Author Topic: Amcrest NVR POE cameras  (Read 596 times)

Offline juchab

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-1
Amcrest NVR POE cameras
« on: June 21, 2017, 10:59:15 am »
Is it possible to add Amcrest POE cameras and NVR to Veralite or Vera Edge controller?


Offline sommervi

  • Newbie
  • *
  • Posts: 18
  • Karma: +0/-1
Re: Amcrest NVR POE cameras
« Reply #1 on: August 19, 2017, 11:27:38 pm »
Amcrest ProHD 1080p 30FPS WiFi IP Security Camera IP2M-841
-Upgrade the camera firmware to V2.420.AC00.17.R from Amcrest?s website
-Copy the entire string below into notepad
-Change to your Vera?s local IP address
-Change IpAddress= to the IP address of your Amcrest Camera
-Change Username=admin to your username on your Amcrest Camera
-Change Password=admin to your password on your Amcrest Camera
-Copy the entire string from notepad and paste it into a web browser while on the same
network as the Vera controller.
-After a few minutes you should see the following in your browser

-After a few minutes you should now see the Amcrest camera added to the Vera

Offline jamin2bmp

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Re: Amcrest NVR POE cameras
« Reply #2 on: November 29, 2017, 08:32:28 am »
Thanks Sommervi,

I've been trying to get my Amcrest cameras to work with Vera for a long time and your script has simplified the whole thing.

Once again, Thankyou.