Author Topic: Vera plus UI7 ask for credentials (not accepting)  (Read 2648 times)

Offline Corpze

  • Newbie
  • *
  • Posts: 15
  • Karma: +0/-0
Vera plus UI7 ask for credentials (not accepting)
« on: August 21, 2016, 04:45:05 am »
Hi, i am trying to add a generic IP Camera, a Wanscam NCM630W and after adding the forms like this;

http://192.168.1.102/snapshot.cgi
Username
Password

- i hit the "Test" button and is getting prompted to add the Username and password for my Vera Plus controller, filling in theese forms is getting nowhere, i am just getting promted witth the credential form again, and again, just like the credentials is wrong (i have tripple checked the credentials)

And also, the snapshot adress is indeed not the right one for this camera, (uses an http adress) - the info on ispy says that i must use a RTSP-adress, but does Vera supports those adresses?

/Daniel

Offline wanscamroyan

  • Newbie
  • *
  • Posts: 8
  • Karma: +0/-0
Re: Vera plus UI7 ask for credentials (not accepting)
« Reply #1 on: September 06, 2016, 08:46:17 pm »
Hello, Mr Corpze,
How are you doing?

This is Royan from Wanscam, a professional manufacturer of IP camera.

As for your problem, please contact me by the below contact information, I'd like to give you a hand.
My e-mail address: sales06@wanscam.com
     Skype ID: wanscam006
    Whatsapp: +8613510806209

Best Regards,
Royan

Offline M2MExpert

  • Jr. Member
  • **
  • Posts: 93
  • Karma: +0/-0
Re: Vera plus UI7 ask for credentials (not accepting)
« Reply #2 on: November 28, 2016, 08:20:17 pm »
Did you get this resolved? I am having the same issue.




Hi, i am trying to add a generic IP Camera, a Wanscam NCM630W and after adding the forms like this;

http://192.168.1.102/snapshot.cgi
Username
Password

- i hit the "Test" button and is getting prompted to add the Username and password for my Vera Plus controller, filling in theese forms is getting nowhere, i am just getting promted witth the credential form again, and again, just like the credentials is wrong (i have tripple checked the credentials)

And also, the snapshot adress is indeed not the right one for this camera, (uses an http adress) - the info on ispy says that i must use a RTSP-adress, but does Vera supports those adresses?

/Daniel
- M2MExpert
Machine to Machine Communications Specialist

Offline Corpze

  • Newbie
  • *
  • Posts: 15
  • Karma: +0/-0
Re: Vera plus UI7 ask for credentials (not accepting)
« Reply #3 on: December 06, 2016, 11:34:13 am »
Nope, tried yesterday and Vera is still asking for credentials, even with the latest fw that is supposed to have support for much more 3rd party cameras :/

Offline zedrally

  • Hero Member
  • *****
  • Posts: 861
  • Karma: +1/-0
  • Black Cat Controllers & Control Systems
    • Black Cat Control Systems
Re: Vera plus UI7 ask for credentials (not accepting)
« Reply #4 on: December 06, 2016, 05:40:19 pm »
Not sure if the problem is in Vera, Blue Iris or the Camera.
In this case I have successfully added the IP Camera (NEO NIP61) to the network and to Blue Iris. Great control and very happy with BI itself, but.....
The Blue Iris plugin returns Invalid Camera URL. One possible problem may be that I am using the trial version of BI, but I can't be sure.  ???


Is there anyone successfully using this plugin in UI7 with any IP Camera that can confirm either way before I purchase the BI  Software.?

Living in the Land of Oz, give me a vegemite sandwich. Home Seer, Vera Lite & Edge, Popp, Black Cat Smart Hub & Vera G, Black Cat Lite 1 & 2's a Black Cat Dimmer or 2, then some  Black Cat Cat's Eye PIR's & Door-Window Sensors plus a Z-UNO or 2.

Offline Don Phillips

  • Hero Member
  • *****
  • Posts: 900
  • Karma: +18/-18
    • Worthington Engineering, Inc.
Re: Vera plus UI7 ask for credentials (not accepting)
« Reply #5 on: December 06, 2016, 08:02:39 pm »
Blue Iris works well.  You can read their manuals to figure out how to set up it up in Vera.  I also suggest the DVR plug-in if you have multiple camera.
Vera 3, UI7 1.7.947, CT101 t-stat, Everspring motion detector, GE/Jasco switch, Leviton outlet, AeonLabs door sensor, Insteon garage control, Blue Iris, Sricam SP011, iPhone locator, APCUPSD, VeraMate, VeraAlerts, PLEG, House Modes, Countdown Timer, DVR, Virtual & Multi Switch, Weather, Sys. Mon.

Offline zedrally

  • Hero Member
  • *****
  • Posts: 861
  • Karma: +1/-0
  • Black Cat Controllers & Control Systems
    • Black Cat Control Systems
Re: Vera plus UI7 ask for credentials (not accepting)
« Reply #6 on: December 06, 2016, 08:17:56 pm »
Thanks, but which version are you using, Trial or Full?

Living in the Land of Oz, give me a vegemite sandwich. Home Seer, Vera Lite & Edge, Popp, Black Cat Smart Hub & Vera G, Black Cat Lite 1 & 2's a Black Cat Dimmer or 2, then some  Black Cat Cat's Eye PIR's & Door-Window Sensors plus a Z-UNO or 2.

