Vera Plus Firmware update

[Clems]

Hi,

Yesterday I would like to upgrade the latest firmware, but the Vera told me that :

Code: [Select]

/usr/bin/GetLatestVersion.sh: line 139: can't create /etc/cmh/version_latest: No space left on device

So what is the way to free some memory space, like log, cache, temps, etc ?


thank you !!

[therealdb]

Look at this thread
http://forum.micasaverde.com/index.php/topic,84365.0/topicseen.html

[Clems]

you are right I faced the same problem on logging and offline controller.
I will check your link.


Thank you !

[JohnRob]

Hi,

After reading of multiple users with low memory issues (on VeraPlus not on the users).  I was wondering what the "System Monitor" plugin reports for free memory (assuming one has it installed).


I have had no memory issues (yet) and the system monitor reports
  "Mem Available 192620 kilo bytes" 

What do others have?

[rafale77]

You are reporting the ram, not the storage. The firmware problem is a shortage of storage flash memory.

[HSD99]

You are reporting the ram, not the storage. The firmware problem is a shortage of storage flash memory.

If you have ALTUI installed, look under Misc---OsCommand---Free Space, and see what the /overlay partition shows as free space. If you can SSH into the Vera, run

df -h

the "disk free" command. It will give the same information.  The FLASH memory is the "disk", and is what is getting too full.

[JohnRob]

@HSD99

Thanks, I found the df -h command.

Interesting thing,  I copied the results of the df -h command before my recent update and after.  There was virtually no change.   I do however have a relatively simple system.

• 12 Z-Wave devices (no other devices)
  a few associations
  
  datamine2
  Multistring
  MySensors
  Wunderground.

[fyford]

http://forum.micasaverde.com/index.php/topic,52735.90.html