Author Topic: Help my scenes just stoped working - tips on debugging  (Read 434 times)

Offline javafanboy

  • Newbie
  • *
  • Posts: 8
  • Karma: +0/-0
Help my scenes just stoped working - tips on debugging
« on: August 19, 2017, 04:26:05 am »
When logging into my Vera (lite) I noticed that USB logging had stopped working (the USB drive hade failed) so I replaced the drive with a freshly FAT formatted one and also upgraded to the latest firmware. After this logging started working again BUT my two scenes are no longer triggering. I can still control devices and everything else seems to work...

I only have to scenes so far - one to turn on lights when motion is detected and one to turn off when no movement has occurred. It has worked well for many months.

I would like to learn how to debug this kind of problems but need some tips where to start - good threads etc!

I have worked as a software developer so I can understand fairly technical information if I could just find it.

Should I expect some obvious entry in the log when my motion detector triggers or do I need to change log level for this to happen?

One odd thing I noticed once I got the logging to work was that I now have a lot of entries complaining about "poll list full" that I have not seen before. As a developer I do not like the (nil)/NONE printout either - nil is generally not a good sign (it shows a pointer without a value) but maybe that is "normal"? What does the "duplicate:1" tell me?
 
02   08/19/17 7:53:28.245   Device_Basic::AddPoll 6 poll list full, deleting old one <0x2b413680>
06   08/19/17 7:53:28.246   Device_Variable::m_szValue_set device: 6 service: urn:micasaverde-com:serviceId:HaDevice1 variable: PollRatings was: 5.00 now: 5.00 #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:1 <0x2b413680>
06   08/19/17 7:53:28.247   Device_Variable::m_szValue_set device: 6 service: urn:micasaverde-com:serviceId:ZWaveNetwork1 variable: LastPollSuccess was: 1503121983 now: 1503122008 #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:0 <0x2b413680>
06   08/19/17 7:53:28.248   Device_Variable::m_szValue_set device: 6 service: urn:micasaverde-com:serviceId:ZWaveNetwork1 variable: ConsecutivePollFails was: 0 now: 0 #hooks: 0 upnp: 0 skip: 0 v:(nil)/NONE duplicate:1 <0x2b413680>
04   08/19/17 7:53:33.244    <0x2b413680>
« Last Edit: August 19, 2017, 12:42:17 pm by javafanboy »