We have moved at community.getvera.com

Author Topic: Caddx to Vera security  (Read 2234 times)

Offline dmevis

  • Sr. Newbie
  • *
  • Posts: 45
  • Karma: +3/-10
Caddx to Vera security
« on: August 08, 2014, 12:23:41 pm »
I am reviewing my home network to identify ways to increase the security of my network.

I am planning to move my Veralite to a separate sub-net to keep it away from my LAN.  However, within that sub-net, my Caddx Alarm system, my Veralite, and the internet, are all connected.

While I frequently use triggers from my Caddx alarm system in Scenes in my Veralite system, I will NEVER EVER want my Veralite to be able to Arm/Disarm/Change my Caddx alarm.  Said another way, I want my Verlite to have READ ONLY access to my Caddx alarm system.  I appreciate that using the Caddx plug-in, I still need to provide a PIN to arm/disarm my alarm system.  However, I am concerned that this requires only a 4 digit PIN.  Any automated attack coming in via the internet would not take long to get a 4 digit (or even 6 digit) PIN.

So... I would appreciate hearing your thoughts and ideas.

Is there some way to configure/change the Caddx plug-in to make it a Read Only interface to the Caddx alarm?  Perhaps remove the section of LUUA code that traps and passes the PIN to the Caddx alarm?

I don't remember, but is there a configuration setting on the Caddx alarm to go into alarm or lockout if more than a few invalid password attempts are made?

Thoughts?


Offline futzle

  • Moderator
  • Master Member
  • *****
  • Posts: 3260
  • Karma: +192/-9
Re: Caddx to Vera security
« Reply #1 on: August 08, 2014, 07:28:23 pm »
You can do this by programming your NX-8 or NX-584 interface to disable the command "Primary keypad function with PIN".  With this option turned off, the alarm panel will simply refuse to accept any command that requires a PIN. The plugin will note your preference when it starts up and reject Arm/Disarm commands sent to the Vera.

This is explained on the plugin's documentation page under "Preparing the alarm system interface".

Quick Arm (without PIN) is controlled through a separate setting. Read the documentation for how to enable or disable that.

Offline dmevis

  • Sr. Newbie
  • *
  • Posts: 45
  • Karma: +3/-10
Re: Caddx to Vera security
« Reply #2 on: August 11, 2014, 02:24:45 pm »
Thank you for this information.

I will update my NX-584 settings, as you have described.

Offline hinod

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Re: Caddx to Vera security
« Reply #3 on: September 12, 2014, 11:19:50 am »
Am a newby regarding Vera.

1. I am still a little amazed that Zwave users (and vendors) are thinking that they can built a 'real' security system by configuring some motion sensors and door contacts .....

2. One of the solutions is to integrate a high quality security system with domotics
- you are using/discussing the CADDX system
- has any of you come across other options?
- Mybe it is an European thing but I came across the Polish Satel-Integra system which has been integrated with the (also Polish) Fibaro Zwave-system; any experiences?

3. To what extend do you want to integrate? Dmevis has quite strongly emphasized that he does not want to arm/disarm the alarm system from the Vera site; due to inadequate security (4 PIN).
- but does that mean that you also don't want to arm/disarm the alarm system with their proprietorty apps; which will mostly also be a PIN?
- and that arming/disarming can only be done physically on location; either by PIN or tag?

4. Enhancing the alarm system by triggering Zwave modules is sensible (DMevis indicates this as Readonly access)