Author Topic: Aeotec Smart Switch 6  (Read 739 times)

Offline OxxyMorons

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Aeotec Smart Switch 6
« on: August 17, 2016, 02:20:31 pm »
I have a scene that looks at the smart energy switch my washer is connected to. Whenever the washer completed, i.e. the consumtions falls below 5 watts, it sends me a TTS via imperihome saying "your clothes are washed". But: if my washer washes the laundry, it seems to stop several times and the consumtion drops each time below 5 watts, alway triggering the TTS... if that happend 3 to 5 times (depending on the chosen program) the washer is ready.
So here is my question: how can i trigger the scene if the consumtion falls below 5 watts for at least 10 minutes? (the gaps in consumption are mostly 5 to 7 minutes, definetively not longer than 10min)

Thanks a lot in advance!

OxxyMorons