Author Topic: Aeon Multisensor 6: high temperature  (Read 670 times)

Offline wlasagne

  • Newbie
  • *
  • Posts: 10
  • Karma: +0/-0
Aeon Multisensor 6: high temperature
« on: September 23, 2016, 10:24:28 am »
Hi,
I'm using VeraPlus IU7 (7.0.17) and I connected in my zwave network a multisensor 6.
Everything OK but the temperature value is 76?C (the real temperature is around 22?C)
I tried to calibrate but Max +/- 10?C.
Any idea or suggestion?
thank a lot


Offline RichardTSchaefer

  • Master Member
  • *******
  • Posts: 9720
  • Karma: +737/-136
    • RTS Services Plugins
Re: Aeon Multisensor 6: high temperature
« Reply #1 on: September 23, 2016, 11:11:04 am »
Looks like it's in degF

Offline wlasagne

  • Newbie
  • *
  • Posts: 10
  • Karma: +0/-0
Re: Aeon Multisensor 6: high temperature
« Reply #2 on: September 23, 2016, 02:08:50 pm »
Normally the European multisensor should be in Celsius.
The US in Fahrenheit (also different frequency)

I did not find any options.

Offline wlasagne

  • Newbie
  • *
  • Posts: 10
  • Karma: +0/-0
Re: Aeon Multisensor 6: high temperature
« Reply #3 on: September 23, 2016, 03:06:40 pm »
Solved  :)
I changed the Unit Settings to Fahrenheit and then back to Celsius.
After 15/30 minutes the value was OK!!

thanks

Offline romolos

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: Aeon Multisensor 6: high temperature
« Reply #4 on: November 04, 2017, 07:13:09 am »
The same problem and same solution!
Thanks