Author Topic: Amcrest NVR POE cameras  (Read 252 times)

Offline juchab

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-1
Amcrest NVR POE cameras
« on: June 21, 2017, 10:59:15 am »
Is it possible to add Amcrest POE cameras and NVR to Veralite or Vera Edge controller?

Thanks

Offline sommervi

  • Newbie
  • *
  • Posts: 18
  • Karma: +0/-1
Re: Amcrest NVR POE cameras
« Reply #1 on: August 19, 2017, 11:27:38 pm »
Amcrest ProHD 1080p 30FPS WiFi IP Security Camera IP2M-841
-Upgrade the camera firmware to V2.420.AC00.17.R from Amcrest?s website
-Copy the entire string below into notepad
http://192.168.1.2/port_3480/data_request?id=lu_action&serviceId=urn:micasaverde-co
m:serviceId:HomeAutomationGateway1&action=CreateDevice&deviceType=urn:schem
as-upnp-org:device:DigitalSecurityCamera:2&UpnpDevFilename=D_DigitalSecurityCam
era2.xml&Description=Amcrest&RoomNum=0&IpAddress=192.168.1.12&StateVariable
s=urn:micasaverde-com:serviceId:Camera1,URL=/cgi-bin/snapshot.cgi?1
urn:micasaverde-com:serviceId:HaDevice1,Commands=camera_full_screen,camera_ar
chive_snapshot&Username=admin&Password=admin&Reload=1
-Change http://192.168.1.2 to your Vera?s local IP address
-Change IpAddress=192.168.1.12 to the IP address of your Amcrest Camera
-Change Username=admin to your username on your Amcrest Camera
-Change Password=admin to your password on your Amcrest Camera
-Copy the entire string from notepad and paste it into a web browser while on the same
network as the Vera controller.
-After a few minutes you should see the following in your browser
 

-After a few minutes you should now see the Amcrest camera added to the Vera