Author Topic: Fibaro Motion Sensor  (Read 64118 times)

Offline abdiel2000

  • Newbie
  • *
  • Posts: 15
  • Karma: +0/-0
Re: Fibaro Motion Sensor
« Reply #15 on: April 18, 2014, 05:19:39 pm »
That's great news, racarter! :)

Please let us know how well it works for you. Is there any delay in its reporting?

(And maybe include some pictures of the Eye of Sauron effect they're going for. That does give me some pause. Although, my inner geek secretly loves it... :) )

Offline mpg

  • Newbie
  • *
  • Posts: 14
  • Karma: +0/-1
Re: Fibaro Motion Sensor
« Reply #16 on: April 19, 2014, 12:39:09 am »
Racarter, can you post the address?

I want to have motion sensor running, too  :-)

Offline racarter

  • Hero Member
  • *****
  • Posts: 514
  • Karma: +12/-3
Re: Fibaro Motion Sensor
« Reply #17 on: April 19, 2014, 02:41:32 am »
I'm not sure of the etiquette regarding publication of beta firmware links...
Indigo, Vera Edge/Datamine, Everspring and TKBHOME socket switches, SM103 door detectors, Homepro ZRP210 appliance modules, Fibaro relay switches, EZMotion 3 in 1 sensors, Heatmiser thermostats, Hikvision DVR/CCTV, Sonos, Texecom, Diax motorised deadlock.

Offline parkerc

  • Sr. Hero Member
  • ******
  • Posts: 2364
  • Karma: +33/-45
  • Life Moves Pretty Fast....
    • Node Central
Re: Fibaro Motion Sensor
« Reply #18 on: April 19, 2014, 03:12:16 am »
I'm not sure of the etiquette regarding publication of beta firmware links...

I would suggest it's best for MCV to share such links..

Offline racarter

  • Hero Member
  • *****
  • Posts: 514
  • Karma: +12/-3
Re: Fibaro Motion Sensor
« Reply #19 on: April 19, 2014, 03:13:24 am »
That's what I was implying...
Indigo, Vera Edge/Datamine, Everspring and TKBHOME socket switches, SM103 door detectors, Homepro ZRP210 appliance modules, Fibaro relay switches, EZMotion 3 in 1 sensors, Heatmiser thermostats, Hikvision DVR/CCTV, Sonos, Texecom, Diax motorised deadlock.

Offline Freddan101

  • Sr. Member
  • ****
  • Posts: 347
  • Karma: +12/-2
Re: Fibaro Motion Sensor
« Reply #20 on: April 20, 2014, 01:51:07 am »
How high does the lux level go? Is it both for indoor/outdoor use?

Offline racarter

  • Hero Member
  • *****
  • Posts: 514
  • Karma: +12/-3
Re: Fibaro Motion Sensor
« Reply #21 on: April 20, 2014, 06:06:50 am »
Light level is currently reading 306 in the kitchen on a brightish day with the sensor at right-angles to the window.  I don't think the device is suitable for outdoor use; the joint on the case doesn't look at all weatherproof.
Indigo, Vera Edge/Datamine, Everspring and TKBHOME socket switches, SM103 door detectors, Homepro ZRP210 appliance modules, Fibaro relay switches, EZMotion 3 in 1 sensors, Heatmiser thermostats, Hikvision DVR/CCTV, Sonos, Texecom, Diax motorised deadlock.

