We have moved at community.getvera.com

Author Topic: openLuup: Known working plugins  (Read 10007 times)

Offline NikV

  • Full Member
  • ***
  • Posts: 143
  • Karma: +2/-1
Re: openLuup: Known working plugins
« Reply #30 on: December 29, 2016, 01:04:43 pm »
yes the plugin is called "Magic Home Wifi LED Control" written by ceefin - jusr have to set the IP address in the plugin (after using the App to enable it to join the network)

from vera apps

Quote
Built to interact with Magic Home/Magic Light branded WiFi bulbs and the Magic UFO RGBW LED Controller, this plugin allows you device control from the app or via Luup code. This plugin was built and tested only for UI7. Documentation for applicable luup code can be found in the device detail page. If your device uses the Magic Home mobile app, it can be used with this plugin. Magic Home and Magic Light and related images are copyrighted to their respective owners. This company does not endorse nor provide support for this plugin.

Offline reneboer

  • Beta Testers
  • Hero Member
  • *****
  • Posts: 1574
  • Karma: +110/-31
Re: openLuup: Known working plugins
« Reply #31 on: January 06, 2017, 08:37:07 am »
Hi,

I added two plugins to the ALTUI App Store and both work om openLuup as well.

The FritzBox sensor that monitors your FritxBox modem and will trip when the Internet connection goes down. You can also see a set of parameters from your FritzBox line up time and line speeds.

The UPS Sensor can monitor the status of your UPS that is attached to a UPS server like a Synology NAS. This sensor will trip when there is a power outage or when the battery level becomes low.

Cheers Rene
2xVeraLite, VeraEdge, openLuup, ALTUI, 20 switches, 10 dimmers, 20 sensors, 10 scene controllers, 1 Harmony Hub, many plug-ins. Not enough time.

Offline CudaNet

  • Beta Testers
  • Hero Member
  • *****
  • Posts: 1401
  • Karma: +42/-11
  • Chimichanga !
Re: openLuup: Known working plugins
« Reply #32 on: January 06, 2017, 08:51:38 am »
Updated and thank you !

Hi,

I added two plugins to the ALTUI App Store and both work om openLuup as well.

The FritzBox sensor that monitors your FritxBox modem and will trip when the Internet connection goes down. You can also see a set of parameters from your FritzBox line up time and line speeds.

The UPS Sensor can monitor the status of your UPS that is attached to a UPS server like a Synology NAS. This sensor will trip when there is a power outage or when the battery level becomes low.

Cheers Rene
openLuup, AltUI, Zway and HomeWave, enough said...

Offline a-lurker

  • Hero Member
  • *****
  • Posts: 872
  • Karma: +66/-8
Re: openLuup: Known working plugins
« Reply #33 on: April 30, 2017, 11:50:48 pm »
DayTime plugin:
It's important to note that the "eventList2" events this plugin publishes in its D_DayTime.json file will not work.

As I understand it, openLuup does not support events as published in the json files. Not surprising as this methodology is highly suspect. openLuup's approach, is to just place a watch on variables of interest, using the watch editor in the AltUI scene creator. A far superior approach.

Would like to see the above mentioned in the openLuup documentation.

GC100 plugin:
Can be made to work - refer to:
http://forum.micasaverde.com/index.php/topic,37268.msg320919.html#msg320919

Yamaha-RX-HTTP:
As found in the "Alternate App Store" works.

DataMine2:
Yes it does work but requires manual intervention to set up.

OWserver:
Works - may need to fiddle with json lib file and location.
« Last Edit: May 01, 2017, 02:35:19 am by a-lurker »

Offline akbooer

  • Moderator
  • Master Member
  • *****
  • Posts: 6387
  • Karma: +290/-70
  • "Less is more"
Re: openLuup: Known working plugins
« Reply #34 on: May 01, 2017, 05:44:58 am »
@a-lurker

Thanks for this update. The list on post #1 of this thread has been updated.
Minor documentation changes have been included in the development branch 2017.05.01

« Last Edit: May 01, 2017, 06:14:28 am by akbooer »
3x Vera Lite-UI5/Edge-UI7, 25x Fibaro, 23x TKB, 9x MiniMote, 2x NorthQ Power, 2x Netatmo, 1x Foscam FI9831P, 9x Philips Hue,
Razberry, MySensors Arduino, HomeWave, AltUI, AltHue, DataYours, Grafana, openLuup, ZWay, ZeroBrane Studio.

Offline DesT

  • Sr. Member
  • ****
  • Posts: 364
  • Karma: +5/-1
Re: openLuup: Known working plugins
« Reply #35 on: August 08, 2017, 12:21:32 pm »
Anyone try to install the openSprinkler plugin directly in openLuup ?

