Author Topic: Display of Appliance Relays on Vera Device screen  (Read 251 times)

Offline nicfurr

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
Display of Appliance Relays on Vera Device screen
« on: July 28, 2017, 05:44:08 am »
Having installed a Fibaro 2-channel relay 3 icons are displayed, one that relates to the complete unit and one for each of the channels.
If one looks into the "advanced" tag, the first has an id of (say) 76 with a parent of 1 and the others (say) 77 & 76 and 78 & 76 respectively.
If I were to change the parent id of 77 and 78 to 1, could I then delete 76 leaving 77 and 78 in place and operating as before?

Offline reneboer

  • Hero Member
  • *****
  • Posts: 1078
  • Karma: +55/-30
Re: Display of Appliance Relays on Vera Device screen
« Reply #1 on: July 28, 2017, 08:05:36 am »
Hi,

No you cannot do that. The 77 and 78 are child devices to the 76. If you change the values they probably get reset or it will stop working.

Cheers Rene
2xVeraLite, VeraEdge, openLuup, ALTUI, 20 switches, 10 dimmers, 20 sensors, 10 scene controllers, 1 Harmony Hub, many plug-ins. Not enough time.

Offline RichardTSchaefer

  • Master Member
  • *******
  • Posts: 9497
  • Karma: +721/-133
    • RTS Services Plugins
Re: Display of Appliance Relays on Vera Device screen
« Reply #2 on: July 28, 2017, 09:15:27 am »
A good rule to live by ...
Stay out of the Advanced tab unless you know what you are doing or you really trust what someone else tells you ...
There is bad information out there ... so you have to discern what is good.