Author Topic: openLuup: Known working plugins  (Read 9678 times)

Offline CudaNet

  • Beta Testers
  • Hero Member
  • *****
  • Posts: 1401
  • Karma: +42/-11
  • Chimichanga !
openLuup: Known working plugins
« on: March 18, 2016, 01:25:08 pm »
I'm hoping with the contribution of others we can have a running list of known working plugins.. As much as we all try to stay away from 'adjusting' code, if you had to (for whatever reason) please explain or post the update needed to get it up and running.


Note: that any plugin in the AltAppStore with an Alt button to download should work!


Ademco Vista Alarm Panel with EVL3/4 (thanks to Cybrmage). [CN]
Arduino - connect to MySensors Ethernet gateway (not serial, unless you use ser2net or similar). [AK]
ALTHue. [@amg0]
BatteryMonitor. [rafale77]
Caseta Connect. [cybrmage]
Chamberlain MyQ (local ltn12 = require "ltn12" for proper operation). [DesT]
Combination Switch (by @futzle). [jswim788]
CountdownTimer (by @futzle). [jcsv75]
DataMine. [explorer]
DataMine2 [a-lurker, requires manual intervention to set up]
DataYours (obviously). [CN]
DayTime. [explorer]
Deus Ex Machina II (@RigPapa). [rafale77]
ecobee (@Watou) [modified by @rafale77 to work on openLuup]
Enphase Envoy Solar Monitor. [reneboer]
EventWatcher. [AK]
FritzBox Sensor [reneboer]
GC100 [a-lurker: http://forum.micasaverde.com/index.php/topic,37268.msg320919.html#msg320919]
Google Calendar (1.3 - 1.4; Verified 2.01 works w/ updated GCal3.lua when not Vera/OpenWRT). [CN]
Harmony Hub Control (thanks to reneboer). [CN]
Heliotrope. [AK]
Homewave Push. [CN]
Honeywell TCC (thanks to Mikee). [CN]
HouseMode. [DesT]
ImperiHomeDevice. [explorer]
IPhoneLocator 2.34. [amg0]
ISYController (adjusted; thanks to explorer). [explorer]
IOS Push. [CN]
Magic Home Wifi LED Control (using "Magic Home Wifi LED Control" written by ceefin.) [NikV]
MiLightRGBW (RexBeckett). [ChrisTheC]
MQTT (Mosquitto). [CN]
Multi-string (aka Variable Container). [CN]
MultiSwitch (it uses pluto-lzo to re-write button labels, so that command doesn't work). [AK]
     ... but can me made to [thanks @reneboer] http://forum.micasaverde.com/index.php/topic,37771.msg282592.html#msg282592 
MyQ [DesT] but needs a one-line mod, see http://forum.micasaverde.com/index.php/topic,36939.msg334724.html#msg334724
Nest (Watou version). [CN]
Netatmo. [AK]
OpenSprinkler [DesT] (replace json require "/usr/lib/lua/akb-json" with "openLuup.json")
Opentherm Gateway. [reneboer]
openWeather (thanks to logread; found here http://forum.micasaverde.com/index.php/topic,36777.0.html). [logread]
OWserver [a-lurker: may need to fiddle with json lib file and location]
Philips Hue by MCV (v.092 thanks to Cybrmage). [CN]
Ping Sensor. [CN]
PioneerReceiver (I developed a new version of the plugin on openLuup/ALTUI : https://github.com/sle118/mios-pioneer-receiver). [sle118] [rafele77]
Plantlink (originally by @airedale?) [@rafale77 modified for openLuup and UI7: https://github.com/rafale77/Vera-Plantlink]
Rainforest Automation HEM (requires Lua BitOp). [CN]
RGBController. [vosmont]
RFXTRX via usb [Forzaalfa]
RulesEngine (thanks to Vosmont). [vosmont]
SiteSensor. [RigPapa]
Smart Virtual Thermostat (edit the L_SmartVT so that the function AvgTemperature does not check a battery level). [logread]
SMTP Notification [jswim788]
Sonos (many thanks goes out to Explorer for the much needed adjustments). [explorer]
Squeezebox (provided that the default protocol of 'cr' is implemented in openLuup or in the device file). [sle118]
UPnPProxy (adjusted; many thanks to Explorer). [explorer]
UPS Sensor [reneboer]
Venstar Colortouch. [cybrmage]
Virtual Rain Sensor (@blakem). [rafale77]
Virtual Switch. [logread]
Wink Connect. [cybrmage]
Yamaha-RX-HTTP. [a-lurker]
YouLess Energymeter. [Egbert]


« Last Edit: July 14, 2018, 05:31:35 am by akbooer »
openLuup, AltUI, Zway and HomeWave, enough said...

