We have moved at community.getvera.com

Author Topic: Autelis Control?  (Read 48857 times)

Offline Sammy2

  • Hero Member
  • *****
  • Posts: 904
  • Karma: +5/-5
Re: Autelis Control?
« Reply #285 on: September 07, 2016, 08:41:52 pm »
Did you get your port number changed?

I'll try that  tomorrow morning.

Offline Sammy2

  • Hero Member
  • *****
  • Posts: 904
  • Karma: +5/-5
Re: Autelis Control?
« Reply #286 on: September 08, 2016, 12:09:27 pm »
Did you get your port number changed?

I'll try that  tomorrow morning.

This morning and last night was a wash on this. Maybe tomorrow!

I figured out how the booster pump was coming on.. those notifications let me nail it down! When switching from "home" to "away" mode it came on and sent me the notification. I checked My Modes and found that, for whatever reason, it was set to come on when switching modes. I set it to "No Change" in My Modes.. Problem solved.

Offline rstrouse

  • Hero Member
  • *****
  • Posts: 842
  • Karma: +30/-9
Re: Autelis Control?
« Reply #287 on: September 10, 2016, 06:08:25 pm »
Guys here is a new Beta.  There is quite a lot of cleanup on the code.

  • Fixed polling issues:  Essentially the plugin polling would get longer between each poll until it effectively wasn't polling anymore.
  • Added detection for advanced firmware: Options not available for the specific firmware version of your Aqualink panel are no longer shown.  This should eliminate selections for hardware that is not supported.
  • UI5 Json fixes: Many of the static json files did not contain the correct positioning and required attributes.  Effort has been placed to get these files so the properly support UI5.

You know the drill.  Do not uninstall the plugin if you have it installed, simply copy the contents of the package to overwrite the files on you Vera.
1xVera3 1.7.619, 4xLinear WT00Z, 3xLinear WS15Z, 1xLeviton VRCZ4, 10xCooper RF9540, 1xLeviton VRFI10, 1xLeviton VP00R, 2xLinear GD00Z-4, 1xGE/Jasco 45612, 1xGE/Jasco 45610,  4xGE/Jasco 45605, 2xYale YRD220-ZW-619, 1xCaddx NX584, Autelis Intellitouch Pool Control, OpenSprinkler

Offline Sammy2

  • Hero Member
  • *****
  • Posts: 904
  • Karma: +5/-5
Re: Autelis Control?
« Reply #288 on: September 11, 2016, 04:12:29 pm »
Guys here is a new Beta.  There is quite a lot of cleanup on the code.

  • Fixed polling issues:  Essentially the plugin polling would get longer between each poll until it effectively wasn't polling anymore.
  • Added detection for advanced firmware: Options not available for the specific firmware version of your Aqualink panel are no longer shown.  This should eliminate selections for hardware that is not supported.
  • UI5 Json fixes: Many of the static json files did not contain the correct positioning and required attributes.  Effort has been placed to get these files so the properly support UI5.

You know the drill.  Do not uninstall the plugin if you have it installed, simply copy the contents of the package to overwrite the files on you Vera.

Installing now. I finally got my lights sorted out with replacement LED's. Two tries from amazon were the wrong length bulb to fit in the fixture. I finally got these from Home Depot. They cost a bit more but it was worth it. I still needed to replace the screw holding the dichroic assemble to the bulb base with longer ones but it was only needing to be a few hundredths longer, merely to get the screw engaged into the stand off as the included screw was about the least size possible to get the assembly together.
« Last Edit: September 11, 2016, 04:49:00 pm by Sammy2 »

Offline Sammy2

  • Hero Member
  • *****
  • Posts: 904
  • Karma: +5/-5
Re: Autelis Control?
« Reply #289 on: September 11, 2016, 05:43:34 pm »
Upon installing I had to re-enable Pool and Spa Heat and then these devices showed up in "No Room" rather than in the room I have labeled "Pool". IIR, this happened on the last beta update too. Not a deal breaker for sure but something to look into maybe but then again not really worth spending a lot of time troubleshooting either.

Offline rstrouse

  • Hero Member
  • *****
  • Posts: 842
  • Karma: +30/-9
Re: Autelis Control?
« Reply #290 on: September 14, 2016, 12:17:56 pm »
Here is .40 the most notable thing in this version are separate handling of UI5 static json files.  Also included are performance enhancements and general code cleanup.

BTW: I added an option to keep the equipment together in the same room as the parent.  It's under the config tab.
« Last Edit: September 14, 2016, 03:58:46 pm by rstrouse »
1xVera3 1.7.619, 4xLinear WT00Z, 3xLinear WS15Z, 1xLeviton VRCZ4, 10xCooper RF9540, 1xLeviton VRFI10, 1xLeviton VP00R, 2xLinear GD00Z-4, 1xGE/Jasco 45612, 1xGE/Jasco 45610,  4xGE/Jasco 45605, 2xYale YRD220-ZW-619, 1xCaddx NX584, Autelis Intellitouch Pool Control, OpenSprinkler

Offline Sammy2

  • Hero Member
  • *****
  • Posts: 904
  • Karma: +5/-5
Re: Autelis Control?
« Reply #291 on: September 14, 2016, 12:38:00 pm »
Here is .40 the most notable thing in this version are separate handling of UI5 static json files.  Also included are performance enhancements and general code cleanup.

I'm headed out of town for a few days tomorrow. I don't know if I'll have time to test this or not before leaving but probably will squeeze it in tomorrow morning.

