Author Topic: Keen Smart Vent  (Read 4393 times)

Offline bohemian

  • Sr. Newbie
  • *
  • Posts: 41
  • Karma: +0/-0
Re: Keen Smart Vent
« Reply #30 on: August 15, 2017, 11:58:59 am »
The only other residual weirdness I'm seeing is that Vera seems to think that my Keen Vent 'Window Coverings' are in fact smoke sensors. At least when I view devices by type. Doesn't impact anything but sure looks odd.
VeraPlus, Ecobee, Legrand Adorne and too many Z-Wave devices to name

Offline rafale77

  • Hero Member
  • *****
  • Posts: 690
  • Karma: +35/-20
Re: Keen Smart Vent
« Reply #31 on: August 15, 2017, 07:10:42 pm »
I am not and have never seen this. Are you sure you have your device category and subcategory set correctly?
127 zwave nodes, 8 zigbee nodes, 256 devices, 17 apps, 128 scenes on a Vera Plus linked with Echo and HomeKit through bridges

Offline bohemian

  • Sr. Newbie
  • *
  • Posts: 41
  • Karma: +0/-0
Re: Keen Smart Vent
« Reply #32 on: August 15, 2017, 08:21:57 pm »
device_type = urn:schemas-micasaverde-com:device:WindowCovering:1
device_file = D_WindowCovering1.xml
device_JSON = D_WindowCovering1.json


So, nothing jumps out as 'Smoke Sensor' to me.
VeraPlus, Ecobee, Legrand Adorne and too many Z-Wave devices to name

Offline Don Phillips

  • Hero Member
  • *****
  • Posts: 797
  • Karma: +18/-7
    • Worthington Engineering, Inc.
Re: Keen Smart Vent
« Reply #33 on: August 16, 2017, 09:19:24 pm »
You have to look at the advanced properties of the device: http://wiki.micasaverde.com/index.php/Luup_Device_Categories
Vera 3, UI7 1.7.947, CT101 t-stat, Everspring motion detector, GE/Jasco switch, Leviton outlet, AeonLabs door sensor, Insteon garage control, Blue Iris, Sricam SP011, iPhone locator, APCUPSD, VeraMate, VeraAlerts, PLEG, House Modes, Countdown Timer, DVR, Virtual & Multi Switch, Weather, Sys. Mon.

Offline bohemian

  • Sr. Newbie
  • *
  • Posts: 41
  • Karma: +0/-0
Re: Keen Smart Vent
« Reply #34 on: August 16, 2017, 09:46:25 pm »
You have to look at the advanced properties of the device: http://wiki.micasaverde.com/index.php/Luup_Device_Categories

Yeah, category_num and subcategory_num were both set to 4 for all vents. Odd, since I didn't set them manually.
Changed them to match the respective window covering categories for what it was worth. Thanks for the pointer.
VeraPlus, Ecobee, Legrand Adorne and too many Z-Wave devices to name

Offline Teken

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Re: Keen Smart Vent
« Reply #35 on: August 17, 2017, 03:02:23 pm »
For those having used these automated vents. Would you purchase them again? Any pros and cons of these vents not already listed in this thread?


Sent from my iPhone using Tapatalk

Offline bohemian

  • Sr. Newbie
  • *
  • Posts: 41
  • Karma: +0/-0
Re: Keen Smart Vent
« Reply #36 on: August 24, 2017, 04:01:42 pm »
For those having used these automated vents. Would you purchase them again?

I would purchase them again. Keep in mind that I'm solving a very specific problem - vents working with my Ecobee to send more airflow to our small second floor for pre-bed cooling / heating. Other than that, I'm not getting too sophisticated.

