Author Topic: BroadLink Mark II plugin  (Read 7256 times)

Offline PrincessCleavage

  • Full Member
  • ***
  • Posts: 206
  • Karma: +3/-1
Re: BroadLink Mark II plugin
« Reply #105 on: June 20, 2018, 07:44:56 am »
@PrincessCleavage. Note this approach is only required if the discovery process doesn't work. If I get some time I might try and make this process a little easier. Please follow the instructions as outlined here:

http://forum.micasaverde.com/index.php/topic,53871.msg375134.html#msg375134

Your final edit can be validated here:

https://jsonlint.com/

Try to validate your own version in your post above. And noting the values you have for blInternalId & blKey are not as I described. Just change the mac address and the ip address - nothing else - in the json code below:


Code: [Select]
{
"3d:8e:43:43:ea:3d": {
"blInternalId": "????",
"blKey": "097628343fe99e23765c1513accf8b02",
"blDeviceType": 10039,
"blIp": "192.168.1.95",
"blDesc": "RM Mini 1"
},
"3d:8e:43:43:ea:3e": {
"blInternalId": "????",
"blKey": "097628343fe99e23765c1513accf8b02",
"blDeviceType": 10039,
"blIp": "192.168.1.95",
"blDesc": "RM Mini 2"
}
}
Hi again a-lurker
I now have a third RM mini that I would like to add to Vera,
Would you please be able to help with the correct code to manually add three RM mini ?

Online a-lurker

  • Hero Member
  • *****
  • Posts: 844
  • Karma: +58/-8
Re: BroadLink Mark II plugin
« Reply #106 on: June 20, 2018, 08:15:07 am »
Mmmm - I really should make this easier one day :)

Just change the mac address and the ip address - nothing else - in the json code below - for each of the three devices for the variable 'BroadLinkDevices', then restart the Luup engine:

Code: [Select]
{
"3d:8e:43:43:ea:3d": {
"blInternalId": "????",
"blKey": "097628343fe99e23765c1513accf8b02",
"blDeviceType": 10039,
"blIp": "192.168.1.95",
"blDesc": "RM Mini 1"
},
"3d:8e:43:43:ea:3e": {
"blInternalId": "????",
"blKey": "097628343fe99e23765c1513accf8b02",
"blDeviceType": 10039,
"blIp": "192.168.1.95",
"blDesc": "RM Mini 2"
},
"3d:8e:43:43:ea:3f": {
"blInternalId": "????",
"blKey": "097628343fe99e23765c1513accf8b02",
"blDeviceType": 10039,
"blIp": "192.168.1.95",
"blDesc": "RM Mini 3"
}
}

Let us know what you have going with the plugin.

Offline PrincessCleavage

  • Full Member
  • ***
  • Posts: 206
  • Karma: +3/-1
BroadLink Mark II plugin
« Reply #107 on: June 21, 2018, 03:21:11 am »
Mmmm - I really should make this easier one day 😊

Just change the mac address and the ip address - nothing else - in the json code below - for each of the three devices for the variable 'BroadLinkDevices', then restart the Luup engine:

Code: [Select]
{
"3d:8e:43:43:ea:3d": {
"blInternalId": "????",
"blKey": "097628343fe99e23765c1513accf8b02",
"blDeviceType": 10039,
"blIp": "192.168.1.95",
"blDesc": "RM Mini 1"
},
"3d:8e:43:43:ea:3e": {
"blInternalId": "????",
"blKey": "097628343fe99e23765c1513accf8b02",
"blDeviceType": 10039,
"blIp": "192.168.1.95",
"blDesc": "RM Mini 2"
},
"3d:8e:43:43:ea:3f": {
"blInternalId": "????",
"blKey": "097628343fe99e23765c1513accf8b02",
"blDeviceType": 10039,
"blIp": "192.168.1.95",
"blDesc": "RM Mini 3"
}
}

Let us know what you have going with the plugin.
[/
Seems I have lost functionality too two units, may have to remove the from device and reads all three.
I have one unit controlling Roomba vacuum, one unit in the bedroom that turns on Xbox one,tv and changed to hdmi port 3 then starts ?Emby? application on Xbox one and can also turn off Xbox one and tv and the third unit is 100,000mAh solar powered battery with USB outputs that sits buried in the front garden, it has an rm mini and a ?moon? replica ball shaped led light that sits on top of thin clear perspex plastic (gives the impression of floating moon) that turns on when car enters the drive way or motion passes by ( motion sensor ) all connected to Vera.
Edit: after removing the units and re-adding them using the supplied code I now have 3 working RM mini 3 devices.

Thanks!
« Last Edit: June 21, 2018, 06:52:17 am by PrincessCleavage »