BTW, I still haven't had time to mess with changing the port on the Autelis from 80 to something else because it is down the list of priorities even though I do not like devices on the default port because they are too easily accessible to the world.

Offline rstrouse

  • Hero Member
  • *****
  • Posts: 842
  • Karma: +30/-9
Re: Autelis Control?
« Reply #292 on: September 17, 2016, 01:03:08 pm »
@mda,

Here are the UI5 only files.  This only affects you if you are running UI5.
« Last Edit: September 17, 2016, 08:49:03 pm by rstrouse »
1xVera3 1.7.619, 4xLinear WT00Z, 3xLinear WS15Z, 1xLeviton VRCZ4, 10xCooper RF9540, 1xLeviton VRFI10, 1xLeviton VP00R, 2xLinear GD00Z-4, 1xGE/Jasco 45612, 1xGE/Jasco 45610,  4xGE/Jasco 45605, 2xYale YRD220-ZW-619, 1xCaddx NX584, Autelis Intellitouch Pool Control, OpenSprinkler

Offline rstrouse

  • Hero Member
  • *****
  • Posts: 842
  • Karma: +30/-9
Re: Autelis Control?
« Reply #293 on: September 18, 2016, 10:57:12 pm »
Alright here is the .41 Beta we are horning in on a release.  We have some minor issues with positioning on UI5.  Changes to the chlorinator setpoint reporting and some tweaks to the control positioning in the detail panels for both UI versions.
1xVera3 1.7.619, 4xLinear WT00Z, 3xLinear WS15Z, 1xLeviton VRCZ4, 10xCooper RF9540, 1xLeviton VRFI10, 1xLeviton VP00R, 2xLinear GD00Z-4, 1xGE/Jasco 45612, 1xGE/Jasco 45610,  4xGE/Jasco 45605, 2xYale YRD220-ZW-619, 1xCaddx NX584, Autelis Intellitouch Pool Control, OpenSprinkler

Offline mda

  • Sr. Member
  • ****
  • Posts: 464
  • Karma: +9/-0
Re: Autelis Control?
« Reply #294 on: September 19, 2016, 03:04:46 pm »
Alright here is the .41 Beta we are horning in on a release.  We have some minor issues with positioning on UI5.  Changes to the chlorinator setpoint reporting and some tweaks to the control positioning in the detail panels for both UI versions.

.41 is looking good on UI5 !

Offline rstrouse

  • Hero Member
  • *****
  • Posts: 842
  • Karma: +30/-9
Re: Autelis Control?
« Reply #295 on: September 19, 2016, 10:59:12 pm »
And again v.42 Beta.  This adds more polish to the configuration pages, fixes UI5 positioning woes and adds some additional performance tweaks.  Check it out and let me know.
1xVera3 1.7.619, 4xLinear WT00Z, 3xLinear WS15Z, 1xLeviton VRCZ4, 10xCooper RF9540, 1xLeviton VRFI10, 1xLeviton VP00R, 2xLinear GD00Z-4, 1xGE/Jasco 45612, 1xGE/Jasco 45610,  4xGE/Jasco 45605, 2xYale YRD220-ZW-619, 1xCaddx NX584, Autelis Intellitouch Pool Control, OpenSprinkler

Offline Sammy2

  • Hero Member
  • *****
  • Posts: 904
  • Karma: +5/-5
Re: Autelis Control?
« Reply #296 on: September 20, 2016, 12:47:57 pm »
Maybe tomorrow I will test this. Should I install the intermediate betas that I missed or just jump ahead to 0.42?

Offline rstrouse

  • Hero Member
  • *****
  • Posts: 842
  • Karma: +30/-9
Re: Autelis Control?
« Reply #297 on: September 20, 2016, 02:28:16 pm »
Maybe tomorrow I will test this. Should I install the intermediate betas that I missed or just jump ahead to 0.42?

Sammy, Just install .42
1xVera3 1.7.619, 4xLinear WT00Z, 3xLinear WS15Z, 1xLeviton VRCZ4, 10xCooper RF9540, 1xLeviton VRFI10, 1xLeviton VP00R, 2xLinear GD00Z-4, 1xGE/Jasco 45612, 1xGE/Jasco 45610,  4xGE/Jasco 45605, 2xYale YRD220-ZW-619, 1xCaddx NX584, Autelis Intellitouch Pool Control, OpenSprinkler

Offline Sammy2

  • Hero Member
  • *****
  • Posts: 904
  • Karma: +5/-5
Re: Autelis Control?
« Reply #298 on: September 22, 2016, 08:11:54 pm »
Maybe tomorrow I will test this. Should I install the intermediate betas that I missed or just jump ahead to 0.42?

Sammy, Just install .42

Still haven't had a chance to install this beta. Will shoot for this weekend.

Offline Sammy2

  • Hero Member
  • *****
  • Posts: 904
  • Karma: +5/-5
Re: Autelis Control?
« Reply #299 on: September 27, 2016, 10:09:37 am »
Maybe tomorrow I will test this. Should I install the intermediate betas that I missed or just jump ahead to 0.42?

Sammy, Just install .42

Still haven't had a chance to install this beta. Will shoot for this weekend.

I did get this installed last Friday but was out of town for a few days again. I see that all is well with it, AFAIK but I did have to go through my pool related scenes again to get them to work. I noticed also that the reversed color scheme for the Macros (which I label in my Vera UI as "One-Touch Controls" has been fixed now also. Nice work!!

I can control the individual colors on my lights using the Keypad Emulator in the Autelis Web GUI / app, BTW, but apparently this functionality cannot be accessed in any other way that is open to Vera.

Thank you very much for taking the time to put this together.