We have moved at community.getvera.com

Author Topic: openHAB 2 MiOS setup  (Read 1678 times)

Offline mhendu

  • Newbie
  • *
  • Posts: 18
  • Karma: +0/-0
openHAB 2 MiOS setup
« on: April 11, 2017, 12:16:41 am »
I purchased a Z-Wave USB stick but when I saw that I could potentially have my Vera Lite serve as the Z-Wave controller in openHAB I started trying to configure it. I've followed various guides but can't get it to work correctly. I'm using the latest snapshot of openHAB 2 and have installed the two mios bindings and updated the configuration files with my Vera's IP address. I've generated a house.items file two different ways (one using a browser application in Windows, the other using the scripts I found on the miCasaVerde forums) and tried each file in the appropriate folder but openHAB will not show any items from the Vera (I don't even have an items option in Paper UI and HABPanel does not include any Vera items in the drop-down menus).

Since other folks in the forums seem to have had success by this point I'm sure I'm missing something obvious but can't figure out what it is - any help would be appreciated.

Offline markoe

  • Full Member
  • ***
  • Posts: 137
  • Karma: +4/-3
Re: openHAB 2 MiOS setup
« Reply #1 on: May 26, 2017, 11:37:32 am »
I am stucked too

1. installed the open hub to separate rasbian server
2. get it up and running and go thou the traning with Network bindings
3. install mios binging
4. modified the /etc/openhab2/services/mios.cfg file to point my vera ip

Hope that vera devices will pop up to paperui inbox , but they did not

Offline stefaanbolle

  • Jr. Member
  • **
  • Posts: 52
  • Karma: +4/-1
Re: openHAB 2 MiOS setup
« Reply #2 on: May 27, 2017, 03:46:56 pm »
PaperUI does not work with Mios binding since it is a version 1.9 binding which does not know the thing concept.
You have to conigure everything manually. See the openhab 1.8 wiki for the mios binding since all config tasks are equal for OH2