Author Topic: Bridging Vera Plus and Vera Edge  (Read 302 times)

Offline JCB79

  • Newbie
  • *
  • Posts: 6
  • Karma: +1/-0
Bridging Vera Plus and Vera Edge
« on: September 01, 2017, 10:08:33 pm »
Based on posts within this forum and a couple FAQ's from main site, I have tried to bridge a Plus and an Edge using UPnP.  I have added the Edge to the Plus via UPnP.  Then, I have tried "Controller Shift" first on the Edge, and later on the Plus, with no luck from either effort; both devices remain in a state reporting:


*I do note that House Id differs across the devices and that they both report Node 1 SUC 1.


-Edge and Plus are on the same LAN with same manual IP configurations (pointing to same subnet, gateway and DNS server). 

-Neither device has WiFI enabled.

-Both controllers are to date, running 1.7.3014.

-Though I typically access the controller's by direct IP, when I access the generic logon screen, both controllers are accessible through the same account/same page.

To be candid, I am stumped and I am willing to bet there is something painfully simple and painfully obvious that I am missing.... 

May I trouble those who know the path to help me find my way?

Thank You In Advance,


Offline Sorin M.

  • Administrator
  • Hero Member
  • *****
  • Posts: 772
  • Karma: +62/-5
Re: Bridging Vera Plus and Vera Edge
« Reply #1 on: September 04, 2017, 03:01:09 pm »
UPNP bridging is not related to the z-wave settings in any way. So you only have to focus on the upnp/lan side of the units.

As prerequisites both Vera's need to be in the same subnet. On the, soon to be master unit, you have to go to Devices->Add devices-> Upnp devices and follow the wizard to bridge the units through LAN. If you encounter any difficulties, don't hesitate to involve our support team as well.(see my signature.)
Sorin M. ▾ Community Manager
Vera Control, Ltd. ▾ Smarter Home Control  ▾ ▾ ▾ +1 (866) 966-2272

HOURS OF OPERATION (Pacific Time Zone, UTC -8 )
Monday - Friday   12:00 am ? 06:00 pm
Saturday - Sunday   04:00 am ? 06:00 pm

Offline JCB79

  • Newbie
  • *
  • Posts: 6
  • Karma: +1/-0
Re: Bridging Vera Plus and Vera Edge
« Reply #2 on: September 09, 2017, 01:08:06 pm »
Thank You John,

I have reached out to Support as advised.

Much appreciated,