We have moved at community.getvera.com

Author Topic: Vera3 GE dimmable light switch settings  (Read 1525 times)

Offline whulljr

  • Newbie
  • *
  • Posts: 14
  • Karma: +0/-0
Vera3 GE dimmable light switch settings
« on: September 15, 2014, 01:03:15 pm »
Hello,
I know you can swap the led from on when off to off when on. 
Can you program the brightness level vs going full on when selected or remember last brightness level. 
I would like to have it powered up about 50-75% vs 100% when activated on. 
Look forward to any reply.

Thanks,
Wes

Offline Don Diego

  • Hero Member
  • *****
  • Posts: 534
  • Karma: +300/-3
Re: Vera3 GE dimmable light switch settings
« Reply #1 on: September 15, 2014, 02:50:09 pm »
Hello,
I know you can swap the led from on when off to off when on. 
Can you program the brightness level vs going full on when selected or remember last brightness level. 
I would like to have it powered up about 50-75% vs 100% when activated on. 
Look forward to any reply.

Thanks,
Wes

Hi Wes

   Please see:

 http://www.jascoproducts.com/support/manual-downloads/applications/documentlibrarymanager/upload/45606-manual-eng.pdf

  The pages aren't numbered but if you see the section on "manual control dimming" that should answer your question.

  I hope this helps.

  Don
Vera 3 (@1.5.622) (3); Vera Plus (2);
Trane/Schlage TStats (1); Schlage Deadbolt (2); Kwikset Lock (3);  GE 45602 Dimmer (14); GE 45603 Dimmer (17); HSM-100 (16); Everspring Siren (8), Everspring Temp/Humidity (4); HSM 200 (1)

Offline whulljr

  • Newbie
  • *
  • Posts: 14
  • Karma: +0/-0
Re: Vera3 GE dimmable light switch settings
« Reply #2 on: September 18, 2014, 09:34:14 am »
Thanks for the reply.  I have tried some of those options and it isn't quite working for me.  Those options would either take away dimming options or slow down the increase and decrease dimming rate.  Any suggestions would be greatly appreciated.  Thanks!

Offline oTi@

  • Community Beta
  • Master Member
  • ******
  • Posts: 4041
  • Karma: +32/-6
  • UI what ?!
Re: Vera3 GE dimmable light switch settings
« Reply #3 on: September 18, 2014, 02:20:49 pm »
Are you saying when you tap the top part of the rocker the dimmer goes to 100%, or are you talking about Vera's UI and pressing 'On' there, or a 3rd party control app?
Dezwaved at the moment...

Offline whulljr

  • Newbie
  • *
  • Posts: 14
  • Karma: +0/-0
Re: Vera3 GE dimmable light switch settings
« Reply #4 on: September 19, 2014, 07:22:01 am »
Either way. If I use the UI and toggle on it goes to 100% and the same if I hit the button. 

Offline whulljr

  • Newbie
  • *
  • Posts: 14
  • Karma: +0/-0
Re: Vera3 GE dimmable light switch settings
« Reply #5 on: October 01, 2014, 08:58:52 pm »
Hello,
Ok, so I got it to come on at the last level selected by manually pushing the rocker but when a Zwave command comes in it goes to 100%.  See attached picture to see how it is configured so far.  Any help would be appreciative.