Author Topic: Vera, Autelis and Amazon Echo on a Jandy iAqualink  (Read 2372 times)

Offline rstrouse

  • Hero Member
  • *****
  • Posts: 804
  • Karma: +27/-9
Re: Vera, Autelis and Amazon Echo on a Jandy iAqualink
« Reply #15 on: February 15, 2018, 11:48:33 am »
Awesome let me know if you have any other issues.
1xVera3 1.7.619, 4xLinear WT00Z, 3xLinear WS15Z, 1xLeviton VRCZ4, 10xCooper RF9540, 1xLeviton VRFI10, 1xLeviton VP00R, 2xLinear GD00Z-4, 1xGE/Jasco 45612, 1xGE/Jasco 45610,  4xGE/Jasco 45605, 2xYale YRD220-ZW-619, 1xCaddx NX584, Autelis Intellitouch Pool Control, OpenSprinkler

Offline arutigliano

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Re: Vera, Autelis and Amazon Echo on a Jandy iAqualink
« Reply #16 on: March 17, 2018, 08:18:31 pm »
I am having the same problem. I can connect to Autelis via web browser but no connection with Vera. Under configuration it says run state "255 - Connection Error".

Plugin is v 1.0
Autelis is 1.6.13


Anyone have any ideas??

Offline rstrouse

  • Hero Member
  • *****
  • Posts: 804
  • Karma: +27/-9
Re: Vera, Autelis and Amazon Echo on a Jandy iAqualink
« Reply #17 on: March 19, 2018, 11:44:38 am »
@arutigliano,

Please double check the ip address to your Autelis unit is correct on the configuration tab as well as the username and password for the Autelis device.  The 255 code is an error reported when the plugin tries to talk to Autelis and is refused.  Also, open up a browser window and type in the address bar http://<ip address of your Autelis>/status.xml

This will give a more detailed error is the entries on the configuration tab are correct.
1xVera3 1.7.619, 4xLinear WT00Z, 3xLinear WS15Z, 1xLeviton VRCZ4, 10xCooper RF9540, 1xLeviton VRFI10, 1xLeviton VP00R, 2xLinear GD00Z-4, 1xGE/Jasco 45612, 1xGE/Jasco 45610,  4xGE/Jasco 45605, 2xYale YRD220-ZW-619, 1xCaddx NX584, Autelis Intellitouch Pool Control, OpenSprinkler

Offline rayp

  • Jr. Member
  • **
  • Posts: 63
  • Karma: +3/-0
Re: Vera, Autelis and Amazon Echo on a Jandy iAqualink
« Reply #18 on: March 20, 2018, 01:18:05 am »
I have been reading and reading here. Lots of great information. I am looking to send simple pool commands to my iAqualink via Amazon Echo (Alexa). In my reading it seems I need to get the Autelis controller attached and the plugin developed for Jandy. I am not sure how Alexa would fit in here. Any suggestions or information?

THANKS!

I had some limited success with this: https://github.com/evancg37/Alexa-Pool-Control
I used a Raspberry Pi to run the Python code but didn't pursue it further. The author was great in responding but he's a student so his time was limited.
It uses IFTT also so that is the link to the Vera. Maybe someone will have more time to work on it!