Author Topic: UI7 Firmware Custom URL's  (Read 24719 times)

Offline sowalsup

  • Newbie
  • *
  • Posts: 10
  • Karma: +0/-0
Re: UI7 Firmware Custom URL's
« Reply #30 on: November 02, 2015, 08:42:55 am »
Does anyone know if the latest firmware has fixed the Monoprice door sensors always showing tripped?

I've been running 1.7.541, but if it's been fixed I wanted to upgrade.

Offline integlikewhoa

  • Master Member
  • *******
  • Posts: 5575
  • Karma: +150/-367
Re: UI7 Firmware Custom URL's
« Reply #31 on: November 02, 2015, 10:30:12 am »
Does anyone know if the latest firmware has fixed the Monoprice door sensors always showing tripped?

I've been running 1.7.541, but if it's been fixed I wanted to upgrade.

I don't have any monoprice sensors, but I skipped the last few updates for other issues and now upgraded without any problems so far. I also haven't heard of anyone saying the beta wreaked their system and its been out for a week or so.

I would feel comfortable to tell you to run a backup and upgrade to beta to test it out. I don't see you having problems. 

Offline crimsondr

  • Full Member
  • ***
  • Posts: 148
  • Karma: +1/-1
Re: UI7 Firmware Custom URL's
« Reply #32 on: November 06, 2015, 09:20:42 am »
Does anyone know if the latest firmware has fixed the Monoprice door sensors always showing tripped?

I've been running 1.7.541, but if it's been fixed I wanted to upgrade.

sowalsup, did you try the upgrade?  I'm waiting for a guinea pig to try before me lol

Offline sowalsup

  • Newbie
  • *
  • Posts: 10
  • Karma: +0/-0
Re: UI7 Firmware Custom URL's
« Reply #33 on: November 06, 2015, 09:25:55 am »
Does anyone know if the latest firmware has fixed the Monoprice door sensors always showing tripped?

I've been running 1.7.541, but if it's been fixed I wanted to upgrade.

sowalsup, did you try the upgrade?  I'm waiting for a guinea pig to try before me lol

Haha no, I've spent enough time being a Vera guinea pig. I am also waiting on someone else!  I'm just tired of the firmware page loading every time I log in.

Offline integlikewhoa

  • Master Member
  • *******
  • Posts: 5575
  • Karma: +150/-367
Re: UI7 Firmware Custom URL's
« Reply #34 on: November 06, 2015, 11:19:25 am »
Does anyone know if the latest firmware has fixed the Monoprice door sensors always showing tripped?

I've been running 1.7.541, but if it's been fixed I wanted to upgrade.

sowalsup, did you try the upgrade?  I'm waiting for a guinea pig to try before me lol

Haha no, I've spent enough time being a Vera guinea pig. I am also waiting on someone else!  I'm just tired of the firmware page loading every time I log in.

http://forum.micasaverde.com/index.php/topic,11964.msg255254.html#msg255254

Post or Reply 925

I installed the latest beta firmware (isnt' all the UI7 firmware a beta?  ;D) and it seems to have solved some issues I've been having with the monoprice door/window sensors. So now I've been able to install them on my garage doors and provide their status to my wall tablets and scenes. In particular, my night-scene has been updated to make sure the garage doors are closed.

I don't have monoprice sensors but thought I would pass it on. Also for the items I do have everything has gotten better or stayed the same with the BETA. Took 10 min to install and no problems. Save a backup and if you don't like it 10 min to go back.

Offline 4994james

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Re: UI7 Firmware Custom URL's
« Reply #35 on: January 30, 2016, 03:35:30 pm »
Hi I am trying to downgade my Vera Edge to try to fix a problem with Powermax creating unwanted notifications.  I have read that an earlier version will correct this.  I try to downgrade to 7.0.9 (1.7.1278) but when it comes back up it says it is running 1.7.1419.  Am I doing something wrong?
« Last Edit: January 30, 2016, 03:37:25 pm by 4994james »

Offline KewlRobD

  • Full Member
  • ***
  • Posts: 105
  • Karma: +3/-3
Re: UI7 Firmware Custom URL's
« Reply #36 on: March 10, 2016, 08:19:19 am »
Hi I am trying to downgade my Vera Edge to try to fix a problem with Powermax creating unwanted notifications.  I have read that an earlier version will correct this.  I try to downgrade to 7.0.9 (1.7.1278) but when it comes back up it says it is running 1.7.1419.  Am I doing something wrong?

Did you ever figure this out?  I am having the same issue.  Best I can tell it does do the downgrade but them immediately upgrades to the previously installed firmware. 
« Last Edit: March 10, 2016, 08:48:09 am by KewlRobD »

Offline snovvman

  • Full Member
  • ***
  • Posts: 189
  • Karma: +2/-1
Re: UI7 Firmware Custom URL's
« Reply #37 on: April 21, 2016, 09:23:49 am »
I'll add a couple of links for Vera Plus:

The general distro 1.7.1754
http://dl.mios.com/firmware/mt7621/mios/release/mt7621_Luup_ui7-1.7.1754-en-mios.squashfs

I received my Vera Plus with 1.7.1786
http://dl.mios.com/firmware/mt7621/mios/release/mt7621_Luup_ui7-1.7.1786-en-mios.squashfs

When asked, customer support said that some VPs were 'accidentally' released with 1786, but it should work fine.

After my Vera Lite to Vera Plus upgrade, I had to 'Program Node Now' on my battery powered devices.  However, the notifications generated by those devices still go to Vera Lite.  I therefore cannot turn off Vera Lite.  Support is advising me to downgrade (even though they call it upgrade) to 1754.  I've read many VP owners having the same issue as me, so I doubt that 1754 will solve the problem......

Offline snovvman

  • Full Member
  • ***
  • Posts: 189
  • Karma: +2/-1

Offline crimsondr

  • Full Member
  • ***
  • Posts: 148
  • Karma: +1/-1
Re: UI7 Firmware Custom URL's
« Reply #39 on: August 19, 2016, 10:28:47 am »
Do the monoprice sensors work properly on the latest VeraEdge firmware?

Offline snovvman

  • Full Member
  • ***
  • Posts: 189
  • Karma: +2/-1

Offline Cor

  • Hero Member
  • *****
  • Posts: 1108
  • Karma: +4/-4
Re: UI7 Firmware Custom URL's
« Reply #41 on: January 13, 2017, 09:49:36 am »
Cool Thanks!

got also one for vera3?

Cor

Offline Jeff D

  • Sr. Newbie
  • *
  • Posts: 33
  • Karma: +0/-0

Offline Ionmih83

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Re: UI7 Firmware Custom URL's
« Reply #43 on: September 04, 2017, 01:22:59 pm »
Hi guys ,
You should know that i damage my vera edge unit while trying to downgrade to this version UI7 7.0.10 : https://download1204.mios.com/rl/710/mt7620a_Luup_ui7-1.7.1320-en-mios.squashfs . So do not use this firmware if you unit warranty is out of date.