I just try it, but I got nothing under Variable.
Vera Edge-UI7/Plus-UI7 (2), DSC Partition (5 ) + Zones Sensors(31), Nest thermostat (1) & Protect Fire/CO (3), GE Sw (8 ), GE Dimr (14), FGMS-001 (2), ZW100 (2), RZCS4 (1), AL-DSC11 (1), Aeon HEM 2nd Edition (1), Aeon SSE (5), YRD220-ZW (1), SONOS (6), MyQ Chamberlain (1)
PINE64/openLuup/ALTUI/Rules

Offline akbooer

  • Moderator
  • Master Member
  • *****
  • Posts: 6387
  • Karma: +290/-70
  • "Less is more"
Re: openLuup: Known working plugins
« Reply #36 on: August 08, 2017, 12:29:14 pm »
What does the Console web page under Scheduler > Startup Jobs tell you?  Or, indeed, the log file?



Edit:  If you're using the code from here (January, 2015): http://forum.micasaverde.com/index.php/topic,29977.msg212979.html#msg212979

...I note that it requires the file: /usr/lib/lua/akb-json.lua

Perhaps you don't have that in place?
« Last Edit: August 08, 2017, 12:33:59 pm by akbooer »
3x Vera Lite-UI5/Edge-UI7, 25x Fibaro, 23x TKB, 9x MiniMote, 2x NorthQ Power, 2x Netatmo, 1x Foscam FI9831P, 9x Philips Hue,
Razberry, MySensors Arduino, HomeWave, AltUI, AltHue, DataYours, Grafana, openLuup, ZWay, ZeroBrane Studio.

Offline DesT

  • Sr. Member
  • ****
  • Posts: 364
  • Karma: +5/-1
Re: openLuup: Known working plugins
« Reply #37 on: August 08, 2017, 12:31:49 pm »
Startup job nothing about this plugin and logs

Code: [Select]
2017-08-08 12:31:20.477   luup.create_device:: [20030] D_OpenSprinkler1.xml / X / D_OpenSprinkler1_UI7.json
2017-08-08 12:31:20.477   luup.create_device:: [20031] D_BinarySprinkler1_UI7.xml / X / D_BinarySprinkler1_UI7.json
2017-08-08 12:31:20.477   luup.create_device:: [20064] D_BinarySprinkler1_UI7.xml / X / D_BinarySprinkler1_UI7.json
2017-08-08 12:31:20.478   luup.create_device:: [20065] D_BinarySprinkler1_UI7.xml / X / D_BinarySprinkler1_UI7.json
2017-08-08 12:31:20.478   luup.create_device:: [20066] D_BinarySprinkler1_UI7.xml / X / D_BinarySprinkler1_UI7.json
2017-08-08 12:31:20.478   luup.create_device:: [20067] D_BinarySprinkler1_UI7.xml / X / D_BinarySprinkler1_UI7.json
2017-08-08 12:31:20.478   luup.create_device:: [20068] D_BinarySprinkler1_UI7.xml / X / D_BinarySprinkler1_UI7.json
2017-08-08 12:31:20.479   luup.create_device:: [20069] D_BinarySprinkler1_UI7.xml / X / D_BinarySprinkler1_UI7.json
2017-08-08 12:31:20.479   luup.create_device:: [20070] D_BinarySprinkler1_UI7.xml / X / D_BinarySprinkler1_UI7.json
2017-08-08 12:31:20.480   luup.create_device:: [20071] D_BinarySprinkler1_UI7.xml / X / D_BinarySprinkler1_UI7.json
2017-08-08 12:31:20.480   luup.create_device:: [20087] D_BinarySprinkler1_UI7.xml / X / D_BinarySprinkler1_UI7.json

EDIT:  I think I found out something.   In the code it's looking for /usr/lib/lua/akb-json, and under openLuup, this file doesn't exist.  So I copy this file into my openLuup install folder and modify the plugin file to change the path!  And it's loading the variable now ;)

EDIT2: Enable/disable works fine for the master device but the On/Off button on all child device is not present!

EDIT3: Working perfectly now ;)

AK: You can add it to the main list!  I also install the House Mode plugin and it's working fine too!
« Last Edit: August 08, 2017, 01:52:01 pm by DesT »
Vera Edge-UI7/Plus-UI7 (2), DSC Partition (5 ) + Zones Sensors(31), Nest thermostat (1) & Protect Fire/CO (3), GE Sw (8 ), GE Dimr (14), FGMS-001 (2), ZW100 (2), RZCS4 (1), AL-DSC11 (1), Aeon HEM 2nd Edition (1), Aeon SSE (5), YRD220-ZW (1), SONOS (6), MyQ Chamberlain (1)
PINE64/openLuup/ALTUI/Rules

Offline DesT

  • Sr. Member
  • ****
  • Posts: 364
  • Karma: +5/-1
Re: openLuup: Known working plugins
« Reply #38 on: August 08, 2017, 02:44:21 pm »
Trying to migrate MyQ pluygin for the chamberlain garage door opener...

