We have moved at community.getvera.com

Author Topic: Zipato RGBW Bulb  (Read 18181 times)

Offline HouseBot

  • Full Member
  • ***
  • Posts: 210
  • Karma: +1/-1
Zipato RGBW Bulb
« on: October 25, 2014, 01:45:37 pm »
Have anybody tried to add this light bulb to Vera with positive result?
http://www.zipato.com/default.aspx?id=24&pid=81&page=1&grupe=
I like to know before I make the order.


Offline ChuTn3Y

  • Sr. Newbie
  • *
  • Posts: 26
  • Karma: +0/-0
Re: Zipato RGBW Bulb
« Reply #1 on: October 30, 2014, 08:22:25 am »
Yeah good question, if somebody can give us an answer .. Thanks

Offline uros76

  • Newbie
  • *
  • Posts: 17
  • Karma: +0/-0
Re: Zipato RGBW Bulb
« Reply #2 on: October 31, 2014, 10:15:01 am »
I bought one and its not fully supported by Vera. I get only dimable white lamp with limited settings. No RGB support. It is more or less designed for zipato environment.
Probably will sell mine soon...

Offline ChuTn3Y

  • Sr. Newbie
  • *
  • Posts: 26
  • Karma: +0/-0
Re: Zipato RGBW Bulb
« Reply #3 on: October 31, 2014, 08:32:46 pm »
I bought one and its not fully supported by Vera. I get only dimable white lamp with limited settings. No RGB support. It is more or less designed for zipato environment.
Probably will sell mine soon...

Thx for your answer ! Are you in UI7 or less ?

Offline uros76

  • Newbie
  • *
  • Posts: 17
  • Karma: +0/-0
Re: Zipato RGBW Bulb
« Reply #4 on: November 03, 2014, 03:52:15 am »
I am on UI5. Hearing bad reviews for UI7 so I am not planning an upgrade any soon.

Offline ideschamps

  • Sr. Newbie
  • *
  • Posts: 25
  • Karma: +0/-0
Re: Zipato RGBW Bulb
« Reply #5 on: November 19, 2014, 01:36:08 am »
Got one of these yesterday. Able to configure it on UI7, but as previously posted only warm white and dimmable. Keep on getting Failed at getting manufacturer info. I have logged a ticket with MIOS to add support for this.

One downside I have seen is that if you put your power switch back on it doesn't go to previous level, need to control it via the Vera interface to put it back on. Could be just because of the configuration.


Offline JS007

  • Sr. Member
  • ****
  • Posts: 319
  • Karma: +1/-3
Re: Zipato RGBW Bulb
« Reply #6 on: December 03, 2014, 03:00:37 pm »
just got one of these Zipato bulbs too, installed on VeraEdge, UI7 (1.7.850) , same thing

only warm white on\off and dimmable, no color options,  and also keep on getting Failed at getting manufacturer info

this is a Zwave Plus device

opened ticket with support and gave them access to a vistacam pointed at light to help them troubleshoot issue
« Last Edit: December 03, 2014, 03:21:21 pm by JS007 »

Offline garrettfarmer

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Re: Zipato RGBW Bulb
« Reply #7 on: December 22, 2014, 01:32:16 am »
Has anyone received any feedback from support on the RGBW bulb yet?

Offline ITechGeek

  • Newbie
  • *
  • Posts: 4
  • Karma: +1/-0
Re: Zipato RGBW Bulb
« Reply #8 on: December 30, 2014, 08:07:38 am »
Has support looked at this issue yet?

Offline JS007

  • Sr. Member
  • ****
  • Posts: 319
  • Karma: +1/-3
Re: Zipato RGBW Bulb
« Reply #9 on: December 30, 2014, 12:25:25 pm »
have not heard back on any updates yet

"Failed at getting manufacturer" is fixed, but still no color, for now it's just an on\off dimable white bulb
« Last Edit: December 30, 2014, 12:27:58 pm by JS007 »

Offline JS007

  • Sr. Member
  • ****
  • Posts: 319
  • Karma: +1/-3
Re: Zipato RGBW Bulb
« Reply #10 on: December 30, 2014, 05:14:48 pm »
this is the a doc on it, thought not sure how to set the option #1

http://www.pepper1.net/zwavedb/device/587

Paramter No.    1    Size    1    Default    50
Name    Color temperature
Description    Configuration option 1 is used to adjust color temperature. Values range from 0 to 100 where 0 means full cold white and 100 means full warm white.
Type    range
Values    
1 - 100      ->      Color temperature


ETA : never mind, that is just the white temperature anyways, that works
« Last Edit: December 30, 2014, 05:29:43 pm by JS007 »

Offline martynwendon

  • Full Member
  • ***
  • Posts: 120
  • Karma: +15/-1
Re: Zipato RGBW Bulb
« Reply #11 on: January 29, 2015, 06:09:36 am »
We recently tested the Zipatio RGBW LED Bulb in Vera and came up with a workaround to control the colour channels.

More information at http://www.vesternet.com/resources/application-notes/apnt-91


Hope that helps!


Martyn@Vesternet

Offline garrettfarmer

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Re: Zipato RGBW Bulb
« Reply #12 on: February 01, 2015, 04:58:49 pm »
I have tried the work around with no success.

Lua Test results below, but no color change:

LuaTest 1.6

Lua file: /etc/cmh-ludl/luatest.lua

Results
No errors
Runtime: 1.6 ms
Code returned: nil

Print output
(none)

Code
   1   luup.call_action('urn:micasaverde-com:serviceId:ZWaveNetwork1','SendData',{Node='6',Data='51 5 2 2 125'},1)

Offline vosmont

  • Beta Testers
  • Hero Member
  • *****
  • Posts: 687
  • Karma: +60/-8
Re: Zipato RGBW Bulb
« Reply #13 on: February 03, 2015, 04:45:29 am »
Perhaps the plugin RGB Controller is able to manage the Zipato Bulb (it uses Zwave commands to set RGB color)

Offline JS007

  • Sr. Member
  • ****
  • Posts: 319
  • Karma: +1/-3
Re: Zipato RGBW Bulb
« Reply #14 on: February 04, 2015, 12:09:58 pm »
We recently tested the Zipatio RGBW LED Bulb in Vera and came up with a workaround to control the colour channels.

More information at http://www.vesternet.com/resources/application-notes/apnt-91


Hope that helps!


Martyn@Vesternet

thanks, that did work for me

luup.call_action('urn:micasaverde-com:serviceId:ZWaveNetwork1','SendData',{Node='58',Data='51 5 2 4 255'},1)

made it blue as an example, the 255 is full brightness, the 58 is my device id in the setting section

doesn't seem to always take though
« Last Edit: February 04, 2015, 12:17:12 pm by JS007 »