Author Topic: fibaro dimmer 2 FGD212 S2 scene control with PLEG solution  (Read 119 times)

Offline gijs

  • Newbie
  • *
  • Posts: 18
  • Karma: +3/-0
fibaro dimmer 2 FGD212 S2 scene control with PLEG solution
« on: August 11, 2017, 09:44:37 am »
For al long time is did not manage to use the fibaro dimmer 2 S2 button to toggle the state of an other device.
Scenes did not fire at all, fired twice or even if i pushed the S1 switch.

My setup:
fgd212 scene function activated
S1 connected to a momentary switch to dimm a light bulb connected to the dimmer
S2 connected to a momentary switch to fire scenes via single and double click (toggle the state of two different wall plugs) 


Now i found a solution which works perfect for me.  :) Most solutions on this forum make use of sl_SeneActivated I did not fully understand why because this device parameter never seemed to change. I tied a different route see attachment
I hope it helps someone.





Offline m1cke

  • Newbie
  • *
  • Posts: 9
  • Karma: +1/-0
Re: fibaro dimmer 2 FGD212 S2 scene control with PLEG solution
« Reply #1 on: August 15, 2017, 05:16:48 pm »
Hi
Got the same issue as you used to have, when I press S1 to turn on the lamp that has the load on the dimmer my window lights toggle (S2)
Tried your sollution but I have the same issue. When I click S1 it toggles the state of S2.
Can you see if I did something wrong?
Thanks

Offline gijs

  • Newbie
  • *
  • Posts: 18
  • Karma: +3/-0
Re: fibaro dimmer 2 FGD212 S2 scene control with PLEG solution
« Reply #2 on: August 15, 2017, 05:29:52 pm »
Try to remove _ LastSceneId in your 2nd condition on both places.

Offline m1cke

  • Newbie
  • *
  • Posts: 9
  • Karma: +1/-0
Re: fibaro dimmer 2 FGD212 S2 scene control with PLEG solution
« Reply #3 on: August 16, 2017, 06:09:35 am »
THANK YOU!!
Works great!!