We have moved at community.getvera.com

Author Topic: DataYours Beta Test - VERSION 2  (Read 129602 times)

Offline d55m14

  • Sr. Member
  • ****
  • Posts: 449
  • Karma: +8/-1
Re: DataYours Beta Test - VERSION 2
« Reply #420 on: February 13, 2015, 03:35:59 pm »
Yup, expected that.

This should fix that message, but you should already see your device variables now.

Change the DAEMONS variable to "Watcher"
akbooer Great !!

The error msg is disappeared and a child device (Watcher) was created...

Then I've defined Cache and I left /nas/ as local destination.

The child cache has been created.

But now when I click on the Dashboard link present in the main device I get a blank screen.

I've to actived something else ?

Tnks

donato

Offline akbooer

  • Moderator
  • Master Member
  • *****
  • Posts: 6387
  • Karma: +292/-70
  • "Less is more"
Re: DataYours Beta Test - VERSION 2
« Reply #421 on: February 13, 2015, 04:01:55 pm »
Then I've defined Cache and I left /nas/ as local destination.
You're way ahead of me!

Quote
But now when I click on the Dashboard link present in the main device I get a blank screen.
I've to actived something else ?

Yes, there's two more daemons I've not yet posted:
  • DataGraph - this is the engine that does the graphics
  • DataDash - this is the dashboard interface
At this stage, you could simply route the data to your other machine and start plotting stuff from there, but I think you didn't want to do that.  Also, if you leave the directory as /nas you will have to physically create that root directory on your Vera (mkdir) since DataYours will not do it for you.

I'll post the missing daemons shortly.
3x Vera Lite-UI5/Edge-UI7, 25x Fibaro, 23x TKB, 9x MiniMote, 2x NorthQ Power, 2x Netatmo, 1x Foscam FI9831P, 9x Philips Hue,
Razberry, MySensors Arduino, HomeWave, AltUI, AltHue, DataYours, Grafana, openLuup, ZWay, ZeroBrane Studio.

Offline akbooer

  • Moderator
  • Master Member
  • *****
  • Posts: 6387
  • Karma: +292/-70
  • "Less is more"
Re: DataYours Beta Test - VERSION 3
« Reply #422 on: February 13, 2015, 04:05:55 pm »
Here's DataGraph, install is for as the two previous daemons.
3x Vera Lite-UI5/Edge-UI7, 25x Fibaro, 23x TKB, 9x MiniMote, 2x NorthQ Power, 2x Netatmo, 1x Foscam FI9831P, 9x Philips Hue,
Razberry, MySensors Arduino, HomeWave, AltUI, AltHue, DataYours, Grafana, openLuup, ZWay, ZeroBrane Studio.

Offline akbooer

  • Moderator
  • Master Member
  • *****
  • Posts: 6387
  • Karma: +292/-70
  • "Less is more"
Re: DataYours Beta Test - VERSION 3
« Reply #423 on: February 13, 2015, 04:07:30 pm »
And DataDash...
« Last Edit: February 13, 2015, 04:10:30 pm by akbooer »
3x Vera Lite-UI5/Edge-UI7, 25x Fibaro, 23x TKB, 9x MiniMote, 2x NorthQ Power, 2x Netatmo, 1x Foscam FI9831P, 9x Philips Hue,
Razberry, MySensors Arduino, HomeWave, AltUI, AltHue, DataYours, Grafana, openLuup, ZWay, ZeroBrane Studio.

Offline akbooer

  • Moderator
  • Master Member
  • *****
  • Posts: 6387
  • Karma: +292/-70
  • "Less is more"
Re: DataYours Beta Test - VERSION 2
« Reply #424 on: February 13, 2015, 04:24:59 pm »
But now when I click on the Dashboard link present in the main device I get a blank screen.

This link will not currently work.  Instead, to get to the dashboard, use:

Code: [Select]
http://<YourVeraIP>:3480/data_request?id=lr_dashboard2&page=home

...you should be on familiar territory now.
3x Vera Lite-UI5/Edge-UI7, 25x Fibaro, 23x TKB, 9x MiniMote, 2x NorthQ Power, 2x Netatmo, 1x Foscam FI9831P, 9x Philips Hue,
Razberry, MySensors Arduino, HomeWave, AltUI, AltHue, DataYours, Grafana, openLuup, ZWay, ZeroBrane Studio.

Offline d55m14

  • Sr. Member
  • ****
  • Posts: 449
  • Karma: +8/-1
Re: DataYours Beta Test - VERSION 2
« Reply #425 on: February 13, 2015, 04:27:16 pm »
Hi akbooer,

tnks for your support and excuse me for the question . Where do I have to define the /nas directory ? At root level of Vera ?

tnks

donato

Offline akbooer

  • Moderator
  • Master Member
  • *****
  • Posts: 6387
  • Karma: +292/-70
  • "Less is more"
Re: DataYours Beta Test - VERSION 2
« Reply #426 on: February 13, 2015, 04:29:23 pm »
Yes, if that's where you want your storage.  However, having got USB going (?) then you might want to redirect the LOCAL_DATA_DIR to a directory there.

Note that several of the daemons need this configuration variable individually changed.
3x Vera Lite-UI5/Edge-UI7, 25x Fibaro, 23x TKB, 9x MiniMote, 2x NorthQ Power, 2x Netatmo, 1x Foscam FI9831P, 9x Philips Hue,
Razberry, MySensors Arduino, HomeWave, AltUI, AltHue, DataYours, Grafana, openLuup, ZWay, ZeroBrane Studio.