Anyone already try ?
Vera Edge-UI7/Plus-UI7 (2), DSC Partition (5 ) + Zones Sensors(31), Nest thermostat (1) & Protect Fire/CO (3), GE Sw (8 ), GE Dimr (14), FGMS-001 (2), ZW100 (2), RZCS4 (1), AL-DSC11 (1), Aeon HEM 2nd Edition (1), Aeon SSE (5), YRD220-ZW (1), SONOS (6), MyQ Chamberlain (1)
PINE64/openLuup/ALTUI/Rules

Offline akbooer

  • Moderator
  • Master Member
  • *****
  • Posts: 6387
  • Karma: +290/-70
  • "Less is more"
Re: openLuup: Known working plugins
« Reply #39 on: August 08, 2017, 03:08:45 pm »
I think I found out something.   In the code it's looking for /usr/lib/lua/akb-json, and under openLuup, this file doesn't exist.  So I copy this file into my openLuup install folder and modify the plugin file to change the path!  And it's loading the variable now ;)

You don't need to copy the code, simply use "openLuup.json" instead.

Quote
You can add it to the main list!  I also install the House Mode plugin and it's working fine too!

Done.  Thanks.

However, there's no need for the HouseMode plugin in openLuup.  The openLuup plugin itself mirrors the House Mode with a variable which may be used to trigger scenes, etc.
3x Vera Lite-UI5/Edge-UI7, 25x Fibaro, 23x TKB, 9x MiniMote, 2x NorthQ Power, 2x Netatmo, 1x Foscam FI9831P, 9x Philips Hue,
Razberry, MySensors Arduino, HomeWave, AltUI, AltHue, DataYours, Grafana, openLuup, ZWay, ZeroBrane Studio.

Offline jswim788

  • Hero Member
  • *****
  • Posts: 809
  • Karma: +58/-2
Re: openLuup: Known working plugins
« Reply #40 on: September 17, 2017, 11:57:47 am »
I have found that the Combination Switch from @futzle also works under openLuup.  It's a little funky as the directions mention using the "save" button which doesn't exist with it under AltUI/openLuup, but the values are saved and it does work.  I did need to reload openLuup to get it up and running.

Offline akbooer

  • Moderator
  • Master Member
  • *****
  • Posts: 6387
  • Karma: +290/-70
  • "Less is more"
Re: openLuup: Known working plugins
« Reply #41 on: September 17, 2017, 12:32:20 pm »
I have found that the Combination Switch from @futzle also works under openLuup.

Thanks... noted!
3x Vera Lite-UI5/Edge-UI7, 25x Fibaro, 23x TKB, 9x MiniMote, 2x NorthQ Power, 2x Netatmo, 1x Foscam FI9831P, 9x Philips Hue,
Razberry, MySensors Arduino, HomeWave, AltUI, AltHue, DataYours, Grafana, openLuup, ZWay, ZeroBrane Studio.

Offline DesT

  • Sr. Member
  • ****
  • Posts: 364
  • Karma: +5/-1
Re: openLuup: Known working plugins
« Reply #42 on: November 21, 2017, 12:39:55 pm »
I confirm that MyQ plugin for garage door is working also under openLuup.  Need a little modification in L_MyQGateway.lua  to add the line:

Code: [Select]
local ltn12 = require "ltn12"
Vera Edge-UI7/Plus-UI7 (2), DSC Partition (5 ) + Zones Sensors(31), Nest thermostat (1) & Protect Fire/CO (3), GE Sw (8 ), GE Dimr (14), FGMS-001 (2), ZW100 (2), RZCS4 (1), AL-DSC11 (1), Aeon HEM 2nd Edition (1), Aeon SSE (5), YRD220-ZW (1), SONOS (6), MyQ Chamberlain (1)
PINE64/openLuup/ALTUI/Rules

Offline rafale77

  • Community Beta
  • Hero Member
  • ******
  • Posts: 1749
  • Karma: +101/-27
  • HA ≠ IoT as a blue sky is cloudless.
Re: openLuup: Known working plugins
« Reply #43 on: December 04, 2017, 08:51:08 pm »
I just tested RigPapa's Deus Ex Machina II and it can be added to the list.
openLuup (79 devices, 141 scenes, 19 apps) master to VeraPlus (142 zwave nodes, 8 Zigbee nodes, 221 devices,  20 scenes , 2 apps) +  Hubitat (15 Zigbee nodes) + Home-Assistant (API Integrations). Bridged to Siri and Alexa. Homewave. VeraPlus ExtRooted and mios server independent.

Offline akbooer

  • Moderator
  • Master Member
  • *****
  • Posts: 6387
  • Karma: +290/-70
  • "Less is more"
Re: openLuup: Known working plugins
« Reply #44 on: December 05, 2017, 01:21:02 pm »
I see that @CudaNet has already added it!
3x Vera Lite-UI5/Edge-UI7, 25x Fibaro, 23x TKB, 9x MiniMote, 2x NorthQ Power, 2x Netatmo, 1x Foscam FI9831P, 9x Philips Hue,
Razberry, MySensors Arduino, HomeWave, AltUI, AltHue, DataYours, Grafana, openLuup, ZWay, ZeroBrane Studio.