Author Topic: New device support request (Kerui Door Sensor)  (Read 1009 times)

Offline hyzteric

  • Jr. Member
  • **
  • Posts: 71
  • Karma: +0/-1
New device support request (Kerui Door Sensor)
« on: December 13, 2016, 06:09:33 am »
Hi there,
I just got a Kerui Door Sensor that is not recognised.
It's using Lighting4 subtype PT2262.
Would it be possible to add it?

Here are the log messages I got when using it :

Door open :
02   12/13/16 11:57:59.210   luup_log:11: RFXtrx: warning: Decoding not yet implemented for message 09 13 00 09 C9 E6 2E 01 40 70  <0x6edd9520>

Door closed :
02   12/13/16 12:00:07.268   luup_log:11: RFXtrx: warning: Decoding not yet implemented for message 09 13 00 0A C9 E6 27 01 40 70  <0x6edd9520>

Device tamper :
02   12/13/16 12:02:14.141   luup_log:11: RFXtrx: warning: Decoding not yet implemented for message 09 13 00 0B C9 E6 2B 01 3D 80  <0x6edd9520>


Hope it helps adding those new devices.
You can buy it here btw : https://goo.gl/RMjBTy

Thanks in advance! :)
Michel



Offline hyzteric

  • Jr. Member
  • **
  • Posts: 71
  • Karma: +0/-1
Re: New device support request (Kerui Door Sensor)
« Reply #1 on: December 18, 2016, 12:17:55 pm »
So I flashed my rfxtrx433e in the latest EXT2 firmware release (1012) and it is recognised as X10 and immediately added :)

Offline zazics

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Re: New device support request (Kerui Door Sensor)
« Reply #2 on: February 01, 2018, 08:52:22 am »
I also buy a Kerui door sensor on Aliexpress (5?)
https://www.aliexpress.com/item/New-433mhz-Wireless-Door-window-Sensor-For-GSM-PSTN-Home-Alarm-System-Home-Security-Voice-Burglar/32285219054.html?spm=a2g0s.9042311.0.0.fFXBL8

and successfully add it to my Vera Plus using RFXtrx433E, following this procedure and restart Vera (during procedure): http://www.vesternet.com/resources/application-notes/apnt-116

Then, I had to activate X10 and Lightning4 (only those one and disable others) protocols using "RFXmngr.exe". That sensor only transmit "open status" but it's enough.  :)

Offline b_weijenberg

  • Full Member
  • ***
  • Posts: 128
  • Karma: +3/-1
Re: New device support request (Kerui Door Sensor)
« Reply #3 on: February 02, 2018, 04:49:28 am »
Correct, with Lighting4 and X10 enabled Kerui will be detected as a X10 security sensor.
The Kerui D026 reports the open and closed status:
https://nl.aliexpress.com/item/433MHz-Portable-Alarm-Sensors-Smart-Home-Detectors-Wireless-Window-Door-Magnet-Sensor-Detector-For-Home-Wireless/32499540451.html