Offline Da_JoJo

  • Hero Member
  • *****
  • Posts: 1382
  • Karma: +16/-78
  • If something aint work, we can allways try n make
    • House Of Yu
Re: Fibaro Motion Sensor
« Reply #22 on: April 20, 2014, 09:05:30 am »
is left-to-right  and right-to-left detection for you ? i have this motion-sensor but i didn't get to include it or test it yet. u have the new firmware of 1.5 or 1.6 ? i run 1.6 at the moment. getting ui7 soon. it supposed to work on ui7. its for indoor use only, it lacks waterproof casing and rubbers.
Vera lite (1.5.622), 2x an-158/2, dead usb pl2302 rs-232, 2x greenwave 6 port, 4x Fibaro FGD211 v1.6, FGBS001, few FGS - 221, etc. AuthomationHD 3 for android :-)
Dutch & German translator http://wiki.micasaverde.com/index.php/Special:AllPages http://support.micasaverde.com http://domotica-shop.nl

Offline mzpost

  • Sr. Member
  • ****
  • Posts: 251
  • Karma: +2/-1
Re: Fibaro Motion Sensor
« Reply #23 on: April 20, 2014, 09:06:59 am »
I've been asked to allow remote access so will see what happens next. Sounds like a fix is on the way which is good as I'm keen to get this working and see what it can do.

The "eye" Is not as it looks on the box. That night be too freaky its just led notification looking much more normal than the illustrations suggest....thankfully.

Offline Da_JoJo

  • Hero Member
  • *****
  • Posts: 1382
  • Karma: +16/-78
  • If something aint work, we can allways try n make
    • House Of Yu
Re: Fibaro Motion Sensor
« Reply #24 on: April 20, 2014, 09:08:59 am »
yeah i was hoping for some sort of night-rider look but alas :D
Vera lite (1.5.622), 2x an-158/2, dead usb pl2302 rs-232, 2x greenwave 6 port, 4x Fibaro FGD211 v1.6, FGBS001, few FGS - 221, etc. AuthomationHD 3 for android :-)
Dutch & German translator http://wiki.micasaverde.com/index.php/Special:AllPages http://support.micasaverde.com http://domotica-shop.nl

Offline Sender

  • Hero Member
  • *****
  • Posts: 760
  • Karma: +532/-441
  • Sr. manager of my Vera
Re: Fibaro Motion Sensor
« Reply #25 on: April 22, 2014, 03:49:28 am »
Can you tell me the exact version number of the beta firmware? Is it by conicidense the same one as the beta for the fibaro smoke sensor?
Good firmware is more important than good karma. (and this costed me lots of Karma)

Offline mpg

  • Newbie
  • *
  • Posts: 14
  • Karma: +0/-1
Re: Fibaro Motion Sensor
« Reply #26 on: April 22, 2014, 11:03:43 am »
MCV just sent a link to me.
I did not upgrade yet.
It seems to be 1.5.672 beta.

Offline racarter

  • Hero Member
  • *****
  • Posts: 514
  • Karma: +12/-3
Re: Fibaro Motion Sensor
« Reply #27 on: April 22, 2014, 02:09:08 pm »
I confirm 1.5.672
Indigo, Vera Edge/Datamine, Everspring and TKBHOME socket switches, SM103 door detectors, Homepro ZRP210 appliance modules, Fibaro relay switches, EZMotion 3 in 1 sensors, Heatmiser thermostats, Hikvision DVR/CCTV, Sonos, Texecom, Diax motorised deadlock.

Offline NomisR

  • Sr. Newbie
  • *
  • Posts: 41
  • Karma: +0/-0
Re: Fibaro Motion Sensor
« Reply #28 on: April 22, 2014, 02:38:53 pm »
I've been asked to allow remote access so will see what happens next. Sounds like a fix is on the way which is good as I'm keen to get this working and see what it can do.

The "eye" Is not as it looks on the box. That night be too freaky its just led notification looking much more normal than the illustrations suggest....thankfully.

Any pictures?

Offline Sender

  • Hero Member
  • *****
  • Posts: 760
  • Karma: +532/-441
  • Sr. manager of my Vera
Re: Fibaro Motion Sensor
« Reply #29 on: April 22, 2014, 02:55:26 pm »
I confirm that I have that beta version for fibaro smoke sensor.  I will order one soon.
Good firmware is more important than good karma. (and this costed me lots of Karma)