Author Topic: Fibaro Double Switch 2 FGS-223 ZW5 v3.2 don't work correct with VeraPlus  (Read 2190 times)

Offline atokle

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
On my VeraPlus I use the latest firmware version1.7.2608.

It was successfully added to the network, and in my GUI I see one main control and 2 child controls.
When using GUI to switch them on and off, all of them give "SUCCESS! Transmit was OK".

But what happends when I use them is:
Main control swiitch on/off lamp 1
Child control 1 don't switch anything
Child control 2 don't switch anything

The physical switches works as intended.

Main control show power consumption, but only for lamp 1


Offline tash

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Hi there,
Did you manage to resolve this issue?
I have the same.
After including the fibaro fgs-223 I have a main switch working and two Appliance Modules not working (not switching but showing sent success)
Regards,
tash

Offline Cor

  • Hero Member
  • *****
  • Posts: 1184
  • Karma: +7/-4
Have you done some research on the forum allready ?
http://forum.micasaverde.com/index.php/topic,38961.0/topicseen.html


Cor

Offline bavariatech

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
Re: Fibaro Double Switch 2 FGS-223 ZW5 v3.2 don't work correct with VeraPlus
« Reply #3 on: January 09, 2018, 11:32:11 am »
with verasecure running 7.0.24 it should work, i've tested it with 7.0.25b sucessfully

Offline Webeye

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Re: Fibaro Double Switch 2 FGS-223 ZW5 v3.2 don't work correct with VeraPlus
« Reply #4 on: January 14, 2018, 06:55:33 am »
Hi,

I'm making a review of the 223 but i can't get the S2 to work like it should.

Is this problem still not fixed? I'm running the latest firmware.

Thanks!

Offline kwieto

  • Hero Member
  • *****
  • Posts: 587
  • Karma: +22/-12
Re: Fibaro Double Switch 2 FGS-223 ZW5 v3.2 don't work correct with VeraPlus
« Reply #5 on: January 18, 2018, 06:34:44 am »
It is solved, both channels working and reporting power separately.

Offline Sorin

  • Administrator
  • Hero Member
  • *****
  • Posts: 923
  • Karma: +77/-8
[RESOLVED] Fibaro FGS-223 ZW5 v3.2 don't work correct with VeraPlus
« Reply #6 on: January 18, 2018, 08:00:34 am »
Indeed, later official firmware, solved all the incompatibility issues with this device.
Sorin M. ▾ Community Manager
Vera Control, Ltd. ▾ Smarter Home Control  ▾ support@getvera.com ▾www.getvera.com ▾ +1 (866) 966-2272

HOURS OF OPERATION for Customer Care Department - 24/7

Offline Sorin

  • Administrator
  • Hero Member
  • *****
  • Posts: 923
  • Karma: +77/-8
Hey Cript,

Please submit a ticket to our Customer Care team, to clarify and assist you with any possible issues.
Contact details are in my signature.
Sorin M. ▾ Community Manager
Vera Control, Ltd. ▾ Smarter Home Control  ▾ support@getvera.com ▾www.getvera.com ▾ +1 (866) 966-2272

HOURS OF OPERATION for Customer Care Department - 24/7