Offline Don Phillips

  • Hero Member
  • *****
  • Posts: 900
  • Karma: +18/-18
    • Worthington Engineering, Inc.
Re: Vera plus UI7 ask for credentials (not accepting)
« Reply #7 on: December 06, 2016, 08:26:01 pm »
I am using full because I have 4 cameras.  The trial works for 1 camera.
Vera 3, UI7 1.7.947, CT101 t-stat, Everspring motion detector, GE/Jasco switch, Leviton outlet, AeonLabs door sensor, Insteon garage control, Blue Iris, Sricam SP011, iPhone locator, APCUPSD, VeraMate, VeraAlerts, PLEG, House Modes, Countdown Timer, DVR, Virtual & Multi Switch, Weather, Sys. Mon.

Offline zedrally

  • Hero Member
  • *****
  • Posts: 861
  • Karma: +1/-0
  • Black Cat Controllers & Control Systems
    • Black Cat Control Systems
Re: Vera plus UI7 ask for credentials (not accepting)
« Reply #8 on: December 06, 2016, 08:28:43 pm »
Thank you, was there much fiddling with this or do the instructions provide a clear & quick resolution to the problem?
Living in the Land of Oz, give me a vegemite sandwich. Home Seer, Vera Lite & Edge, Popp, Black Cat Smart Hub & Vera G, Black Cat Lite 1 & 2's a Black Cat Dimmer or 2, then some  Black Cat Cat's Eye PIR's & Door-Window Sensors plus a Z-UNO or 2.

Offline Corpze

  • Newbie
  • *
  • Posts: 15
  • Karma: +0/-0
Re: Vera plus UI7 ask for credentials (not accepting)
« Reply #9 on: December 07, 2016, 02:06:37 pm »
What is Blue Iris? Something that i have missed when trying to add my Wanscam?

/

Offline integlikewhoa

  • Master Member
  • *******
  • Posts: 5585
  • Karma: +152/-368
Re: Vera plus UI7 ask for credentials (not accepting)
« Reply #10 on: December 07, 2016, 04:33:25 pm »
What is Blue Iris? Something that i have missed when trying to add my Wanscam?

/

Blueiris is software that you run on windows (PC) and it turns your computer into a very powerful DVR to record and control all your IP cameras. It has motion options and many options that most DVR don't have. There is a plugin for vera and many other home controllers and blueiris plays nice in that it can have many cameras, many different motion control setting for home or away night or day or what ever you choose. It can trip virtual motion sensors in vera based off motion detection from a camera and many other things.

http://blueirissoftware.com/

You can download for free from their website (also has a trail) and you can buy a license for as low as around 45-48.00 if you search the internet. It does require a good computer to run several cameras. Any old computer will not work as blueiris can hog CPU% up in a hurry.  There is a plugin for vera and many other hoem controllers and blueiris plays nice in that it can have many cameras, many different motion control setting for home or away night or day or what ever you choose. It can trip virtual motion sensors in vera based off motion detection from a camera and many other things.

Offline Nameless

  • Jr. Member
  • **
  • Posts: 94
  • Karma: +2/-0
Re: Vera plus UI7 ask for credentials (not accepting)
« Reply #11 on: December 08, 2016, 01:48:21 pm »
Blue Iris is a separate software for cams. Search it out on the internet and you can download a trial from their website.

*Yep, didn't see the other reply already in place.

Sent from my LGUS992 using Tapatalk

Offline Don Phillips

  • Hero Member
  • *****
  • Posts: 900
  • Karma: +18/-18
    • Worthington Engineering, Inc.
Re: Vera plus UI7 ask for credentials (not accepting)
« Reply #12 on: December 08, 2016, 09:25:25 pm »
Thank you, was there much fiddling with this or do the instructions provide a clear & quick resolution to the problem?

It took fiddling on my part because I just jump in and play/experiment but read the manual as I run into a wall  ;D
Vera 3, UI7 1.7.947, CT101 t-stat, Everspring motion detector, GE/Jasco switch, Leviton outlet, AeonLabs door sensor, Insteon garage control, Blue Iris, Sricam SP011, iPhone locator, APCUPSD, VeraMate, VeraAlerts, PLEG, House Modes, Countdown Timer, DVR, Virtual & Multi Switch, Weather, Sys. Mon.

Offline Corpze

  • Newbie
  • *
  • Posts: 15
  • Karma: +0/-0
Re: Vera plus UI7 ask for credentials (not accepting)
« Reply #13 on: December 10, 2016, 01:36:24 am »
Thanks for clearing out what Blue Iris is, but to clearify - i am not interested of running a computer, i wan't direct connection to Vera.

I have sent an email to wanscamroyan as well, but have not recieved any answer yet.

i have also upgraded the fw in my Vera plus controller to the latest beta, which should support more 3rd party cameras, but i can't see any difference in the "Add camera page"

I am thinking of getting an outdoor dome camera - is HIKvision supported?

Offline integlikewhoa

  • Master Member
  • *******
  • Posts: 5585
  • Karma: +152/-368
Re: Vera plus UI7 ask for credentials (not accepting)
« Reply #14 on: December 10, 2016, 10:45:23 am »
Thanks for clearing out what Blue Iris is, but to clearify - i am not interested of running a computer, i wan't direct connection to Vera.

I have sent an email to wanscamroyan as well, but have not recieved any answer yet.

i have also upgraded the fw in my Vera plus controller to the latest beta, which should support more 3rd party cameras, but i can't see any difference in the "Add camera page"

I am thinking of getting an outdoor dome camera - is HIKvision supported?

Depends on what you considered supported. Vera is not a DVR nor does it do much with the cameras. You can stream the cameras in a better resolution if you go direct from mobile device to camera vs threw vera. Using a PIR in the camera (if your modle has it) or having the camera trigger VERA for motion directly isn't supported. Recording to a vera isn't supported altho there is some inscure vera cloud storage options.

It's probley easier to tell us what you want to do with the camera in vera and we can tell you if that's possible. But most people use some type of external DVR since vera can't do much.