Author Topic: UI7 ▾ Software Update ▾ Version 7.0.23  (Read 5551 times)

Offline robie

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-0
Re: UI7 ▾ Software Update ▾ Version 7.0.23
« Reply #60 on: December 19, 2017, 08:24:52 pm »
after update, i lost my online connection.  it works within the home network, it indicates that internet is ok under network settings but i can't login my vera plus.

Offline robie

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-0
Re: UI7 ▾ Software Update ▾ Version 7.0.23
« Reply #61 on: December 19, 2017, 11:56:36 pm »
seems have to be used to performing a complete reinstall of all devices whenever i upgrade :-(

doing a complete reboot now and reconfig of 55 devices plus scenes.  there should be a better way of upgrading

Offline Forzaalfa

  • Jr. Member
  • **
  • Posts: 73
  • Karma: +3/-0
Re: UI7 ▾ Software Update ▾ Version 7.0.23
« Reply #62 on: December 20, 2017, 02:06:07 am »
There is; make a backup first!

I didnt have to use it now, but the backup should always be made just in case.
Vera Plus - RFXtrx433e

Offline robie

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-0
Re: UI7 ▾ Software Update ▾ Version 7.0.23
« Reply #63 on: December 20, 2017, 04:38:57 am »
made a backup but i lost the names of my devices when i restored it.

...and the better way should be seamless and worry free

Offline Forzaalfa

  • Jr. Member
  • **
  • Posts: 73
  • Karma: +3/-0
Re: UI7 ▾ Software Update ▾ Version 7.0.23
« Reply #64 on: December 20, 2017, 04:57:37 am »
Agreed!

It seems many ppl get problems due to lack of storage space or memory for the update process, this is something the installer(SW) should check automatically before wiping the FW..
Vera Plus - RFXtrx433e

Offline erkme73

  • Sr. Member
  • ****
  • Posts: 333
  • Karma: +11/-11
Re: UI7 ▾ Software Update ▾ Version 7.0.23
« Reply #65 on: December 21, 2017, 11:05:55 pm »
Has the update been pulled?  All day I've been redirected on first login to the firmware update section.  I've skipped it  because I was too caught up in other changes.  Then, this evening, now that I have some free time, I figured I'd proceed with the update.

As I log into the LAN IP of the Vera, I get the re-direct to the firmware update page.  Yet, there I see this:

Quote
Checking if there is a newer firmware version available

 You are running the latest version 1.7.3231

Now, I'm certain I did not perform the upgraed - even accidentally - as it always is a multi-step process (do you want to backup?  Keep settings? etc).  Yet, despite my Vera thinking I'm on the latest version, I still get the re-direct to the firmware  settings page on each new login. 

Any idea why the disconnect?

Offline Don Phillips

  • Hero Member
  • *****
  • Posts: 995
  • Karma: +23/-24
    • Worthington Engineering, Inc.
Re: UI7 ▾ Software Update ▾ Version 7.0.23
« Reply #66 on: December 22, 2017, 06:02:24 pm »
7.0.24 was pulled a couple of days ago and they hope to repost the update in the next few days.
Vera 3, UI7 1.7.947, CT101 t-stat, Everspring motion detector, GE/Jasco switch, Leviton outlet, AeonLabs door sensor, NuTone garage door, Blue Iris, Sricam SP011, iPhone locator, APCUPSD, VeraMate, VeraAlerts, PLEG, House Modes, Countdown Timer, DVR, Virtual & Multi Switch, Weather, Sys. Mon.

Offline tzontchev

  • Sr. Newbie
  • *
  • Posts: 30
  • Karma: +0/-0
Re: UI7 ▾ Software Update ▾ Version 7.0.23
« Reply #67 on: December 29, 2017, 04:07:15 pm »
I did update my VeraPlus with 7.0.24 and my unit is offline ever since. It is in a remote location and I can be there only in 4 months. 

The problem that I have is, that if my controller is bricked, I will be out of warranty.  The warranty runs out at the end of February, 2018 and I can physically access the unit only in April 2018

I will never ever again update remotely.

Offline Don Phillips

  • Hero Member
  • *****
  • Posts: 995
  • Karma: +23/-24
    • Worthington Engineering, Inc.
Re: UI7 ▾ Software Update ▾ Version 7.0.23
« Reply #68 on: December 29, 2017, 08:07:03 pm »
Others had similar issues - I seem to remember someone having to drive like 400 miles each way to unbrick his unit in a vacation house.
Vera 3, UI7 1.7.947, CT101 t-stat, Everspring motion detector, GE/Jasco switch, Leviton outlet, AeonLabs door sensor, NuTone garage door, Blue Iris, Sricam SP011, iPhone locator, APCUPSD, VeraMate, VeraAlerts, PLEG, House Modes, Countdown Timer, DVR, Virtual & Multi Switch, Weather, Sys. Mon.

Offline JJ10

  • Newbie
  • *
  • Posts: 18
  • Karma: +1/-0
Re: UI7 ▾ Software Update ▾ Version 7.0.23
« Reply #69 on: January 05, 2018, 08:25:04 am »
I've had the same issues with the firmware. After reloading a backup everything is working again.
Funny to read in the forum that there are/where problems with the new firmware, i have contacted Vera Support several times now and they dont mention anything about the pulled firmware upgrade??

Iam still waiting on a answer why i cant download the latest firmware via my Vera Plus controller cause its still on 1.7.3232 and 1.7.3453 should be the latest version hahaha.

This is the second time that the upgrade causes a lot of problems on my vera plus, i hope they manage to fix this for the next upgrades.

Offline wsenf

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Re: UI7 ▾ Software Update ▾ Version 7.0.23
« Reply #70 on: January 10, 2018, 06:12:00 am »
where can i find the url to downlaod the latest firmware for my Vera3?

I know it's here somewhere but i just can't seem to find it.

so sorry for being a noob.
Had my vera3 working perfectly for years but now all of a sudden my link to mt hue bridge doesn't work anymore.

so i want to go to ui7