We have moved at community.getvera.com

Author Topic: RFXtrx plugin version beta 3 released  (Read 72693 times)

Offline Yevgen

  • Newbie
  • *
  • Posts: 8
  • Karma: +0/-0
Re: RFXtrx plugin version beta 3 released
« Reply #60 on: December 25, 2014, 04:40:03 am »
Hi,

I own Livolo 1gang switches (no dimmer), Rfxtrx433E (beta3, f/w 233) and Vera3 (UI7). Switches able to run 'All Off' command (to be switched off for sure). In Rfxmngr this command available, but can't find it in RFXtrx devices settings on Vera. Can plugin run All Off?

If I correctly remember, the OFF button should trigger an all Off action while the ON button should trigger a toggle ON/OFF.

a standing alone OFF button is not available in UI7, there is only switch ON/OFF and it switches devices depending on their current state: OFF->ON or ON->OFF. Could you make OFF function equal to ALL OFF for Livolo switches next releases?
« Last Edit: December 25, 2014, 05:03:24 am by Yevgen »

Offline lolodomo

  • Moderator
  • Master Member
  • *****
  • Posts: 3484
  • Karma: +74/-10
Re: RFXtrx plugin version beta 3 released
« Reply #61 on: December 27, 2014, 06:35:17 pm »

a standing alone OFF button is not available in UI7, there is only switch ON/OFF and it switches devices depending on their current state: OFF->ON or ON->OFF. Could you make OFF function equal to ALL OFF for Livolo switches next releases?

I checked again my code and I can confirm that a switch OFF command will send a group OFF while a switch ON command will send a ON/OFF toggle.

Enable the debug logs and then play with ON and then OFF and show me the messages in the logs.

Offline mda

  • Sr. Member
  • ****
  • Posts: 464
  • Karma: +9/-0
Re: RFXtrx plugin version beta 3 released
« Reply #62 on: December 28, 2014, 04:38:38 pm »
@lolodomo Are either of the 433Mhz La Crosse TX7U (Temperature and Humidity) or TX6U (Temperature) sensors supported? Neither are listed on the compatibility chart. Thanks.

Offline mda

  • Sr. Member
  • ****
  • Posts: 464
  • Karma: +9/-0
Re: RFXtrx plugin version beta 3 released
« Reply #63 on: December 31, 2014, 12:45:15 am »
@lolodomo

i am running beta 3 and just got a 4-button LightWaveRF wireless controller, model # JSJSLW206WH (device info is here http://bit.ly/1ryEJhR )

when i press the left button(s) for the first time it creates 2 devices, a light switch named RFX Light L5.0/F412A8/14 and a scene controller named RFX Remote L5.0/F412A8 with Mood 1 - 5 and Group Off buttons. When i press the right button(s) for the first time it adds a light switch named RFX Light L5.0/F412A8/13 (here is a screen shot http://bit.ly/1A9N103).

On the scene controller i have tried setting up notifications for activated and deactivated scenes 111 - 115 but none are triggered when i press any buttons.

I turned on RFX debug and looked at the log when i pressed each button, and it looks like it is activating and deactivating scenes 13 and 14. So i tried setting up notifications for those, but still no luck.

Code: [Select]
10 12/30/14 21:37:31.178 XXX-UpdateSystemMessagesTasks StartupTask #17 = 4 OK / RFXtrx <0x2b4d1680>
50 12/30/14 21:37:36.469 luup_log:116: RFXtrx: debug: Received message: 0A 14 00 00 F4 12 A8 0E 01 00 70  <0x2ef58680>
50 12/30/14 21:37:36.522 luup_log:116: RFXtrx: debug: cmds: L5.0/F412A8/14 On  L5.0/F412A8 LWRFSceneOn 14 <0x2ef58680>
52 12/30/14 21:37:39.410 0x21 0x52 0x46 0x58 0x3a 0x30 0x35 0x31 0x33 0x33 0x39 0x32 0x2c 0x30 0x34 (!RFX:0513392,04) <0x301ac680>
52 12/30/14 21:37:43.039 0x21 0x52 0x46 0x58 0x3a 0x30 0x34 0x31 0x31 0x37 0x30 0x33 0x2c 0x38 0x34 (!RFX:0411703,84) <0x301ac680>
50 12/30/14 21:37:55.978 luup_log:116: RFXtrx: debug: Received message: 0A 14 00 01 F4 12 A8 0E 00 00 70  <0x2ef58680>
50 12/30/14 21:37:56.022 luup_log:116: RFXtrx: debug: cmds: L5.0/F412A8/14 Off  L5.0/F412A8 LWRFSceneOff 14 <0x2ef58680>
50 12/30/14 21:37:56.120 luup_log:116: RFXtrx: debug: Received message: 0A 14 00 02 F4 12 A8 0E 00 00 70  <0x2ef58680>
50 12/30/14 21:37:56.124 luup_log:116: RFXtrx: debug: cmds: L5.0/F412A8/14 Off  L5.0/F412A8 LWRFSceneOff 14 <0x2ef58680>
50 12/30/14 21:38:05.867 luup_log:116: RFXtrx: debug: Received message: 0A 14 00 03 F4 12 A8 0D 01 00 70  <0x2ef58680>
50 12/30/14 21:38:05.921 luup_log:116: RFXtrx: debug: cmds: L5.0/F412A8/13 On  L5.0/F412A8 LWRFSceneOn 13 <0x2ef58680>
50 12/30/14 21:38:11.709 luup_log:116: RFXtrx: debug: Received message: 0A 14 00 04 F4 12 A8 0D 00 00 70  <0x2ef58680>
50 12/30/14 21:38:11.822 luup_log:116: RFXtrx: debug: cmds: L5.0/F412A8/13 Off  L5.0/F412A8 LWRFSceneOff 13 <0x2ef58680>
50 12/30/14 21:38:11.918 luup_log:116: RFXtrx: debug: Received message: 0A 14 00 05 F4 12 A8 0D 00 00 70  <0x2ef58680>
50 12/30/14 21:38:11.932 luup_log:116: RFXtrx: debug: cmds: L5.0/F412A8/13 Off  L5.0/F412A8 LWRFSceneOff 13 <0x2ef58680>

