Author Topic: MySensors 1.4b1  (Read 6752 times)

Offline integlikewhoa

  • Master Member
  • *******
  • Posts: 5624
  • Karma: +155/-376
Re: MySensors 1.4b1
« Reply #15 on: October 27, 2015, 05:44:32 pm »
Hi,

It should go on line 709. 710 is the last end statement of the startup function.

Cheers Rene.

What is the proper program to edit the lua file?

Offline integlikewhoa

  • Master Member
  • *******
  • Posts: 5624
  • Karma: +155/-376
Re: MySensors 1.4b1
« Reply #16 on: October 27, 2015, 05:51:00 pm »
Does this seem about right?

EDIT it works now. All green happy houses on the UI. Thanks guys!
« Last Edit: October 27, 2015, 05:53:04 pm by integlikewhoa »

Offline reneboer

  • Hero Member
  • *****
  • Posts: 1282
  • Karma: +72/-30
Re: MySensors 1.4b1
« Reply #17 on: October 28, 2015, 09:55:18 am »
Nice!
2xVeraLite, VeraEdge, openLuup, ALTUI, 20 switches, 10 dimmers, 20 sensors, 10 scene controllers, 1 Harmony Hub, many plug-ins. Not enough time.

Offline integlikewhoa

  • Master Member
  • *******
  • Posts: 5624
  • Karma: +155/-376
Re: MySensors 1.4b1
« Reply #18 on: October 29, 2015, 12:59:27 am »
Since it all seems to be working incase anyone needs the modified file here you go.

Just upload this to replace your old one.

Offline 4Crawler

  • Jr. Member
  • **
  • Posts: 73
  • Karma: +2/-0
Re: MySensors 1.4b1
« Reply #19 on: March 12, 2016, 01:21:55 am »
Is this same 2-line fix required on the 1.5/UI7 library?

UPDATE 1: Appears not to be needed, used the unmodified file and device seems to load and operate the same.

I have things somewhat working on a VeraLite with serial gateway on an FTDI-nano.  I can get the device created and can include another sensor (Humidity) and all seems fine for a few minutes, updates post, etc.  Then the updates seem to cease on the Vera screen, although from what I can tell the sensor and gateway seem to be running fine.  If I reload the LUUP engine on the Vera, the gateway and sensor will start updating again for a few minutes then stop.  And I have left the gateway and sensor up and running off my PC and I can see the gateway is reporting updates every minute from the sensor on the IDE Serial Monitor for as long as I leave it connected.

UPDATE 2: At the advice of Hek on the MySensors forum, I added a powered USB hub off the VeraLite and that seems to have solved the updating problem, have now run over 24 hrs. with regular updates coming in.

Also, I tried to add the 3 blinking LEDs to either the serial gateway or the humidity sensor and I can't seem to get them to blink.  I can make the LEDs blink on pins 4,5,6 with a modified Blink sketch so I know they are wired properly.  I've tried the normal and inverse blink options but I get no LED operation.
« Last Edit: March 14, 2016, 12:35:57 am by 4Crawler »