Offline d55m14

  • Sr. Member
  • ****
  • Posts: 449
  • Karma: +8/-1
Re: DataYours Beta Test - VERSION 2
« Reply #427 on: February 13, 2015, 04:34:23 pm »
Yes, if that's where you want your storage.  However, having got USB going (?) then you might want to redirect the LOCAL_DATA_DIR to a directory there.

Note that several of the daemons need this configuration variable individually changed.

Yes the USB seems to work but at the moment I prefer to use the local storage so I don't introduce a potential problem.

When I use the link you suggested in the previous post  now I get the "no handler" msg

tnks donato

Offline akbooer

  • Moderator
  • Master Member
  • *****
  • Posts: 6387
  • Karma: +292/-70
  • "Less is more"
Re: DataYours Beta Test - VERSION 2
« Reply #428 on: February 13, 2015, 04:49:28 pm »
When I use the link you suggested in the previous post  now I get the "no handler" msg

Have you added Graph and Dash to the DAEMONS list, as you did for Cache? it should look something like this now:

Code: [Select]
Watcher, Cache, Graph, Dash
3x Vera Lite-UI5/Edge-UI7, 25x Fibaro, 23x TKB, 9x MiniMote, 2x NorthQ Power, 2x Netatmo, 1x Foscam FI9831P, 9x Philips Hue,
Razberry, MySensors Arduino, HomeWave, AltUI, AltHue, DataYours, Grafana, openLuup, ZWay, ZeroBrane Studio.

Offline d55m14

  • Sr. Member
  • ****
  • Posts: 449
  • Karma: +8/-1
Re: DataYours Beta Test - VERSION 2
« Reply #429 on: February 13, 2015, 04:53:54 pm »
When I use the link you suggested in the previous post  now I get the "no handler" msg

Have you added Graph and Dash to the DAEMONS list, as you did for Cache? it should look something like this now:

Code: [Select]
Watcher, Cache, Graph, Dash

NO !! It was clear ...sorry...

Offline d55m14

  • Sr. Member
  • ****
  • Posts: 449
  • Karma: +8/-1
Re: DataYours Beta Test - VERSION 2
« Reply #430 on: February 13, 2015, 05:01:46 pm »
Hi akbooer,


attached the result ....  :)

wonderful.... you're great ..

donato

Offline akbooer

  • Moderator
  • Master Member
  • *****
  • Posts: 6387
  • Karma: +292/-70
  • "Less is more"
Re: DataYours Beta Test - VERSION 2
« Reply #431 on: February 13, 2015, 05:10:21 pm »
Really excellent news - I'm sorry the road was a bit longer and rougher than I thought.  But you did volunteer  Now get some data logged!

Here's what the devices display looks like when you link 4 Veras together (205 total devices!).  Of course, you can click down through the machines and categories to make things more visible.  Let me know when you want to connect your machines together in this way!

I'm sure this isn't the last challenge, but thanks for help with beta testing of this UI7 version before it goes into the App Store.  Do let us all know how it goes.
3x Vera Lite-UI5/Edge-UI7, 25x Fibaro, 23x TKB, 9x MiniMote, 2x NorthQ Power, 2x Netatmo, 1x Foscam FI9831P, 9x Philips Hue,
Razberry, MySensors Arduino, HomeWave, AltUI, AltHue, DataYours, Grafana, openLuup, ZWay, ZeroBrane Studio.

Offline d55m14

  • Sr. Member
  • ****
  • Posts: 449
  • Karma: +8/-1
Re: DataYours Beta Test - VERSION 2
« Reply #432 on: February 13, 2015, 05:17:23 pm »
Really excellent news - I'm sorry the road was a bit longer and rougher than I thought.  But you did volunteer  Now get some data logged!

Here's what the devices display looks like when you link 4 Veras together (205 total devices!).  Of course, you can click down through the machines and categories to make things more visible.  Let me know when you want to connect your machines together in this way!

I'm sure this isn't the last challenge, but thanks for help with beta testing of this UI7 version before it goes into the App Store.  Do let us all know how it goes.

Ok I'll take you informed on how it goes and if I need your support .

donato


Offline Vandamme23

  • Sr. Newbie
  • *
  • Posts: 33
  • Karma: +1/-0
Re: DataYours Beta Test - VERSION 2
« Reply #433 on: February 17, 2015, 09:55:27 am »
Just upgraded the firmware on my Vera Edge to 1.7.961...  Couldn't log in remotely after the upgrade and support had to "remove some cache files" in order to get my remote access back...  Now DataYours is not working...  I get the following error...

[string "module ("DataDash2", package.seeall)..."]:141: attempt to concatenate upvalue 'ROOT' (a nil value)

Offline akbooer

  • Moderator
  • Master Member
  • *****
  • Posts: 6387
  • Karma: +292/-70
  • "Less is more"
Re: DataYours Beta Test - VERSION 2
« Reply #434 on: February 17, 2015, 10:39:15 am »
  • So this was installed before the firmware update and working previously?
  • How did you install it?
  • what version number is the DataCache source file?

3x Vera Lite-UI5/Edge-UI7, 25x Fibaro, 23x TKB, 9x MiniMote, 2x NorthQ Power, 2x Netatmo, 1x Foscam FI9831P, 9x Philips Hue,
Razberry, MySensors Arduino, HomeWave, AltUI, AltHue, DataYours, Grafana, openLuup, ZWay, ZeroBrane Studio.