Once set up, the seem to work well although it would nice if we could get battery access to things like battery level and other Keen Vent variables. So, a specific Keen device for Vera, rather than 'tricking' Vera into thinking these are window blinds. That's less on  the vents than it is some smart Vera developer though.
VeraPlus, Ecobee, Legrand Adorne and too many Z-Wave devices to name

Offline jadragescu

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
Re: Keen Smart Vent
« Reply #37 on: September 05, 2017, 05:12:59 pm »
Has anyone had a problem pairing more than 6 - 8 vents (like the forum link below)?  I had no problem pairing 5 of these vents, but after that, VeraPlus would not add anymore.  Vera support had no clue, and mentioned this forum and just said that they don't support this keen vent on there website.  :(

I did a work around with Wink 2 hub, and its plugin, but I personally don't like that solution as it isn't that seamless, and there is a delay of course.  Lastly, whats the point of VeraPlus Zigbee controller then?....

Any thoughts/help?  It would be greatly appreciated!

http://forum.micasaverde.com/index.php/topic,49059.msg321957.html#msg321957

Offline bohemian

  • Sr. Newbie
  • *
  • Posts: 41
  • Karma: +0/-0
Re: Keen Smart Vent
« Reply #38 on: September 05, 2017, 05:52:27 pm »
I'm running exactly 5 vents right now and they work fine.

I'll be adding a couple more when they start shipping again and will update this thread with the results. I was originally going to go the Wink route, but had trouble getting it to work with my VeraPlus.
VeraPlus, Ecobee, Legrand Adorne and too many Z-Wave devices to name

Offline rafale77

  • Hero Member
  • *****
  • Posts: 690
  • Karma: +35/-20
Re: Keen Smart Vent
« Reply #39 on: September 06, 2017, 02:02:52 am »
I am running 6 of these and have not had any issues. I did read somewhere of a strange limitation to 8 zigbee device though but never observed it myself.
127 zwave nodes, 8 zigbee nodes, 256 devices, 17 apps, 128 scenes on a Vera Plus linked with Echo and HomeKit through bridges

Offline jadragescu

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
Re: Keen Smart Vent
« Reply #40 on: September 07, 2017, 08:28:40 pm »
Can you tell me what your Zigbee channel you use perhaps?  I am not to familiar with Zigbee (veraPlus/settings) and how to tweek it/etc.

Mine stop pairing/including after 6 vents, so please beware (if your getting more than 6 or so.  I have a total of 16 of these vents, and would love to just use Vera, but forced to use Wink because of this limitation.

If you have any news on this, that would be great. 

I asked Vera support to see what they could do to help, unfortunately they mentioned they don't officially support this device, and pointed me to this forum.  :(

Unfortunate that Smartthings and Wink and Iris support this device fully, but not Vera thus far (without limitation).

Cheers!


Offline rafale77

  • Hero Member
  • *****
  • Posts: 690
  • Karma: +35/-20
Re: Keen Smart Vent
« Reply #41 on: September 08, 2017, 01:43:24 am »
Well I added my 9th Zigbee device tonight and it appears to work just fine so I am not seeing any limitations. I also have 6 keen vents and did add a 7th one at some point I did not see any problem at that time as I was thinking the limitation was at 8.
127 zwave nodes, 8 zigbee nodes, 256 devices, 17 apps, 128 scenes on a Vera Plus linked with Echo and HomeKit through bridges

Offline jadragescu

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
Re: Keen Smart Vent
« Reply #42 on: September 08, 2017, 05:32:41 pm »
Thank you for your feedback.  I don't believe the limitation is with other zigbee devices.  So you can have several other devices paired/included.  The limitation is on these vents.  I believe my limitation was 6, only because I had 2 other Keen vents paired/included before, but had issues with them, so I excluded them.  I am guessing, those 2 still have residual in my Vera controller (even if excluded), hence that I only have 6 included.  :(

I will try to perhaps exclude them all and try again from scratch.  I am afraid that if I exclude them, I won't be able to add anymore (from above analysis).  This just boggles my mind, why/how a limitation would even be such a thing on a controller (unless lack of memory on unit/etc).

Any other help here, would be greatly appreciated.

Thanks again!