it said that it could not find a vera on my network.

Any advice on whether I should upgrade the firmware, and how?

Rodney Pearson
rodney.pearson@msstate.edu