Author Topic: d-link DCH-Z110  (Read 5140 times)

Offline MichuP

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Re: d-link DCH-Z110
« Reply #15 on: March 19, 2017, 02:34:52 am »
Hi everyone, my first post here. Nice to meet you.
I found good explanation for D-link sensors configuration in Vesternet site. It works well in Vera Plus.
Dch-z110: http://www.vesternet.com/resources/application-notes/apnt-136

Dch-z120:
http://www.vesternet.com/resources/application-notes/apnt-135

By the way I have problem with association D-link Dch-z120 PIR sensor with Qubino 2x relay.
It doesn't work.
 In D-link there is parent device which make possible define association in device options. In embedded device 'motion sensor' isn't possible association definition. Only motion sensor detects movement and change state. I suppose that parent device doesn't send order to relay.

Anybody solve this kind of problem?

Scenes of course works well but controller has to be on line.
Regards

Wysłane z mojego ONEPLUS A3003 przy użyciu Tapatalka
« Last Edit: March 19, 2017, 02:44:09 am by MichuP »

Offline Domoworking

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-0
Re: d-link DCH-Z110
« Reply #16 on: April 15, 2018, 12:41:28 pm »
Thx MichuP
I configured my z110 as suggested in the link you posted, but I'm still struggling reading light and temperature.
It Always reports 1 Lux and 25? C...

Any suggestion?

Regards