Author Topic: UI7 wrongly reports intermediate position of Fibaro FGRM-222 Roller Shutter  (Read 91 times)

Offline papapout

  • Sr. Newbie
  • *
  • Posts: 23
  • Karma: +1/-0
VERAPLUS with Latest UI7 firmware 1.7.2935.

When I send Luup command
luup.call_action("urn:upnp-org:serviceId:Dimming1", "SetLoadLevelTarget", {newLoadlevelTarget = "20"}, DeviceId)
Or when I move the slider on UI7 screen to set LoadLevelTarget variable to 20 pct then roller shutter moves to 20 pct and LoadLevelStatus variable reports 20 as expected.

The issue is that each time there's a device poll then LoadLevelStatus reports 100 (LoadLevelTarget stays on 20) without any change on roller shutter.
It provides an erroneous position of the shutter on UI7 screen/luup.variable_get command that shows 100 but roller shutter is on 20 pct !

When LoadLevelTarget is set to 0 or 100 via Luup command/UI7 screen then LoadLevelStatus stays unchanged when a poll is done.

I don't think it comes from modules as it runs fine with UI5 on VERA3 and same modules.

Could it be an UI7 bug ?

Offline papapout

  • Sr. Newbie
  • *
  • Posts: 23
  • Karma: +1/-0
As adivised in some other posts I set Device Poll Variable to 0 but it is a work arround not a fix.

UI7 seems not be able to read properly returned value for LoadLevelStatus variable  :(