Offline akbooer

  • Moderator
  • Master Member
  • *****
  • Posts: 6343
  • Karma: +288/-70
  • "Less is more"
Re: openLuup: Known working plugins
« Reply #1 on: March 18, 2016, 01:37:49 pm »
I take it you'll be updating the first post in this thread according to others' responses?  I can help with that.

Unmodified we have, for a start:

Arduino - connect to MySensors Ethernet gateway (not serial, unless you use ser2net or similar)
EventWatcher
Heliotrope
MultiSwitch - but it uses pluto-lzo to re-write button labels, so that command doesn't work
Netatmo

Can we keep it in alphabetical order?
3x Vera Lite-UI5/Edge-UI7, 25x Fibaro, 23x TKB, 9x MiniMote, 2x NorthQ Power, 2x Netatmo, 1x Foscam FI9831P, 9x Philips Hue,
Razberry, MySensors Arduino, HomeWave, AltUI, AltHue, DataYours, Grafana, openLuup, ZWay, ZeroBrane Studio.

Offline CudaNet

  • Beta Testers
  • Hero Member
  • *****
  • Posts: 1401
  • Karma: +42/-11
  • Chimichanga !
Re: openLuup: Known working plugins
« Reply #2 on: March 18, 2016, 01:39:02 pm »
Absolutely...

I take it you'll be updating the first post in this thread according to others' responses?  I can help with that.

Unmodified we have, for a start:

Arduino - connect to MySensors Ethernet gateway (not serial, unless you use ser2net or similar)
EventWatcher
Heliotrope
MultiSwitch - but it uses pluto-lzo to re-write button labels, so that command doesn't work
Netatmo
openLuup, AltUI, Zway and HomeWave, enough said...

Offline cybrmage

  • Beta Testers
  • Hero Member
  • *****
  • Posts: 1104
  • Karma: +113/-43
Re: openLuup: Known working plugins
« Reply #3 on: March 18, 2016, 03:01:53 pm »
The latest version of Wink Connect, Caseta Connect and Venstar Colortouch plugins also work...

-----

ok! Added to the list [AK]
« Last Edit: March 18, 2016, 03:25:07 pm by akbooer »

Offline Egbert

  • Jr. Member
  • **
  • Posts: 64
  • Karma: +0/-0
Re: openLuup: Known working plugins
« Reply #4 on: March 18, 2016, 03:36:14 pm »
The YouLess Energymeter works without any problems.

Offline logread

  • Full Member
  • ***
  • Posts: 214
  • Karma: +7/-1
Re: openLuup: Known working plugins
« Reply #5 on: March 18, 2016, 05:58:13 pm »
Virtual Switch from chixxi works as well
Vera Lite UI7, Fibaro FGS-221, FGS-212, FGSS-001, FGK-101, FGWPE/F-101, FGMS-001, Aeon HEM G2, GreenWave PowerNode 6,  Everspring ST-814, SE-812, Swiid SwiidInter.
Raspberry Pi2 Raspbian w/ openLuup. AltUI, SV Thermostat, Virtual Switch, Weather (openWeather), System Monitor (openSysMon), HomeWave.

Offline logread

  • Full Member
  • ***
  • Posts: 214
  • Karma: +7/-1
Re: openLuup: Known working plugins
« Reply #6 on: March 18, 2016, 06:13:11 pm »
The Smart Virtual Thermostat works with some minor tweaking: edit the L_SmartVT so that the function AvgTemperature does not check a battery level (as a proxy check for the device being alive) from the parent device of the surveyed sensors. I can post instructions if anyone needs these

Not sure if this fits this thread, but I rewrote and posted a (simplified) Weather Underground plugin since the original was encrypted and therefore not running on openLuup
Vera Lite UI7, Fibaro FGS-221, FGS-212, FGSS-001, FGK-101, FGWPE/F-101, FGMS-001, Aeon HEM G2, GreenWave PowerNode 6,  Everspring ST-814, SE-812, Swiid SwiidInter.
Raspberry Pi2 Raspbian w/ openLuup. AltUI, SV Thermostat, Virtual Switch, Weather (openWeather), System Monitor (openSysMon), HomeWave.

guest20975

  • Guest
Re: openLuup: Known working plugins
« Reply #7 on: March 19, 2016, 05:34:03 am »
The Smart Virtual Thermostat works with some minor tweaking: edit the L_SmartVT so that the function AvgTemperature does not check a battery level (as a proxy check for the device being alive) from the parent device of the surveyed sensors. I can post instructions if anyone needs these

Not sure if this fits this thread, but I rewrote and posted a (simplified) Weather Underground plugin since the original was encrypted and therefore not running on openLuup
logread, I would be grateful if you could post the instructions for modifying L_SmartVT, many thanks.

