We have moved at community.getvera.com

Author Topic: Pairing multiple Somfy blinds without orignal remote but with Composio remote  (Read 788 times)

Offline jorisdekloris

  • Sr. Newbie
  • *
  • Posts: 25
  • Karma: +0/-1
I'm trying to pair my Somfy blind that are currently controled by a Composio remote (http://www.automatedshadeinc.com/files/controls-somfy/composio-rts-instructions.pdf).

I use these instrcutions: http://www.vesternet.com/resources/application-notes/apnt-79

All goes well until: 'Press and hold the recessed "Programming Button" on the original Remote Control until the blind "jogs" (moves up and down briefly).'

The blinds do not move and the receiver doesnt receive anything. I think it has to do with the Composio not sending the command to a specific blind. Hence the blind do not move hance the RFXtrx doenst receive the signal.

So - How do i go about in getting the blind to pair with the RFXtrx?

Offline b_weijenberg

  • Full Member
  • ***
  • Posts: 129
  • Karma: +3/-1
Is the motor programmed with another remote as primary?

If you don't have the primary remote reset the motor to factory settings and add the remote and RFXtrx.

Offline jorisdekloris

  • Sr. Newbie
  • *
  • Posts: 25
  • Karma: +0/-1
I managed to get it working. You need to press the Programming button right after you moved the blind. Setting low and high limits was done with a small white screw on the motor itself.