We have moved at community.getvera.com

Author Topic: Aeon Labs Minimote Disable All Off Buttons?  (Read 740 times)

Offline l8nighter

  • Jr. Member
  • **
  • Posts: 62
  • Karma: +9/-0
Aeon Labs Minimote Disable All Off Buttons?
« on: June 18, 2015, 09:40:35 pm »
Is there a way to disable the "All Off" feature on the Aeon Labs Minimote? I accidentally pushed both the bottom-left and bottom-right scene buttons together and all of my Z-Wave devices in my house turned off and I didn't know why until I read the manual. Is there a way to disable this feature as I am using a Vera Lite?  Does anyone know if the remote is sending the all off command to the z-wave devices or is it sending the command to the Vera and the Vera is turning off all the lights and I could block that somehow?  Thank You

Here is what the manual says:
http://aeotec.com/small-z-wave-remote-control/935-minimote-manual-instructions.html
All Off ? Turn Off All Z-Wave Devices in the Network
1Press and hold the bottom-left and bottom-right scene buttons together.

Offline shallowearth

  • Hero Member
  • *****
  • Posts: 999
  • Karma: +47/-9
Re: Aeon Labs Minimote Disable All Off Buttons?
« Reply #1 on: June 19, 2015, 01:50:31 am »
I don't think the minimote is configurable that way

Some z-wave devices you can tell them to ignore the All Off command (it is a special z-wave command), but my guess is many do not so it depends on what devices you have.

The minimote will also send the All On command if you push the top left and right buttons together.