Offline vosmont

  • Beta Testers
  • Hero Member
  • *****
  • Posts: 687
  • Karma: +60/-8
Re: openLuup: Known working plugins
« Reply #8 on: March 19, 2016, 06:46:40 am »
RulesEngine works

Offline logread

  • Full Member
  • ***
  • Posts: 214
  • Karma: +7/-1
Re: openLuup: Known working plugins
« Reply #9 on: March 19, 2016, 08:04:27 am »
@dsroberts1945,

I just found another issue with porting the Smart Virtual Thermostat... It is actually not yet fully functional... Am debugging this now and will shortly create a thread with the changes to make. Will send you a PM when I do this
Vera Lite UI7, Fibaro FGS-221, FGS-212, FGSS-001, FGK-101, FGWPE/F-101, FGMS-001, Aeon HEM G2, GreenWave PowerNode 6,  Everspring ST-814, SE-812, Swiid SwiidInter.
Raspberry Pi2 Raspbian w/ openLuup. AltUI, SV Thermostat, Virtual Switch, Weather (openWeather), System Monitor (openSysMon), HomeWave.

Offline akbooer

  • Moderator
  • Master Member
  • *****
  • Posts: 6343
  • Karma: +288/-70
  • "Less is more"
Re: openLuup: Known working plugins
« Reply #10 on: March 26, 2016, 10:24:18 am »
I just found another issue with porting the Smart Virtual Thermostat... It is actually not yet fully functional...

...wonder if you could try out the new VeraBridge v2.0 in the development branch?  This may obviate the need for your source code change.  Be interested to know!  Thanks.
3x Vera Lite-UI5/Edge-UI7, 25x Fibaro, 23x TKB, 9x MiniMote, 2x NorthQ Power, 2x Netatmo, 1x Foscam FI9831P, 9x Philips Hue,
Razberry, MySensors Arduino, HomeWave, AltUI, AltHue, DataYours, Grafana, openLuup, ZWay, ZeroBrane Studio.

Offline logread

  • Full Member
  • ***
  • Posts: 214
  • Karma: +7/-1
Re: openLuup: Known working plugins
« Reply #11 on: March 26, 2016, 01:53:33 pm »
Will test as soon as possible after the Easter break and let you know
Vera Lite UI7, Fibaro FGS-221, FGS-212, FGSS-001, FGK-101, FGWPE/F-101, FGMS-001, Aeon HEM G2, GreenWave PowerNode 6,  Everspring ST-814, SE-812, Swiid SwiidInter.
Raspberry Pi2 Raspbian w/ openLuup. AltUI, SV Thermostat, Virtual Switch, Weather (openWeather), System Monitor (openSysMon), HomeWave.

Offline logread

  • Full Member
  • ***
  • Posts: 214
  • Karma: +7/-1
Re: openLuup: Known working plugins
« Reply #12 on: March 29, 2016, 01:21:29 pm »
@Akbooer,

I tested the Smart VT plugin with your lastest openLuup development branch from GitHub. As expected the child to parent upward check now works fine with VeraBridge 2.0, but the issue with the variables declared in the I_ file being invisible to the code in the L_ file remains... I started looking into how the updated loader works (I am puzzled with that issue...) but for now I still cannot get the unmodified plugin to work.
Vera Lite UI7, Fibaro FGS-221, FGS-212, FGSS-001, FGK-101, FGWPE/F-101, FGMS-001, Aeon HEM G2, GreenWave PowerNode 6,  Everspring ST-814, SE-812, Swiid SwiidInter.
Raspberry Pi2 Raspbian w/ openLuup. AltUI, SV Thermostat, Virtual Switch, Weather (openWeather), System Monitor (openSysMon), HomeWave.

Offline explorer

  • Sr. Newbie
  • *
  • Posts: 22
  • Karma: +7/-0
Re: openLuup: Known working plugins
« Reply #13 on: April 16, 2016, 04:08:52 pm »
I have these working with openLuup:

original 
  • DataMine
  • DayTime
  • ImperiHomeDevice

adjusted
  • ISYController
  • Sonos
  • UPnPProxy

Offline amg0

  • Beta Testers
  • Master Member
  • *****
  • Posts: 3164
  • Karma: +209/-8
Re: openLuup: Known working plugins
« Reply #14 on: May 18, 2016, 05:22:10 pm »
You can add IPhoneLocator 2.34 to the list , it works fine on openLuup when directly installed on openLuup.

However there is a limitation if you access it from you VERA via VeraBridge. Since VeraBridge inserts itself as a parent for the "remote" device, IPhoneLocator proxied device "thinks" it is a child device ( as opposed to a device with no parent ).  So when trying to configure it in ALTUI, you will only see a subset of the configuration options. for instance you will not be able to configure the settings for iCloud/Polling parameters. The workaround in that case is that you configure it on the VERA itself.

But that is typically a device that should run on openLuup to freeup your vera from non zWave related stuff.
« Last Edit: May 18, 2016, 05:37:49 pm by amg0 »