We have moved at community.getvera.com

Author Topic: UI7 Release Candidate - Serial Port Configuration  (Read 4248 times)

Offline shward1

  • Full Member
  • ***
  • Posts: 117
  • Karma: +5/-0
UI7 Release Candidate - Serial Port Configuration
« on: August 11, 2014, 04:12:47 pm »
When I go to "Develop apps" and click "Serial Port configuration" nothing happens.  Anyone else seeing this behavior?

Offline HaPe

  • Jr. Member
  • **
  • Posts: 60
  • Karma: +0/-0
Re: UI7 Release Candidate - Serial Port Configuration
« Reply #1 on: August 11, 2014, 04:25:18 pm »
Yes, I have the same. Have mailed that to the support today along with a couple of other bugs.

Offline Lucky7

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Re: UI7 Release Candidate - Serial Port Configuration
« Reply #2 on: August 17, 2014, 10:22:26 pm »
I also have this same issue and have sent a note to Vera support.  Has anyone identified a fix / work-around?

Offline SolarCurve

  • Sr. Newbie
  • *
  • Posts: 25
  • Karma: +0/-0
Re: UI7 Release Candidate - Serial Port Configuration
« Reply #3 on: August 19, 2014, 05:20:02 pm »
Same here. Need it to work so I can control my alarm system.

Offline reardorw

  • Newbie
  • *
  • Posts: 15
  • Karma: +0/-0
Re: UI7 Release Candidate - Serial Port Configuration
« Reply #4 on: August 20, 2014, 01:36:54 pm »
Same here.  I am trying to use RFXtrx with UI7. 

Offline joost1981

  • Newbie
  • *
  • Posts: 13
  • Karma: +0/-0
Re: UI7 Release Candidate - Serial Port Configuration
« Reply #5 on: August 26, 2014, 08:41:40 am »
I am experiencing the same issue...  :-[

Anyone had a response from support?

Offline pguraedy

  • Sr. Newbie
  • *
  • Posts: 20
  • Karma: +0/-0
Re: UI7 Release Candidate - Serial Port Configuration
« Reply #6 on: August 30, 2014, 04:36:35 pm »
I have the same problem. Downgraded to UI5. My vera is useless to me without the serial port.

Offline AgileHumor

  • Hero Member
  • *****
  • Posts: 984
  • Karma: +51/-27
  • KISS
Re: UI7 Release Candidate - Serial Port Configuration
« Reply #7 on: August 30, 2014, 04:42:14 pm »
It's a known issue by MCV in current UI7 and will be fixed according to them. No ETA
WMC Leviton:18xVPE06,8xVRS15,3xVRP03-W,2xVRR15,4xVRCS4,2xVRCS2,VP00R,8xVRS15 Aeon:5xDSC06106,4xDSC24,4xDSC25,12xDSB29,2xDSC11,4xDSB54,DSB05,3xDSA22,DSA38,2xDSA03202B,DSB09104,HEM Other:3xYale,12xHSM100v3,7xSP103,45604,WDHA-12,SSA2USR,EVLCD1T,6xWWA02A,7xIPC-HFW2100,URTSI,Hue,Russound,OpenSprinker

Offline joost1981

  • Newbie
  • *
  • Posts: 13
  • Karma: +0/-0
Re: UI7 Release Candidate - Serial Port Configuration
« Reply #8 on: September 11, 2014, 02:56:35 pm »
I contacted support too but got no answer at all.....

I fixed the problem by upgrading to UI7 1.7.353 (EDIT) This version has not been officially anounced/published. I found it by accident. I can confirm that, in my case, everything keeps working and the serial port configuration problem is fixed. Probably no support, but it works for me!

Hope this helps others too. It will probably take some time before it will be officially announced.  :(

I guess this release will probably fix some other issues too.

EDIT : It is not allowed to post links to unofficial firmwares. In this situation, the firmware is broken, "Add device" wizard doesn't work but it can be worst then this, you can BRICK your unit if the firmware is buggy. So please DO NOT INSTALL unofficial firmwares.
« Last Edit: September 12, 2014, 06:40:56 am by mcv.andrei »

Offline helraiser

  • Jr. Member
  • **
  • Posts: 93
  • Karma: +2/-0
Re: UI7 Release Candidate - Serial Port Configuration
« Reply #9 on: September 12, 2014, 09:51:45 am »
So far, the best option is to go back to UI5. That in itself does cause some problems though - Ergy monitoring doesn't work and the downgrade process has to be pre-approved or your unit will auto-upgrade back to UI7.

Besides those things, UI5 does the trick.

Offline j.hoekstra

  • Jr. Member
  • **
  • Posts: 70
  • Karma: +5/-0
Re: UI7 Release Candidate - Serial Port Configuration
« Reply #10 on: September 16, 2014, 10:27:48 am »
I contacted support and it was fixed in 10 minutes.
No real hassle tbh.

Offline helraiser

  • Jr. Member
  • **
  • Posts: 93
  • Karma: +2/-0
Re: UI7 Release Candidate - Serial Port Configuration
« Reply #11 on: September 16, 2014, 11:20:43 am »
 :o

What was fixed in 10mins? Serial port Configuration & USB Logging?  Right now, those are the most important things preventing me from using UI7. If they've got that going then bring it on!

Offline j.hoekstra

  • Jr. Member
  • **
  • Posts: 70
  • Karma: +5/-0
Re: UI7 Release Candidate - Serial Port Configuration
« Reply #12 on: September 18, 2014, 05:15:45 am »
Serial port configuration.
Guess USB-logging can be fixed by them as well?
Open a chat, enable remote access and I'm sure they'll do what it takes.