We have moved at community.getvera.com

Author Topic: Firmware 1.0.320 & Cameras  (Read 4812 times)

Offline pjgolian

  • Full Member
  • ***
  • Posts: 155
  • Karma: +0/-0
Firmware 1.0.320 & Cameras
« on: November 25, 2008, 09:26:00 pm »
View camera is still not working with this firmware.  It initially displays a blank box with a red dot in it.  After a few seconds it just displays a blank box.

Offline Mark H.

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 324
  • Karma: +0/-0
Re: Firmware 1.0.320 & Cameras
« Reply #1 on: November 25, 2008, 10:42:31 pm »
Sorry to hear its not working yet.

Have you checked the obvious settings like setting a static IP for the camera? How about the proper URL? Have you had any success with another camera?

What is the Panasonic model number?

Go over your settings with a fine toothed comb.
Vera 2
Firmware: 1.5.101 Zwave: 3.20

Offline pjgolian

  • Full Member
  • ***
  • Posts: 155
  • Karma: +0/-0
Re: Firmware 1.0.320 & Cameras
« Reply #2 on: November 25, 2008, 10:57:24 pm »
Cameras were working fine with the 292 firmware.  They stop working with 310 and now 320.  Both are Panasonic BL-C131A.

Offline micasaverde

  • Hero Member
  • *****
  • Posts: 1666
  • Karma: +15/-1
Re: Firmware 1.0.320 & Cameras
« Reply #3 on: November 25, 2008, 11:23:48 pm »
pjgolian, I'm using the BL-C131A with 320.  So there's something else going on.  Can I take a look?  If you don't mind letting me in and having nothing  in front of the cameras you don't want seen, you can enable tech support access (Advanced, Tech Support) and send me a private message with the access code.  But doing it tomorrow because I'll be leaving soon and the back door is only open for 5 hours.

Offline pjgolian

  • Full Member
  • ***
  • Posts: 155
  • Karma: +0/-0
Re: Firmware 1.0.320 & Cameras
« Reply #4 on: November 25, 2008, 11:28:29 pm »
pjgolian, I'm using the BL-C131A with 320.  So there's something else going on.  Can I take a look?  If you don't mind letting me in and having nothing  in front of the cameras you don't want seen, you can enable tech support access (Advanced, Tech Support) and send me a private message with the access code.  But doing it tomorrow because I'll be leaving soon and the back door is only open for 5 hours.

What time tomorrow is good for you?  I'm pretty booked with meetings at work until 2pm EST.  I then have an appointment from 4-6pm.


Offline micasaverde

  • Hero Member
  • *****
  • Posts: 1666
  • Karma: +15/-1
Re: Firmware 1.0.320 & Cameras
« Reply #5 on: November 26, 2008, 11:35:15 am »
I'm at my computer all day today until about 7pm PST, except for the odd break.  You can try me on IM (micasaverde.com, support) or (866) 966-casa ext 803.  That goes to my cell phone if I'm not at my desk so I'll always answer.