Author Topic: Scene Options  (Read 756 times)

Offline bmxer4l1fe

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Scene Options
« on: April 20, 2017, 03:06:13 am »
1) ability to run a scene only if multiple conditions are met. 

  Run scene when motion is detected on both device 1 and device 2.   Or between the hours of X. 

2) ability to run scenes based on a multi level sensor change:  and ability to set levels on multi level devices in a scene

example: light set from 100% to 50% on device 1,  set device 2 to device 1 value.

Offline Don Phillips

  • Hero Member
  • *****
  • Posts: 1382
  • Karma: +36/-35
Re: Scene Options
« Reply #1 on: April 20, 2017, 06:55:10 pm »
Take a look at the PLEG plug-in. It does AND logic and schedules.  Another option is to use the Virtual Switch and Combination Switch plug-in. They can be used to emulate AND. Schedules would be part of the scene logic. 
Vera 3, 1.7.1030, CT101, Everspring motion sensor, GE/Jasco switch, Leviton outlet, AeonLabs sensor, NuTone garage door, Blue Iris, Sricam SP011, iPhone locator, APCUPSD, VeraMate, VeraAlerts, PLEG, House Modes, Countdown Timer, DVR, Virtual/Multi Switch, Weatherunderground, LB60Z-1 bulb, Hue, Alexa