I would like to use each of the 4 buttons to trigger a different Vera scene. (It really is just a scene controller and there not light switches -- it is not connected to mains or any load -- so it seems odd that it creates switch devices)

How should i set that up? Thanks and sorry to bother you.
« Last Edit: December 31, 2014, 12:53:03 am by mda »

Offline lolodomo

  • Moderator
  • Master Member
  • *****
  • Posts: 3484
  • Karma: +74/-10
Re: RFXtrx plugin version beta 3 released
« Reply #64 on: December 31, 2014, 02:30:36 am »
Just define a scene trigger with the remote device on scene activated or scene deactivated and choose scene number 13 or 14.

Offline mda

  • Sr. Member
  • ****
  • Posts: 464
  • Karma: +9/-0
Re: RFXtrx plugin version beta 3 released
« Reply #65 on: December 31, 2014, 03:18:58 am »
Just define a scene trigger with the remote device on scene activated or scene deactivated and choose scene number 13 or 14.

worked. thanks !

i was testing with the Notification tab in the remote device which did not work, but setting up the scene trigger does work. i should have tested that before bothering you. :embarrassed:

Offline lolodomo

  • Moderator
  • Master Member
  • *****
  • Posts: 3484
  • Karma: +74/-10
Re: RFXtrx plugin version beta 3 released
« Reply #66 on: December 31, 2014, 03:23:20 am »
I never played with the notification tab, so don't know how it works.

Offline jolerius

  • Full Member
  • ***
  • Posts: 102
  • Karma: +0/-0
Re: RFXtrx plugin version beta 3 released
« Reply #67 on: December 31, 2014, 05:53:07 am »
Does anyone know how to get ikea anslut to work?? Tried all night yesterday with no luck

Offline mda

  • Sr. Member
  • ****
  • Posts: 464
  • Karma: +9/-0
Re: RFXtrx plugin version beta 3 released
« Reply #68 on: January 02, 2015, 12:02:43 am »
@lolodomo Are either of the 433Mhz La Crosse TX7U (Temperature and Humidity) or TX6U (Temperature) sensors supported? Neither are listed on the compatibility chart. Thanks.

@ lolodomo  - i think this question above might have gotten lost. if you have a moment, could you let me know if they are supported? Thanks!

Offline lolodomo

  • Moderator
  • Master Member
  • *****
  • Posts: 3484
  • Karma: +74/-10
Re: RFXtrx plugin version beta 3 released
« Reply #69 on: January 02, 2015, 03:34:20 am »
@lolodomo Are either of the 433Mhz La Crosse TX7U (Temperature and Humidity) or TX6U (Temperature) sensors supported? Neither are listed on the compatibility chart. Thanks.

@ lolodomo  - i think this question above might have gotten lost. if you have a moment, could you let me know if they are supported? Thanks!

The question has to be asked to RFXCOM.

Offline jolerius

  • Full Member
  • ***
  • Posts: 102
  • Karma: +0/-0
Re: RFXtrx plugin version beta 3 released
« Reply #70 on: January 02, 2015, 05:21:21 am »
Is there anyway to get a log from the rfxtrx? I want to see if anything is happening when trying to find my ikea anslut

Offline lolodomo

  • Moderator
  • Master Member
  • *****
  • Posts: 3484
  • Karma: +74/-10
Re: RFXtrx plugin version beta 3 released
« Reply #71 on: January 02, 2015, 05:43:30 am »
Is there anyway to get a log from the rfxtrx? I want to see if anything is happening when trying to find my ikea anslut

You can enable the debug logs through the plugin UI (tab Plugin settings). Any received message from the RFXtrx will then be logged.

Offline jolerius

  • Full Member
  • ***
  • Posts: 102
  • Karma: +0/-0
Re: RFXtrx plugin version beta 3 released
« Reply #72 on: January 02, 2015, 05:50:10 am »
And where do I find the log then??

Offline lolodomo

  • Moderator
  • Master Member
  • *****
  • Posts: 3484
  • Karma: +74/-10
Re: RFXtrx plugin version beta 3 released
« Reply #73 on: January 02, 2015, 05:51:23 am »
And where do I find the log then??

In the Vera log file: /var/log/cmh/LuaUPnP.log

Offline jolerius

  • Full Member
  • ***
  • Posts: 102
  • Karma: +0/-0
Re: RFXtrx plugin version beta 3 released
« Reply #74 on: January 02, 2015, 05:53:43 am »
Feeling a bit dumb here. But how do I open/read It??