We have moved at community.getvera.com

Author Topic: Some problems with Ivera  (Read 2482 times)

Offline itgo

  • Sr. Newbie
  • *
  • Posts: 36
  • Karma: +0/-0
Some problems with Ivera
« on: December 29, 2010, 06:26:12 am »
Hello, I installed Ivera free to do some tests in IVera2 but i  found a number of problems  that I put on the list:

1) After setting up a scene in Vera and her later deleted, ivera does not update the deletion and the new scenes are not displayed.

2) I do not see the cam in ivera Panasonic BL-C111 (correctly displayed on Vera)

3) is not detected the Danfoss thermostat


Can someone help me with this?

Thanks
Vera2 (111047)- Merten (Danfoss) 509201 - Merten remote 506923 - Merten radio 4 gang 506004 - Merten switch 2x 507502 - Merten switch x1 507501 -Merten radio pliug adapter dimmer 508619 - Merten Radio-Argus 220 sensor 509519 - Merten Blind control  580698 and 504546 - Merten - Panasonic  BL-C111

Offline Ap15e

  • Beta Testers
  • Hero Member
  • *****
  • Posts: 1998
  • Karma: +12/-0
Re: Some problems with Ivera
« Reply #1 on: December 30, 2010, 04:28:37 am »
3) The device type of the Danfoss RA plus-w is 'urn:schemas-micasaverde-com:device:GenericIO:1'. Maybe Ivera does not yet support this device type?

Offline iVera

  • Moderator
  • Jr. Member
  • *****
  • Posts: 96
  • Karma: +0/-0
Re: Some problems with Ivera
« Reply #2 on: January 09, 2011, 09:05:18 pm »
Hello,

   The free version of iVera only reports 2 lights and 2 scenes. All extra devices on your Vera (thermostat, sensors, camera, door locks, window treatment) will only be accessible from the full version.

With respect to 1) there was an issue found which would not automatically update deleted scenes but doing a "Reset All Settings" (in your iPhone's Settings application, find iVera, enable reset) should work around the problem for now.

Let me know if you have other questions.
iVera ... control your house!
www.thinkiwi.com