Author Topic: Z-Wave.me iTemp battery status problems!  (Read 1052 times)

Offline cw-kid

  • Beta Testers
  • Hero Member
  • *****
  • Posts: 1611
  • Karma: +18/-2
Z-Wave.me iTemp battery status problems!
« on: January 27, 2015, 07:25:54 am »
Hi

I have a Z-wave.me iTemp device in my lounge which I also wired up the dry contact to my existing door bell to make it Z-wave enabled.

It works but the battery level status in Vera UI5 (V1.5.622) never seems to work properly. It is usually grey with a question mark next to it.

I used two AAA rechargeable batteries in the device, when I put newly charged ones in the battery status will change to orange and be OK for a while but then really when ever I look at the device in the Vera web UI its gone grey again with the question mark.

The device still appears to be working when the battery status is grey as I still get door bell button press notifications etc.

Anyone know what the problem is?

Thanks


Offline cw-kid

  • Beta Testers
  • Hero Member
  • *****
  • Posts: 1611
  • Karma: +18/-2
Re: Z-Wave.me iTemp battery status problems!
« Reply #1 on: January 27, 2015, 07:38:06 am »
Interestingly it does say battery level is 35% on the Settings tab

Offline cw-kid

  • Beta Testers
  • Hero Member
  • *****
  • Posts: 1611
  • Karma: +18/-2
Re: Z-Wave.me iTemp battery status problems!
« Reply #2 on: February 21, 2015, 07:22:47 am »
This seems to have solved the issue with the battery status showing a question mark.

In the device options tab I entered 1 in the Send Unsolicited Battery Report. Since then the battery status has always been displayed OK.

However the temperature sensor on this device seems not to work very well and is always off on it temp readings.

« Last Edit: February 21, 2015, 07:30:20 am by cw-kid »